Drill Bits Router Bits Sandpaper Saw Blades
Tool Accessories tools and information
Find Tool Accessories at best prices and buy!
Eclipse 900-106 Deluxe Tool Bag
Eclipse 900-106 is a Deluxe Tool Bag for carrying Tools and Accessories.
Eclipse MTB-1 Mechanic's Tool Bag
Eclipse MTB-1 is a Tool Bag to store small tools and accessories specially designed for a mechanic.
Makita 3706K Drywall Cut Out Tool Kit with Accessories and Case, 32000 RPM, 5 Amps
The Makita 3706K Drywall Cut Out Tool has a powerful 5 Amp motor which delivers 32000 RPM for fast cutting in a wide variety of material. It accepts both 1/8 inch and 1/4 inch bits. It has a slim body design for optimum comfort and precise control. Lightweight at only 2.4 lbs for easy handling , 2-way Slide and Bump on/off switch. It has a sealed switch for extra protection from dust and debris and a longer tool life. Tool-less depth adjustment sets the desired cutting depth quickly and easily. All ball bearings construction reduces friction and creates smooth rotation. Large and conveniently located shaft lock button for fast bit changes. It has technologically advanced centrifugal for the most efficient cooling of the motor. The fan exhaust vents direct air and debris away from the operator. Durable 10 cord with cord guard. Convenient storage of wrench on the cord.
DeWalt BAG2PC Empty 2-Bag Tool
The DeWalt BAG2PC is an Empty 2-Bag Tool. The empty tool bag is for cordless tools. It easily holds 2 power tools plus accessories. It has heavy-duty ballistic nylon for long life. The bag features reinforced bottom and side panels, double stitching and steel rivets for maximum durability and heavy-duty handles for allowing heavy loads.
Pull?R Holding 54016 Bucket Boss Nail and Tool Pouch with Belt
The PullR Holding 54016 is a Bucket Boss Nail and Tool Pouch with Belt. This tool pouch has plenty of pockets and pouches for all the tools and accessories you will need to get the job done.
Alltrade 648629 Serpentine Belt Tool
For removing and installing serpentine belts on vehicles with spring-loaded belt tensioners. Includes accessories for specific vehicle applications, including GM, Ford, Chrysler, SAAB, VW and Volvo. Carry case includes usage photos and instructions.
DeWalt BAG6PC Empty Tool Bag for 18 Volt Tools
The DeWalt BAG6PC is an Empty Tool Bag for 18V Tools. The empty tool bag from DC6KITA 6-tool cordless combo kit easily holds 6 power tools plus accessories. It has heavy-duty ballistic nylon for long life. It features reinforced bottom and side panels. Double stitching and steel rivets for maximum durability Heavy-Duty handles allow heavy loads.
DeWalt D6050 17 inch Ballistic Nylon Tool Bag
The DeWalt D6050 is a rugged 17 tool bag made from ballistic nylon, which makes it lightweight. Apart from the ballistic nylon construction that is moisture and abrasion resistant, this tool bag also has reinforced bottom and side panels to protect its contents. Double stitched high stress areas and reinforced solid steel rivets ensure a longer life for the tool bag. The DeWalt D6050 also has protective rails with heavy-duty handles for additional durability. The flat top allows you to stack other bags or accessories and thus, save space. The tool bag is large enough to store a couple of power tools or combo kits, along with wrenches, extension cord, and other accessories that can easily fit into the outer and inner compartments. Moreover, the compact size (8.5x17x11) and the well-organized pockets (11 large pockets) of the DeWalt 6050 make it easy to just pick up the tool bag and head out to jobsites with all your essential tools.
DeWalt DW056 Impact Wrench - Tool Only with Case
The DW056 is an 18-Volt Impact Wrench with Case, Tool Only (battery and charger are NOT included). This impact wrench delivers more torque, faster speed and greater control in a package smaller than cordless drills. Delivering 1,170 in-lbs of maximum torque, 0-2,400 rpm and 0-3,000 bpm, the DW056 has the power to drive large lag screws into pressure treated lumber, the speed to quickly drive self-tapping screws into sheet metal and the control to fasten large nuts and bolts. Measuring only 6-1/2 Incheslong, the DW056 gets you into tighter spots to get the job done. The heavy-duty impact mechanism provides the power to drive large fasteners while delivering less kickback. Meeting the demands of the job site or the shop, the DW056 features a heavy-duty magnesium gear case and durable all-metal transmission. The textured anti-slip comfort grip and wrap-around rubber molding provide extended control and comfort. Equipped with an all-metal 1/4-Inch hex quick release chuck, the DW056 accepts all 1/4-Inch hex accessories to provide the versatility to drive, drill or fasten in a variety of materials.
Fastcap 3-H CONTRACT PK 4 Third Hands, 4 Universal Foot, Accessories & Nylon Bag
The Fastcap 3-H CONTRACT PK is a pack of 4 Third Hands, 4 Universal Feet, Accessories & a Nylon Bag.
DeWalt DW828R Factory Reconditioned DW828 6-Inch Cut-Off Tool with Paddle Switch
DeWalt DW828 Factory Reconditioned Cut-Off Tool is Powered by a 9.0 Amp, 9,000 rpm motor. The DW828 is the industry's first 6 cut-off tool with a non lock-on paddle switch. The DW828 provides best-in-class durability through its dust-sealed switch, automatic turn-off brushes, and spiral bevel cut steel gear. For enhanced ergonomics, the DW828 includes a keyless adjustable Type 1 guard, a low-profile, air-cooled gear case that allows the tool to get into tighter spaces, anti-lockup flanges that allow you to change accessories without the need for a wrench, a protected side-positioned spindle lock for easier wheel changes, and a vibration-reducing rubber grip side handle. Includes wrench, anti-lockup flanges, keyless adjustable guard, side handle.
Grip 86450 105-Piece Rotary Tool Accessory Engraving and Grinding Kit
Ideal for cutting, carving, sanding, grinding, cleaning, and polishing For use on all rotary tools that accept 1/8" and 3/32" shanked accessories Includes 3 aluminum oxide grinding stones, 6 silicon carbide grinding stones, 3 nylon brushes (7/8" circular, 9/16" cup, 3/16" end), 3 carbon steel brushes (3/4" circular, 5/8" cup, 3/16" end), 18" x 3/8" high speed steel cutter, 2 high speed steel engraver cutters (3/32", 5/64"), 2 screw mandrels, 10 felt polishing wheels (5 pc 1", 5 pc 1/2"), 5 pc 3/8" felt polishing tips, 24 sanding bands (12 coarse, 12 fine), 2 drum sanders, 10 pc 1-1/4" cut-off wheels, 27 pc 15/16" cut-off discs, dressing stone, 36 pc 3/4" sanding discs, 2 diamond wheel points (cylinderical & spherical), and birch wood storage box
Fein 3-39-01-118-17-0 FMM Accessory Set with Plastic Case
Upgrade your Fein MultiMaster FMM tool with this accessory set that includes all accessories sold with the FMM Multimaster Top package, as well as a plastic storage case.
DeWalt DC9PAKIAR Factory Reconditioned DC9PAKIA XRP 18-Volt 9 Piece Combo Kit with Impact
The DeWalt DC9PAKIA is a Factory Reconditioned XRP 18-Volt 9 Piece Combo Kit which ncludes a hammerdrill, circular saw, recip saw, impact driver, cut-off tool, flexible floodlight, variable speed jig saw, impact wrench and cut-out tool along with several of the accessories to go with each tool and two contractors bag. This combo kit is an excellent value and covers a large range of tool needs.
Milwaukee 48-32-0221 21-Pc Screw Driving Set
The Milwaukee 48-32-0221 is a 21-Pc Screw Driving Set. The bits are engineered and tested to meet the highest of standards. They are designed for heavy-duty use and for a longer tool life. The heavy-duty plastic storage case can hold up to 6 inch long accessories and has enough space to hold a multitude of additional bits and accessories.
Milwaukee 48-11-2401 12-Volt Battery
The Milwaukee 48-11-2401 is a 12-Volt Battery. This 12-Volt Lithium-Ion cordless tool battery delivers longer life and run-time with fade-free power. This battery features an ergonomic, compact, and lightweight design for operator comfort. For Use with Milwaukee 12V Tools and Accessories.
DeWalt DW056K-2 18V Heavy-Duty Cordless Impact Driver Kit, 0-2400 RPM
The DeWalt DW056K-2 is an 18 Volt Heavy-Duty Cordless Impact Driver Kit. This timesaving tool is a cross between a cordless drill/driver and an impact wrench. It combines high-speed rotation (2,400 rpm) with jackhammer-like percussion (3,000 beats per minute) to drive and remove screws faster and easier that any other tool. The DW056K-2 is powered by an 18-volt nickel-cadmium (Ni-Cad) battery that produces an impressive 1,170 inch-pounds of screw-twisting torque. It has a reversing, variable-speed motor, and a specially designed impacting mechanism that helps eliminate annoying kickbacks. The tool is equipped with an all-metal 1/4-inch quick-release chuck that accepts all 1/4-inch hex-shank accessories.
Festool 491522 4 Drawer Sortainer
ToolKing.com promotional discount codes or coupons are NOT valid on Festool productsThe Festool 491522 4 drawer Sortainer keeps small parts sorted and organized. The handy drawer set latch onto Systainers and CT dust extractors. It is extremely useful when a tool Systainer is latched to the top of a Sortainer to have a self-contained carrying case complete with a tool and its consumables and accessories. The user can latch two or more sortainers together for a complete small-parts storage unit that he can break down and reconfigure as needed. Latch a Sortainer and Systainer to a CT dust extractor for a rolling work unit ? especially useful when working at a customers site.
Festool 491984 6 Drawer Sortainer
ToolKing.com promotional discount codes or coupons are NOT valid on Festool productsThe Festool 491984 6 drawer Sortainer keeps small parts sorted and organized. The handy drawer set latch onto Systainers and CT dust extractors. It is extremely useful when a tool Systainer is latched to the top of a Sortainer to have a self-contained carrying case complete with a tool and its consumables and accessories. The user can latch two or more sortainers together for a complete small-parts storage unit that he can break down and reconfigure as needed. Latch a Sortainer and Systainer to a CT dust extractor for a rolling work unit ? especially useful when working at a customers site.
Festool 491986 12 Drawer Sortainer
ToolKing.com promotional discount codes or coupons are NOT valid on Festool productsThe Festool 491986 12 drawer Sortainer keeps small parts sorted and organized. The handy drawer set latch onto Systainers and CT dust extractors. It is extremely useful when a tool Systainer is latched to the top of a Sortainer to have a self-contained carrying case complete with a tool and its consumables and accessories. The user can latch two or more sortainers together for a complete small-parts storage unit that he can break down and reconfigure as needed. Latch a Sortainer and Systainer to a CT dust extractor for a rolling work unit ? especially useful when working at a customers site.
Festool 491985 9 Drawer Sortainer
ToolKing.com promotional discount codes or coupons are NOT valid on Festool productsThe Festool 491985 9 drawer Sortainer keeps small parts sorted and organized. The handy drawer set latch onto Systainers and CT dust extractors. It is extremely useful when a tool Systainer is latched to the top of a Sortainer to have a self-contained carrying case complete with a tool and its consumables and accessories. The user can latch two or more sortainers together for a complete small-parts storage unit that he can break down and reconfigure as needed. Latch a Sortainer and Systainer to a CT dust extractor for a rolling work unit ? especially useful when working at a customers site.
Milwaukee 9071-20 1/2Inch Impact Wrench with Friction Ring Socket Retention, 7.0 Amps, 2600 BPM
The Milwaukee 9071-20 1/2 Impact Wrench delivers 300 ft-lbs of torque and weighs only 6 lbs. The tool has a great power to weight ratio. The powerful 7.0 Amp motor drives a unique impact mechanism at 1800 RPM (no load). The model features a friction ring (hog ring) socket retention system for applications involving frequent changing of accessories, and a rocker switch for quick selection of forward or reverse. The ergonomically shaped handle with a soft cushioned grip provides a well-balanced and controllable feel to the tool. The special mechanism achieves desired installation torque faster and loosens rusted or fretted bolts in less time.
Jet 708015 / JSSG-10:JT Slow Speed Wet Sharpener
The Jet 708015 / JSSG-10JT is a Slow Speed Wet Sharpener. This wet sharpener offers woodworkers advanced sharpening features like torque adjustment for consistent pressure to the drive shaft, variable dial speed control that maintains outer wheel speed regardless of sharpening stone diameter and an oversized reservoir for better water management. This Jet slow speed wet sharpener is also equipped with a tool storage tray and an assortment of eight accessories that are sure to be our most popular.
Makita 3621 1-1/4 HP Plunge Router, 24000 RPM, 7.8 Amps
The Makita 3621 is a 1-1/4 HP Plunge Router. Its contoured handle design with built in switch means more precise routing. The router features a 0 - 1-3/8 inch plunge depth capacity with presetting of 3 plunge depths. A rugged polycarbonate housing and nonmarring base means stability and a scratch-free workpiece. Uses standard 1/4 inch shank router bits. The Makita 3621 is double insulated and comes complete with a plastic tool case for convenient storage of tools and accessories.
DeWalt D28402 4 1/2 Inch Small Angle Grinder, 110000 RPM, 10.0 Amps
The D28402 grinder features a powerful 10 amp, AC/DC, 11,000-rpm motor for fast material removal and overload protection. The Dust Ejection System gets rid of dust particles that enter the tool through the air intake vents and extends the life of the tool by preventing build-up of dust particles on internal moving parts. A Jam-pot, low profile gear case provides precise gear alignment for a smoother, quieter transmission while allowing access to tight spaces. The one-piece brush arm prevents brush hang-up due to dust ingress. The Quick-Change wheel release provides easier and quicker wheel removal without the need for a wrench. A Keyless adjustable guard provides tool free guard adjustment thus increasing productivity. The removable side handle reduces the vibration you feel during operation. When brushes need replacing, the grinder automatically shuts off to reduce tool damage. An over sized, protected spindle lock button provides easier and quicker wheel changes. The paddle-switch lock-off protects the user from accidental startup. Matching wheel flanges allow the use of common accessories.
Fein 3-06-05-114-01-1 Super Cut Adaptor
The Fein 3-06-05-114-01-1 is a Super Cut Adaptor. The adapter is needed for fitting accessories with round adapters for rasping sanding and tools.
Fein Multimaster Flooring Kit - 6-39-03-167-41-1
-A complete set of accessories for the Fein MultiMaster range of tools chosen for their use in a wide range of flooring applications.
Fein 6-39-03-167-40-2 Wood Kit
-A complete set of accessories for the Fein MultiMaster range of tools chosen for their use in a wide range of wood applications.
Delta 49-220 2-1/2 Inch to 1-1/2 Inch Dust Reducer
The Delta 49-220 is a Dust Reducer. The reducer is for hook-up of accessories and attachments with 2-1/2 inch or 1-1/2 inch diameter connector.
Milwaukee 48-11-1967 12V 1.3 Amp-Hour Battery Pack
12V, 1.3 Amp-Hour battery pack-For use with Milwaukee 12V cordless tools and accessories
Makita 2704X1 10 inch Table Saw, 15 Amps, 4800 RPM
Makita 2704X1 is a high performance table saw features an extension table to enable better cutting and the ease of ripping a 4x8 sheet of plywood. This table saw is compatible with up to a 13/16 dado blade. The rugged 15 Amp motor generates 4,800 RPM, which can deliver a large cutting capacity of 3-5/8 at 90 and 2-1/2 at 45. Besides, the Makita 2704X1 is integrated with 3/8 x 3/4 T-slot miter gauge grooves that accept commercial accessories. To enhance the productivity of this power tool, it is installed with dead-on cam-locking rip fence and bevel locking handle. Moreover, you can adjust the blade depth with two pole slide system. Keeping in mind the traveling trouble, Makita 2704X1 has an enclosed saw blade underneath the table. Besides, the table saw also has features such as large switches, easy to read scale, electric brake, and storage capacity for commonly used accessories.
DeWalt DC668KA 18V Heavy-Duty Light Gauge Steel Framing Screwdriver, 0-900 RPM & 0-2700 RPM, 180 in-lbs
The DeWalt DC668KA is an 18V Heavy-Duty Light Gauge Steel Framing Screwdriver. The DeWalt screwdriver is designed for a variety of steel stud framing applications. The registered Versa-Clutch torque adjustment dial allows to set the tool to a specific torque and prevents the stripping of fasteners. The heavy-duty screwdriver is also equipped with dual speeds running either 0-900 RPM or 0-2700 RPM which allows optimal performance using variety of fasteners. It uses a 1/4 inch hex drive which accommodates all fastening accessories including screw driving bits and nut runners.
Shop-Vac 962-39-10 16 Gallon 2.5 HP Poly Industrial Multi Purpose Wet/Dry Vacuum Cleaner
The Shop-Vac 962-39-10 is a 16 Gallon Industrial Multi Purpose Wet/Dry Vacuum Cleaner. Boasting a powerful 2.5 peak HP motor with 100 CFM and 90-Inches of sealed pressure, the 962-39-10 Industrial Multi Purpose vacuum cleaner offers superior suction. Extra-large casters make moving this vacuum cleaner a breeze, while the patented lock-on positive connection hose system ensures complete pickup of dirt and debris, as well as a secure fit. The on-board tool basket and caddy brings the vacuum accessories at your fingertips, and the tank drain allows for effortless emptying. Best of all, the Shop-Vac 962-39-10 Industrial Multi Purpose is extra-quiet and comes with a comprehensive 1-year warranty.
DeWalt D28110 Heavy-Duty 4-1/2Inch Small Angle Grinder, 11000 RPM, 7.0 Amps
7.0 Amp AC/DC, 11000 RPM motor designed for faster material removal and higher overload protectionQuick-Change wheel release provides easier and quicker wheel removal without the need for a wrenchLow profile jam-pot gear case increases durability and allows tool to fit into tight spacesOversized, protected spindle lock button provides easier and quicker wheel changes2 position removable side handle provides increased comfort and controlSlim, ergonomic body design provides increased comfort in extended use applications5/8-11 spindle thread accepts a wide range of 4-1/2 accessories
Fein 3-39-01-118-03-0 Plastic Case
-Fein 3-39-01-118-03-0 Plastic Case-Sturdy Plastic Case with foam inserts, to store all extra accessories for the MSXE 636-2XL MultiMate Variable Speed XL
DeWalt DW2582 Heavy-Duty 50-Pc MAC Container Accessory Set
The DeWalt DW2582 is a Heavy-Duty 50-Pc MAC Container Accessory Set. The MAC Container offers a durable storage solution for a variety of accessories.
Fein 6-39-01-025-06-0 MultiMaster Mini E-Cut Set with Diamond Sharpening Blade
The Fein 6-39-01-025-06-0 MultiMaster Mini E-Cut Kit with Diamond Sharpening Blade is perfect for those small detailed cutting tasks. No hobby workshop would be complete without these accessories. Perfect for adding extra accessories in your car or boat dashboard. Use the Diamond Sharpening Blade to hone razor sharp edges on knives and garden tools along with your Multimaster accessories. With the Mini E-Cut Blades you can get into even tighter spots than the regular E-Cut blades.
Milwaukee 49-22-8510 Right Angle Drill Attachment
-Ideal for cordless 2.4 volt - 18 volt drills for portability and weight -1/4 Magnetic hex drive socket works with a wide array of bits and accessories from most manufacturers -Compact size makes maneuvering easy and storage even easier by fitting into tool pouches, boxes or pockets -Durable and built to last with an all-metal housing, steel gears and ball bearing construction -Drives screws up to #8 x 3 in size -Fits all chucks that are 1/4 or larger -Quick change chuck ensures bits stay in and that changing them is a simple job -The side handle can sit in positions between 0 and 90 degrees to be there when you need it and be out of the way when you are in tight spaces
Flex 289957 Velcro Backing Pad with 5/8Inch Adapter
The Flex 289957 is a Velcro Backing Pad with 5/8 Adapter. It is soft and springy for uniform pressure distribution. The universal applications of the pad are for holding polishing accessories, with centering hole and centering tube. It has 5/8 adapter.
Big Horn 11133 Shop Vac Fitting
-2-1/4 inches wide on one end to work with your shop vac accessories and 2-1/2 inches on the other to be able to thread onto a 2-1/2 inch dust hose for your dust system.
Milwaukee 48-03-0006 1/2Inch Quick Change Chuck
The Milwaukee 48-03-0006 is a 1/2 Quick Change Chuck. It can convert 3 jaw chuck into a 7/16 quick change chuck. It has 1/2 shank. This chuck allows rapid, keyless insertion and removal of 7/16 hex drive accessories.
Milwaukee 48-11-1014 14.4V 1.7 Amp-Hour Battery Pack
-14.4V, 1.7 Amp-Hour battery pack for use with Milwaukee 14.4V cordless power tools and accessories-Reversible battery feature allows to work in tight spaces or shift the weight for better balance when working overhead
Chicago Pneumatic CP871 High Speed Tire Buffer, 13 CFM, 22000 RPM
-Built-in regulator-Jacobs chuck for holding buffing accessories-Lock off throttle to prevent accidental start ups-Rear exhaust directs air away from the work area
DeWalt D28402K Heavy-Duty 4-1/2Inch Small Angle Grinder with Paddle Kit, 11000 RPM, 10.0 Amps
The DeWalt D28402K is a 4-1/2 angle grinder kit with an angle grinder that has an output of 11,000 rpm for toughest application such as finishing, welding, deburring, grooving, and cutting tiles in different shapes. The powerful 10.0Amp AC/DC motor of the DeWalt D28402K angle grinder does not slow down while grinding, or overheat. The unique Dust Ejection System protects the internal machine from getting affected by the dust particles that might enter the tool from air intake vents. Additionally, the single piece brush arm ensures that the brush does not hang-up even if dust enters. The jam-pot, low profile gear case ensures easy maneuverability of the angle grinder even in tight spaces.The DeWalt D28402K has a facility to quickly release the wheel and change it without using a wrench. The oversized, protected spindle lock button also aids easy replacing of the wheel. The cutting disk or grinding disk can be quickly changed using the threaded washer, which does not require any backing ring or spacer for clamping and centering. When the brushes need a replacement, the auto-off brushes stop the working of the tool.The matching wheel flanges feature of the DeWalt D28402K, make it compatible with most accessories. The simple screw in/screw out handle coated with vibration reducing material can be fixed on either side of the angle grinder and is large sized for better grip. The user is protected from accidental start up with the paddle switch and in case the user drops the tool, it will automatically be switched off (provided trigger lock is off). The productivity of the tool is increased with the keyless adjustable guard. Besides the grinder, the DeWalt D28402K angle grinder kit also includes a depressed center wheel, wrench, and a kit box.
Ingersoll-Rand IR 307A 1/4Inch Mini Die Grinder
Ingersoll-Rand IR307A is a Standard Duty Mini Air Die Grinder. It is an expanded line of economical, standard duty grinders, the 307A combines performance and versatility in a lightweight, compact package. It can be used with all types of accessories for porting, weld breaking, and smoothing sharp edges, deburring, polishing, and grinding.
Kapro 406-20 60' Water Level Set
60 water level set precisely copies heights from one distance point to another with printed lines for better measuring perpective.It includes user friendly accessories for application - funnel, end caps, O-rings and water coloring.Printed lines for better measuring perpestive
Hobart Welders 194776 Welding Cart (Small) With Cylinder Rack for 500414 MIG Welder
-Designed for use with #500414 (Handler 135 MIG welder), can also be used with most portable wire-feed welders-Heavy duty construction-Storage tray for cables and accessories-Accepts gas bottles up to 7 diameter and 75 lbs
Fein 30109189010 4-Star Adapter
Use this adapter to take advantage of the benefits of the new accessory mount system with an old-style MultiMaster holder. The bottom side has 4-star male mount that fits securely into the newly designed accessories, the top side is carbide coated to prevent slipping in the old-style MultiMaster mount.
Safety Speed Cut BRONZE Bronze Accessory Package
Safety Speed Cut BRONZE is an Accessory Package that allows you to customize your machine to best suit your operation at a reduced cost. Accessories can dramatically expand the efficiency and versatility of your panel saw. The Bronze Accessory Package includes: Wheels, a Fixed Stand, a 5Quick Stop and a Saw Blade.
Milwaukee 48-55-3510 Contractor Bag
Milwaukee 48-55-3510 is a Contractor Bag. The soft side contractor bag is made of tough water resistant 600 denier material. It provides extra storage for job site tools and accessories. It has shoulder strap and dual handle straps for easy carrying.
Couldn't find Tool Accessorieshere? Are you looking for something else? Search our partner sites: