Toolrr - Tool Storage

Carts and Caster Wheels Chest Cabinets Tool Boxes Parts Organizers Tool Belts Tool Bags

Tool Storage tools and information

Find Tool Storage at best prices and buy!

Grip 30290 Leather Belt Working Tool Bag

The Grip 30290 Leather Belt Working Tool Bag is a fine accessory for any handyman, it boasts ballistic nylon construction and is double stitched with reinforced rivets. Along with rip-proof belt loops, it features formed pockets for detached storage and includes nail bags, a hammer holder and tool storage.

Performance W54019 19Inch Organizer Tool Box

The Performance W54019 is a 19 Organizer Tool Box. The heavy-duty tool storage box with its strong double lid latch system and padlock eyehole features a recessed comfort handle, removable center tray, plus two removable organizer trays with adjustable compartments.

Performance W54022 22Inch Organizer Tool Box

The Performance W54022 is a 22" Organizer Tool Box. The heavy-duty tool storage box with its strong double lid latch system and padlock eyehole features a recessed comfort handle, removable center tray, plus two removable organizer trays with adjustable compartments.

Irwin 2051100 9-in-1 Multi-Tool Screwdriver

The Irwin 2051100 is a 9-in-1 Multi-Tool Screwdriver. The ergonomic pro touch grip provides maximum torque and comfort.The internal storage keeps bits and nut setters locked in place and close at hand.

Stack-On® PY23 23in Pro Tool Box

Large sure-grip handle.Extra deep bottom storage area.Extra high lid for increased storage capacity.Bottom feet keep box clean and dry.Deluxe, lift-out tote tray.Fully lockable.

Ernst 5010 11Inch x 16Inch Ten Compartment Tool Tray

Versatile storage for parts and tools Conveniently holds nuts, bolt screws, etc. Great for sockets, vise grips, pliers, etc. Fits tool boxes, shelves and work benches Stackable design 11 x 16 tray with 10 compartments. Red.

Pull'R Holdings 55035 Mullet Buster Tool Belt

-The Mullet Buster has an obscene amount of storage and comes with a bonus set of padded suspenders to help you shoulder the load all day long. Plastic reinforced pouch rims keep the bags wide-open and ready for use.

Mantis® 811005 Tiller Storage Rack

Hang your Mantis® Tiller safely, securely, and out of the way in your garage or shed. Includes seven pegboard hooks for convenient attachment storage. Includes all necessary hardware for easy installation.

Hobart Welders Weld-It 770073 Electrode Storage Can

Hobart Welders Weld-It 770073 is an Electrode Storage Can. It keeps electrodes fresh and dry with an airtight seal. It is features a convenient belt clip and internal dividers with four separate storage areas. Electrodes not included.

Makita BFR750Z 1-3/4 Inch to 2-15/16 Inch 18-Volt LXT Lithium-Ion Cordless Autofeed Screwdriver - Tool Only

The Makita BFR750Z is a 1-3/4 Inch to 2-15/16 Inch 18-Volt LXT Lithium-Ion Cordless Autofeed Screwdriver, Tool Only (battery and charger are NOT included). The BFR750Z has a powerful 4-pole motor that handles decking and sub-floor applications at 4,000 RPM. The integrated autofeed design makes the tool lighter, more powerful and more compact than other brands. It has a high capacity range for collated screws. The rugged aluminum autofeed provides a smooth sliding action while the dust-proof housing ensures longer product life. Screw guide prevents screw strip tangling and folds against the autofeed housing for easy storage. Ergonomic shape fits like a glove with even pressure and easy control.

Stack-on BIN-6, Storage Bin 6 Pack

Molded plastic bins are removable for filling or cleaning, and tilt out 45 degrees for easy accessRugged co-polymer constructionWide front openings for easy access and greater visiblityBins stack together for storage or can nest for transporting or when emptyDimensions 4-1/8W X 5-1/4D X 2-1/8HDoes not include tools

Porter-Cable 77249 Accessory Storage Case for the Omnijig Joinery Systems

The Porter Cable 77249 is an Accessory Storage Case. The Porter Cable 77249 provides a single point of storage for Omnijig Joinery System accessory parts such as Omnijig set-up guides, template positioning stops, depth gauges, router bits, and template guides. The 77249 Accessory Storage Case attaches directly to the back of the Omnijig to provide easy access to accessories and set-up instructions and minimizes storage space required when not in use.

Stack-On® R5192 19Inch Steel, All-Purpose Tool Box

All purpose storage with popular hip roof designRugged all steel end cap construction for greater strength and heavy-duty handlesNickel-plated, steel, lockable draw bolts and full-length, staked piano hinge provide added securityFull-length steel tote tray, slide guide bottom pads prevent scuffing and durable baked epoxy finish resists rust and solventsTools Not IncludedDimensionsOverall 19W x 7D x 7-1/2H

Grip 86450 105-Piece Rotary Tool Accessory Engraving and Grinding Kit

Ideal for cutting, carving, sanding, grinding, cleaning, and polishing For use on all rotary tools that accept 1/8" and 3/32" shanked accessories Includes 3 aluminum oxide grinding stones, 6 silicon carbide grinding stones, 3 nylon brushes (7/8" circular, 9/16" cup, 3/16" end), 3 carbon steel brushes (3/4" circular, 5/8" cup, 3/16" end), 18" x 3/8" high speed steel cutter, 2 high speed steel engraver cutters (3/32", 5/64"), 2 screw mandrels, 10 felt polishing wheels (5 pc 1", 5 pc 1/2"), 5 pc 3/8" felt polishing tips, 24 sanding bands (12 coarse, 12 fine), 2 drum sanders, 10 pc 1-1/4" cut-off wheels, 27 pc 15/16" cut-off discs, dressing stone, 36 pc 3/4" sanding discs, 2 diamond wheel points (cylinderical & spherical), and birch wood storage box

Stack-On DS39 39 Drawer Storage Cabinet

-Contemporary, heavy-duty cabinet design for storing a wide variety of parts and supplies - easily mounts to wall or stands alone-Wide frame and horizontal/vertical supports for strength, rigidity and improved drawer action-Smokie clear, see-through drawers with large, ribbed drawer pulls for easy access to contents - drawer stop tabs prevent spills

Stack-On® DS60 60 Drawer Storage Cabinet

-Contemporary, heavy-duty cabinet design for storing a wide variety of parts and supplies - easily mounts to wall or stands alone-Wide frame and horizontal/vertical supports for strength, rigidity and improved drawer action-Clear, see-through drawers with large, ribbed drawer pulls for easy access to contents - drawer stop tabs prevent spills

DeWalt DW2190 Medium Tough Storage Case

-Spindle Lock -Forward/Reverse -Rubber Grips

Remline SB-18 Yellow 17 Compartment Storage Box with Removable Dividers

-Easy scoop design for convenient access to small parts.-Clear see-through lid allows you to see the contents at a glance.-Cover firmly snaps shut to securely contain contents.-Molded in handle for easy portability.

Ernst 5090 12-Slot Screwdriver Tray

12 slot screwdriver storage tray

Milwaukee 48-32-1700 20-Piece Insert Bit Screwdriving Set

Milwaukees 48-32-1700 20-Piece Insert Bit Screwdriving Set is made of high-grade S2 tool steel for a prolonged tool life. They are contractor-grade bits that are designed for quick-change applications. The 48-32-1700 has a magnetic drive guide with a retracting sleeve to hold long fasteners in place. The sleeve retracts as the screw is driven into the material and works to reduce fastener slipping and wobbling. The Milwaukee 48-32-1700 comes in a compact, rugged case that provides individual storage for bits as well as storage for the drive guide. There are positive stops in the case with bit identification that allow for fast access. The Milwaukee 48-32-1700 case also has a built-in magnet that can be attached to most metal surfaces for quick access and convenient storage.

Performance M614 Manual Air Hose Reel with 30 Foot by 3/8-Inch Hose

The Performance Tool M614 has a 30-Foot by 3/8-Inch rubber air hose250 psi Inlet: 1/4"- 18 NPTEasy storage and handlingHand brake prevents releasing unwanted hose4 mounting holes allow direct mounting to bench top or wall

Milwaukee 48-32-0221 21-Pc Screw Driving Set

The Milwaukee 48-32-0221 is a 21-Pc Screw Driving Set. The bits are engineered and tested to meet the highest of standards. They are designed for heavy-duty use and for a longer tool life. The heavy-duty plastic storage case can hold up to 6 inch long accessories and has enough space to hold a multitude of additional bits and accessories.

Irwin 2078615 Vise Grip 15-Inch Adjustable Wrench

The Irwin 2078615 is a 15 Adjustable Wrench. This Irwin Vise-Grip 15-Inch Wrench has durable chrome vanadium construction and sports both English and metric scales. The wrench has an extra-wide capacity for added versatility, and a hang hole for easy wall storage. The tool meets or exceeds all ANSI standards.

Chicago Pneumatic CP883 Air Hydraulic Riveter

-Vacuum assist system designed for efficiency in downward riveting-Cylinder cap with storage area for spare nose pieces-Universal air inlet swivel to allow more maneuverability-Three piece jaw set-Rubber boot protects tool and work surface-Comes complete with 1/8, 5/32 and 3/16 nose pieces

DeWalt D5136 Ballistic Nylon Trim Carpenter's Pouch

The DeWalt D5136 is a Ballistic Nylon Trim Carpenters Pouch. The tool pouch is designed with features that make getting tools in and out easy. It is made from heavy-duty ballistic nylon so its lightweight, abrasion resistant and moisture resistant. Solid steel rivets, double stitching and reinforced belt tunnel make this one of the toughest trim carpenters pouches available. It includes two large pockets, four additional pockets for dedicated tool storage and a lightweight hammer holder.

Kreg Jig R3 Pocket Hole System

If you’re ready to start your next woodworking or home improvement project, the R3 Kreg Jig® is the tool for you. This jig is loaded with a ton of features that allow you to put projects together more quickly than ever before. Whether you’re looking to build that bookcase for your home office, cabinets for the kitchen, plant stand for the deck, or simple storage shelves for your garage, this is the tool that will allow you to build like a professional.

DeWalt D5128 Ballistic Nylon Pliers / Tin Snip Pouch

The DeWalt D5128 is a Ballistic Nylon Pliers / Tin Snip Pouch. The tool pouch is designed with features that make getting tools in and out easy. It is made from heavy-duty ballistic nylon so its lightweight, abrasion resistant and moisture resistant. Solid steel rivets, double stitching and reinforced belt tunnel makes it one of the toughest pliers / tin snip pouches available. The single tool storage makes this perfect for retention of a variety of pliers or miscellaneous tools.

Jobox 1-655990 Steel Chest 60-Inch L X 24-Inch W X 27-3/4 Inch H

The Jobox 1-655990 is a Heavily-reinforced 16-Gauge Steel Construction tool storage chest. This 60-Inch long chest provides 19.3 cubic feet of usable storage space. A one-piece 7-gauge reinforced bolster on both ends reinforces the bottom of the chest to prevent damage if dropped. These bolsters are pre-tapped for installing optional heavy-duty casters. Lock not included.

Jobox 1-654990 Steel Chest 48-Inch L X 24-Inch W X 27-3/4 Inch H

The Jobox 1-654990 is a Heavily-reinforced 16-Gauge Steel Construction tool storage chest. This 48-Inch long chest provides 15.4 cubic feet of usable storage space. A one-piece 7-gauge reinforced bolster on both ends reinforces the bottom of the chest to prevent damage if dropped. These bolsters are pre-tapped for installing optional heavy-duty casters. Lock not included.

Jobox 1-680990 Slope Lid Box, 60-Inch L X 30-Inch W X 39-1/2 Inch H

The Jobox 1-680990 is a Heavy-Reinforced 16 Gauge Steel Construction Tool Storage Chest with a Sloped Lid. The Jobox Slope Lid Box offers versatile fold-away props that support the lid and form a large flat working surface at ideal working height. Flexible storage is provided by Tilt-N-Stow? hinged shelves, which support up to 500 lbs. when lowered. These shelves tilt up to gain nearly 12" of interior depth to stow wider and taller items.

Jobox 1-656990 Steel Chest 48-Inch L X 30-Inch W X 33-1/24 Inch H

The Jobox 1-656990 is a Heavily-reinforced 16-Gauge Steel Construction tool storage chest. This 48-Inch long chest provides 24.3 cubic feet of usable storage space. A one-piece 7-gauge reinforced bolster on both ends reinforces the bottom of the chest to prevent damage if dropped. These bolsters are pre-tapped for installing optional heavy-duty casters. Lock not included.

Performance 13-Piece Drill Bit Set

Assorted sizes 1/16 through 1/4 Handy storage case

Pull'R Holdings 06053 Extreme Hopalong Gatemouth

-The Hopalong gatemouth tool bag is the no-holds-barred carrier youll want on the jobsite. Bucket Boss Extreme represents a major innovation developed by contractors who demand the best quality available in tool carriers. High-density ballistic nylon (1680 Denier) is the foundation for this Extreme product. Heavy-duty nylon and polyester fabric provide extra strength, and PVC reinforcement gives large pockets and major stress points additional strength and durability. PVC on the bottom protects against moisture. A zippered Junk Drawer offers extra moisture-resistant storage, and the cell phone pocket is ideal for the always-in-touch professional.

Festool 491986 12 Drawer Sortainer

ToolKing.com promotional discount codes or coupons are NOT valid on Festool productsThe Festool 491986 12 drawer Sortainer keeps small parts sorted and organized. The handy drawer set latch onto Systainers and CT dust extractors. It is extremely useful when a tool Systainer is latched to the top of a Sortainer to have a self-contained carrying case complete with a tool and its consumables and accessories. The user can latch two or more sortainers together for a complete small-parts storage unit that he can break down and reconfigure as needed. Latch a Sortainer and Systainer to a CT dust extractor for a rolling work unit ? especially useful when working at a customers site.

Festool 491522 4 Drawer Sortainer

ToolKing.com promotional discount codes or coupons are NOT valid on Festool productsThe Festool 491522 4 drawer Sortainer keeps small parts sorted and organized. The handy drawer set latch onto Systainers and CT dust extractors. It is extremely useful when a tool Systainer is latched to the top of a Sortainer to have a self-contained carrying case complete with a tool and its consumables and accessories. The user can latch two or more sortainers together for a complete small-parts storage unit that he can break down and reconfigure as needed. Latch a Sortainer and Systainer to a CT dust extractor for a rolling work unit ? especially useful when working at a customers site.

Milwaukee 5540 7Inch/9Inch Polisher

Milwaukee Polishers are built with a powerful 11 amp motor that provides plenty of power to maintain the right speed. A trigger speed control switch allows speeds of 0-2800 rpm. This versatile model will accept 7 inch or 9 inch accessories. A spindle lock for convenient, quick accessory changes is standard. A Quik-Lock cord set allows quick detachment of the cord from the tool for tangle free carrying and storage. Built for a long life this tool includes helical gearing, all ball and roller bearings and an aluminum gear case with protective urethane bumpers.

Festool 491984 6 Drawer Sortainer

ToolKing.com promotional discount codes or coupons are NOT valid on Festool productsThe Festool 491984 6 drawer Sortainer keeps small parts sorted and organized. The handy drawer set latch onto Systainers and CT dust extractors. It is extremely useful when a tool Systainer is latched to the top of a Sortainer to have a self-contained carrying case complete with a tool and its consumables and accessories. The user can latch two or more sortainers together for a complete small-parts storage unit that he can break down and reconfigure as needed. Latch a Sortainer and Systainer to a CT dust extractor for a rolling work unit ? especially useful when working at a customers site.

Festool 491985 9 Drawer Sortainer

ToolKing.com promotional discount codes or coupons are NOT valid on Festool productsThe Festool 491985 9 drawer Sortainer keeps small parts sorted and organized. The handy drawer set latch onto Systainers and CT dust extractors. It is extremely useful when a tool Systainer is latched to the top of a Sortainer to have a self-contained carrying case complete with a tool and its consumables and accessories. The user can latch two or more sortainers together for a complete small-parts storage unit that he can break down and reconfigure as needed. Latch a Sortainer and Systainer to a CT dust extractor for a rolling work unit ? especially useful when working at a customers site.

Porter-Cable NS150B 18 Gauge 1-1/2 Inch Narrow Crown Stapler Kit

The Porter-Cable NS150B is a 18 Gauge 1-1/2 Inch Narrow Crown Stapler Kit. Featuring a long life maintenance/oil-free motor that prevents oil from staining the work surface, an internal piston catch for consistent max power on every shot, and a rear exhaust that keep contaminates away from work, the NS150B is part of the newest generation of Porter Cable staplers. With the ability to drive 18 gauge staples with 1/4-Inch crown from 1/2-Inch to 1-1/2 Inches in length, a tool-free depth-of-drive adjustment with detents for proper setting of nail heads, tool-free jam release mechanism for easy nail removal, a sequential style trigger with lock off switch and a removable non-marring nose tip with on tool storage, the NS150B meets all of the requirements that the discerning end user demands.

Porter-Cable DA250C 15 Gauge 2-1/2 Inch Angle Finish Nailer

The Porter-Cable DA250C is a 15 Gauge 2-1/2 Inch Angle Finish Nailer. Featuring a long life maintenance/oil-free motor that prevents oil from staining the work surface, an internal piston catch for consistent max power on every shot, and a rear exhaust that keep contaminates away from work, the DA250C is part of the newest generation of Porter Cable finish nailers. With the ability to drive 15 gauge nails from 1" to 2 1/2" in length, a tool-free depth-of-drive adjustment with detents for proper setting of nail heads, tool-free jam release mechanism for easy nail removal, a sequential style trigger with lock off switch and a removable non-marring nose tip with on tool storage, the DA250C meets all of the requirements that the discerning end user demands.

Festool 583360 CT Mini Mobile Dust Extractor

ToolKing.com promotional discount codes or coupons are NOT valid on Festool products The Festool 583360 is a CT Mini Mobile Dust Extractor. It features low weight and small size, so user can work clean anywhere, to save cleanup time and extend the life of tools and consumables. It has tool-triggered or manual start and the locking brake prevents accidental movement. Its quiet running for a more pleasant working environment and has on-board extra bag storage for fast replacement.

Hyde 04700 4-1/2Inch Flexible Red Star 4000 Joint Knife

-Ergonomically designed and tested one piece handle-Rugged, red polypropylene handle resists most common paint thinners-High carbon steel blade-Each blade tempered, ground and satin finished-Blades and handles are securely joined with three zinc plated steel grommets-Handles feature a large loop to hang tool for storage