Toolrr - Wire Shelving

Accessories Add-On Kits Starter Kits Wire Carts

Wire Shelving tools and information

Find Wire Shelving at best prices and buy!

Eclipse 200-010 Precision Wire Stripper

Eclipse 200-010 is a Precision Wire Stripper. This Wire Stripper has Plier nose and Cutter jaws. It has Soft grip handles for better handling and Spring return.

Eclipse 200-001 Precision Wire Stripper

Eclipse 200-001 is a Precision Wire Stripper. This Wire Stripper has Plier nose and Cutter jaws. It has Soft grip handles for better handling and Spring return.

Grip 57222 7Inch Pro Wire Stripper and Cutter

Drop forged, heat trated steelliSpring loaded Easily and accurately cuts and strips wire Cuts wire from 0-1 thick

DeWalt DW4904 6Inch Crimped Wire Wheel Brush

The DeWalt DW4904 is a 6" Crimped Wire Wheel Brush. It has highly specified wire grades which are constructed with internal holding plate to ensure consistency and safety. The crimped wire wheel brush is constructed for even balance which provides smooth performance. Wire is 100% inspected to meet demanding quality specifications.

Eclipse 300-077 Lunar Series Ratcheted Wire Ferrule Crimper for Wire Ferrules AWG 6-2

This is a ratcheted crimper for insulated and noninsulated wire ferrules for sizes AWG 6 to 2.

Grip 86006 3Inch Knotted Wire Cup Brush

Carbon steel 3 inch x 5/8 inch - 11 inch arbor sizeHighly specified wire grades constructed with internal holding plate to ensure consistency and safetyConstructed for even balance which provides smooth performance .023 wire gauge - wire is 100% inspected to meet quality specifications

Eclipse 200-072 Self Adjusting Wire stripper

Eclipse 200-072 is a Self Adjusting Wire stripper. This is also called as Economy Self-Adjusting Stripper because it is the Lower cost version of the 200-070 Heavy Duty Stripper. It is the Automatic Wire Stripper for AWG 26-10.

Max TW1525-PC Polyester Coated Wire 16 Gauge

Max TW1525-PC is a 16 Gauge Polyester Coated Wire for RB650A Re-Bar Tying tool.

Max TW897EG 21-Gauge Electro Galvanized wire

Max TW897EG is a 21-Gauge Electro Galvanized wire for models RB392, RB395 and RB213 Re-Bar Tying tool.

Max TW1525 16-Gauge Black Annealed Wire

Max TW1525 is a 16-Gauge Regular Steel Black Annealed Tie Wire for RB650A Re-Bar Tying tool.

Max TW897 Standard Tie Wire for RB392

Max TW897 is a Standard Tie Wire for RB392 and RB213 Re-Bar Tying tool.

Grip 27135 10Inch Wire Brush

A must for use in the house or garage. Clean stubborn areas with this tough wire brush.Steel wires are tough enough to scrape off dirt, rust, paint, and grime. Ideal for cleaning barbecues.Hardened and tempered carbon steel bristles. Plastic handle for a comfortable grip.

Eclipse 300-001 Wire Ferrule Ratcheted Crimper for AWG 22-10

Eclipse 300-001 is a Wire Ferrule Ratcheted Crimper for AWG 22-10. This tool Crimps insulated & noninsulated wire ferrules. It is a Lunar crimp frame with die set.

DeWalt DW4906 8Inch Crimped Bench Grinder Wire Wheel Brush

The DeWalt DW4906 is a 8" Crimped Bench Grinder Wire Wheel Brush. The wire wheel brush is manufactured using highly specified wire grades and is constructed for perfect balance. Every wheel is properly inspected to ensure that each of them meets the prescribed quality standard and one of the highest wire content counts in the industry. The bench grinder wheel brush is available in crimped wire for lighter duty applications such as deburring, weld cleaning, rust removal and surface preparation.

DeWalt DW4930 4Inch x 5/8-11Inch Full Cable Twist Wire Wheel

The DeWalt DW4930 is a 4 x 5/8-11 Full Cable Twist Wire Wheel. The brush has highly specified wire grades which are constructed with internal holding plate to ensure consistency and safety. It is constructed for even balance which provides smooth performance. The wire is 100% inspected to meet demanding quality specifications.

DeWalt DW4937 6Inch Full Cable Twist Wire Wheel, 12500 RPM

The DeWalt DW4937 is a 6" Full Cable Twist Wire Wheel. The wheel has highly specified wire grades which are constructed with internal holding plate to ensure consistency and safety. It is constructed for even balance which provides smooth performance. Its wire is 100% inspected to meet demanding quality specifications.

Max TW897-PC 21 Gauge X 317' Tie Wire

-The Max TW897-PC is a 21 Gauge X 317 Tie Wire. The plastic coated rebar tying wire spools suitable for the Max RB395 & RB215 tools. It has 50 coils of 21 gauge plastic coated wire in each box.

Eclipse 300-010 Crimper, Ratcheted, Wire Ferrules 20-10 AWG

Eclipse 300-010 is a Ratcheted Wire Ferrules Crimper for 20-10 AWG. This ratcheted crimper is used for insulated and noninsulated wire ferrules for sizes AWG 20 to 12. This Crimper has a Ratcheting action for perfect crimps.

Irwin 0502L3 10Inch Locking Plier with Wire Cutter

The Irwin 0502L3 is a Curved Jaw Locking Plier with Wire Cutter. It measures 10 and has a jaw adjustment range up to 1-7/8, locks instantly, releases quickly and adjusts to pliers action. It features curved jaws, knurled tips and wire cutters are able to cut a 1/4 bolt. The involute jaw curve permits user to put tremendous pressure on four points of any style nut or bolt head.

DeWalt DW4920 3Inch x 5/8Inch-11 Crimped Cup Wire Brush

The DeWalt DW4920 is a 3" x 5/8"-11 Crimped Cup Wire Brush. It has highly specified wire grades which are constructed with internal holding plate to ensure consistency and safety. The crimped cup wire brush is constructed for even balance which provides smooth performance. The wire is 100% inspected to meet demanding quality specifications.

Jet JW1035 5InchX10' Clear Wire Reinforced Dust Collection Hose

-5-inch by 10-foot clear, wire-reinforced dust collection hoses are ideally suited for dust removal because of their strength, durability, and flexibility.

Eclipse 300-145 Ergo-Lunar Crimper for Wire Ferrules AWG 10-6

Eclipse 300-145 is a Ergo-Lunar Series Crimper for crimping AWG 10-6 Wire Ferrules.

Eclipse 300-149 Crimper - Wire Ferrules AWG 22-10 - Single Cavity Tool

Eclipse 300-149 is a Ratcheted Wire Ferrules Crimper for AWG 22-10. It is a Single Cavity Tool in which means, insert the wire ferrule into the single cavity design, the tool detects the ferrule size from 22 to 10 AWG and crimps with the appropriate force using Omega Spring Technology.

Black & Decker 70-613 6-Inch Coarse Wire Wheel for Wood and Metal

The Black & Decker 70-613 is a Coarse Crimped Wire Wheel for bench grinders. The 70-613 has a 6" diameter. The coarse wires are specialized for use on wood and metal.

Irwin® Vise-Grip® 5WR Curved Jaw Locking Plier with Wire Cutter

Convenient wire cutter, involute jaw curveAdjusting screw gives exacting pressure, jaw adjustment; 0 - 1-1/4Guarded release helps keep work safe and fast

Jet JW1036 6Inch x 10' Clear Wire Reinforced Dust Collector Hose

This is a Jet JW1036 6 x 10 Clear Wire Reinforced Dust Collector Hose. 6-inch by 10-foot clear, wire-reinforced dust collection hoses are ideally suited for dust removal because of their strength, durability, and flexibility.

Hobart Welders H305406R22 E-70S-6 .030Inch Diameter Solid Carbon Steel Welding Wire

The Hobart Welders H305406R22 E-70S-6 is a .030 Diameter Solid Carbon Steel Welding Wire. The solid wire must be used with CO2 and C25 shielding gas. It is great for construction work, farm implement fabrication and general shop applications.

Jet JW1034 4Inch x 10' Clear Wire Reinforced Dust Collector Hose

This is a Jet JW1034 4 x 10 Clear Wire Reinforced Dust Collector Hose. 4-inch by 10-foot clear, wire-reinforced dust collection hoses are ideally suited for dust removal because of their strength, durability, and flexibility.

Senco SQS55 Heavy Wire Stapler

The SENCO SQS55 Stapler has all the power and speed needed for the toughest 15-Gauge staple framing and sheathing applications. Designed with todays harder woods and laminates in mind, this rugged stapler will stitch the full line of SENCO 15-Gauge staples.

Irwin® Vise-Grip® 9LN 9Inch Long Nose Locking Plier Set with Wire Cutter

9 with a jaw adjustment up to 2-7/8Curved jaws, wire cutterLock on instantly and release quickly

Irwin® Vise-Grip® 4LN 4Inch Long Nose Locking Plier with Wire Cutter

4 with a jaw adjustment 0 - 1-5/8Curved jaws, wire cutterLock on instantly and release quickly

Irwin® Vise-Grip® 6LN 6Inch Long Nose Locking Plier with Wire Cutter

6 with a jaw adjustment up to 2-1/4Curved jaws, wire cutterLocks on instantly and releases quickly

Irwin® Vise-Grip® 4WR 4Inch Curved Jaw Locking Plier with Wire Cutter

Convenient wire cutter, involute jaw curveAdjusting screw gives exacting pressure, jaw adjustment; 0 - 15/16Guarded release helps keep work safe and fast

Irwin® Vise-Grip® 7WR 7Inch Curved Jaw Locking Plier with Wire Cutter

Convenient wire cutter, involute jaw curveAdjusting screw gives exacting pressure, jaw adjustment; 0 - 1-5/8Guarded release helps keep work safe and fast

Eclipse 300-097 Lunar Series Die Set - Wire Ferrules AWG 22-10

Eclipse 300-097 is a Lunar Series Die Set. This is used for Crimping Uninsulated Wire Ferrules of AWG 22-10. This is used as replacement Crimp Die Set for Eclipse CrimpPro Crimper frame. This die set is also included in 902-162 CrimpPro Offset Crimper tool set. This die set can also be used with Ergo-Lunar Crimp Frame 300-096 and Lunar Crimp Frame 300-054.

Senco SNS44XP Heavy Wire Construction Stapler

The SNS44XP from SENCO has excellent power, speed and balance to handle the most demanding applications. Designed for construction, remodeling and in-plant industrial.

Hobart Welders Weld-It H305406-R19 ER70S-6 Solid Carbon-Steel Welding Wire - .030Inch, 2 lbs.

Hobart Welders Weld-It H305406-R19 is a Solid Carbon Steel Welding Wire. Sound, porosity-free welds with powerful deoxidizers for your work with shielding gases. Great for construction work, farm implement fabrication, shaft buildup, tanks, truck bodies and general shop applications with poor fit-up or rusty, oily plates.

Hobart Welders Weld-It H222108-R19 E71T-11 Flux Cored/Carbon Steel Welding Wire - .035Inch, 2 lbs.

Hobart Welders Weld-It H222108-R19 is a Flux-Cored Welding Wire. Great in single- or multi-pass welds particularly on thin-gauge mild or galvanized steel. Typically used for light structural, machinery part fabrication, prefab construction, railroad car repair, short assembly welds, tanks and general fabrication.

Hobart Welders Weld-It H222106-R19 E71T-11 Flux Cored/Carbon Steel Welding Wire - .030Inch, 2 lbs.

Hobart Welders Weld-It H222106-R19 is a Flux-Cored Welding Wire. Great in single- or multi-pass welds particularly on thin-gauge mild or galvanized steel. Typically used for light structural, machinery part fabrication, prefab construction, railroad car repair, short assembly welds, tanks and general fabrication.

Hobart Welders Weld-It H222108-R22 E71T-11 Flux Cored/Carbon Steel Welding Wire - .035Inch, 10 lbs.

Hobart Welders Weld-It H222108-R22 is a Flux-Cored Welding Wire. Great in single- or multi-pass welds particularly on thin-gauge mild or galvanized steel. Typically used for light structural, machinery part fabrication, prefab construction, railroad car repair, short assembly welds, tanks and general fabrication.

Hobart Welders Weld-It H381806-R18 ER4043 Aluminum Welding Wire - .030Inch, 1 lb.

ER4043 is a general-purpose type aluminum welding wire. It contains silicon additives, which result in improved fluidity (wetting action) of the weld pool and also produces a weld less sensitive to cracking. Its bright weld finish makes it a popular choice of welders. It can be used to weld various grades of aluminum.

Hobart Welders Weld-It H305401-R19 ER70S-6 Solid Carbon-Steel Welding Wire - .024Inch, 2 lbs.

Hobart Welders Weld-It H305401-R19 is a Solid Carbon Steel Welding Wire. Sound, porosity-free welds with powerful deoxidizers for your work with shielding gases. Great for construction work, farm implement fabrication, shaft buildup, tanks, truck bodies and general shop applications with poor fit-up or rusty, oily plates.

Hobart Welders Weld-It H305408-R19 ER70S-6 Solid Carbon-Steel Welding Wire - .035Inch, 2 lbs.

Hobart Welders Weld-It H305408-R19 is a Solid Welding Wire. Sound, porosity-free welds with powerful deoxidizers for your work with shielding. gases. Great for construction work, farm implement fabrication, shaft buildup, tanks, truck bodies and general shop applications with poor fit-up or rusty, oily plates.

Makita 9557NB Factory Reconditioned 4-1/2 inch Angle Grinder, 11000 RPM, 7.5 Amps

With a powerful 7.5 Amp motor, and 11000 RPM, the Makita 9557 NB Factory reconditioned angle grinder is designed for tough jobsite conditions. It features Makitas exclusive labyrinth construction that twist seals the motor and protects it from contaminates like dust and debris. A small circumference barrel grip provides easy handling and the double insulated motor provides additional safety. The small circuit drum traction has a view to help in increased manoeuvrability of the angle grinder. Energy loss in minimised, as the coil wires are wound close to each other.Use the Makita 9557 NB 4 ½ angle grinder on either AC or DC, and the AC/DC switch is placed right on the top of the tool for convenience. The gear housing rotates 90 degrees to facilitate easy cutting applications in narrow spaces. The face-mounted change ensures easy accessibility. Install the side handle on either side of the tool as per your preferences. You can change the cutting and sanding wheels with ease using the spindle lock.The Makita 9557 NB is ideal for sharpening lawn mower blades, cutting rusty bolts, wire brushing concrete stains, removing burrs and sharp corners on the BBQ & also for metal shelving.

Wilton 17204 Bench Grinder 6-Inch 1/2 Horsepower With Wire Wheel

Wilton 6" Bench Grinder. This unit features a powerful 1/2HP Motor which quickly removes material. Adjustable Tool Rests for controlling the work piece. Adjustable Light for highlighting work piece. Eye Shields for clear viewing of grinding operation, adjustable. Heavy-Duty Metal Base increases durability and stability. Rubber feet for dampening vibration. On/Off Rocker Swith. Grinding wheels included are 6" X 3/4" with 1/2" Arbor. 3450 RPM.

Hobart H222106R22 .030 Flux-Cored Welding Wire ? E71T-11 Carbon-Steel

-Great in single- or multi-pass welds particularly on thin-gauge mild or galvanized steel. -Typically used for light structural, machinery part fabrication, prefab construction, railroad car repair, short assembly welds, tanks and general fabrication.

Hobart Welders Weld-It H383808-R18 ER5356 Aluminum Welding Wire - .035Inch, 1 lb.

ER5356 is a general-purpose type aluminum alloy, which is typically chosen for its relatively high shear strength. In addition, it also offers excellent corrosion resistance when exposed to salt water. ER5356 should be used for welding 5000 series aluminum base metals.