Stabila Level Tools tools and information

Find Stabila Level Tools at best prices and buy!

Stabila 30035 Plate Level Case

Stabila 30035 Plate Level Case holds Stabila plate levels for storage and easy mobility.

Stabila 30196 96-Inch Hard-Shell Level Case

The Stabila 30196 is a 96-Inch Hard Level Case. The Stabila has a strong, padded liner to protect the level in transit. It also has tough high-strength nylon outer shell. The Stabila 30196 has a convenient shoulder strap for easy carrying and a convenient loop for hanging on pegs and hooks.

Stabila 30178 78-Inch Hard-Shell Level Case

The Stabila 30178 is a 78-Inch Hard Level Case. The Stabila has a strong, padded liner to protect the level in transit. It also has tough high-strength nylon outer shell. The Stabila 30178 has a convenient shoulder strap for easy carrying and a convenient loop for hanging on pegs and hooks.

Stabila 30159 59-Inch Hard-Shell Level Case

The Stabila 30159 is a 59-Inch Hard Level Case. The 30159 has a strong, padded liner to protect the level in transit. It also has tough high-strength nylon outer shell for durability. The Stabila 30159 has a convenient shoulder strap for easy carrying and a convenient loop for hanging on pegs and hooks.

Stabila 37978 78Inch Electronic Level

-Stabilas new 78 TECH level offers both a Stabila spirit level with patented vial system that are guaranteed accurate for life, and a dual display electronic level. The two digital displays are located on the top edge and the front face for easier and faster reads. The frame is 30% stronger than our previous electronic level and all four corners have been retained on the new frame. High accuracy electronic module 0.05 degrees (1/16 over 72) and offers fast and easy one-button calibration. Electronic module reads in degrees, percentage or inches per foot so you can set slope and pitch. Audible tone on any selected degree for duplicating angles quickly without having to read the screen. Great for concrete contractors installing handicap ramps or any sidewalk or slab that needs specific angle or slope. Inspectors use electronic levels to check contractors work. Trim carpenters use electronic levels to determine angles on stairs to build railings. Framing carpenters use electronic levels to check pitches on existing roofs and duplicate pitches on common rafters, difficult rafters or valleys and crickets. All professional contractors appreciate the speed of the Stabila TECH level to increase productivity and accuracy.

Stabila 05000 Self-Leveling Rotary Laser Level

The Stabila 05000 General Purpose Self Leveling Rotating Laser Level is fast to set-up, easy to use, and simple to carry. 250 ft. operating radius with detector. Shoots horizontal, vertical, square and plumb. Jobsite vibration stabilization system. 4-1/2 built-in tripod height adjustment range. Out of level alert. The Stabila 05000 Laser can be re-positioned 360 for picking out layout lines without changing point of ref.

Stabila 29248 80A-2M 48in General Purpose Level

Stabila 29248 80A-2M 48in General Purpose Level has a new look. The redesigned 80A-2M contractors level has a contoured box beam frame. Solid acrylic vials with spring steel hairline indicators inside vials for accurate reading.

Stabila 29224 80A-2M 24in General Purpose Level

Stabila 29224 80A-2M 24in General Purpose Level has a new look. The redesigned 80A-2M contractors level has a contoured box beam frame. Solid acrylic vials with spring steel hairline indicators inside vials for accurate reading.

Stabila 11990 Pocket Level

Lightweight, Compact DesignMagneticPermanently calibrated vialsAccuracy guaranteed for lifeMade in GermanyVial accuracy guaranteed for lifeDamaged body voids the warranty

Stabila 37448 48-Inch Box Frame Level

The Stabila 37448 48-Inch Box Frame Level is one of the best professional levels. Rubber pad end caps and wall grips that are functional yet removable for flush measuring. This level has a wider profile which means an even stronger frame. The accuracy is certified, top and bottom readings and sports a new rubber hand grip design.

Stabila 37424 24Inch Box Frame Level

Stabila 37424 24 Box Frame Level is one of the best professional levels. Rubber pad end caps and wall grips that are functional yet removable for flush measuring. This level has a wider profile which means an even stronger frame. The accuracy is certified, top and bottom readings and sports a new rubber hand grip design.

Stabila 37478 78-Inch Box Frame Level

The Stabila 37478 78-Inch Box Frame Level is one of the best professional levels. Rubber pad end caps and wall grips that are functional yet removable for flush measuring. This level has a wider profile which means an even stronger frame. The accuracy is certified, top and bottom readings and sports a new rubber hand grip design.

Stabila 32610 Magnetic Plate Level 6-10ft

Stabila 32610 Magnetic Plate extends from 6 to 10 feet and is designed for the residential framer or any contractor that needs fast and accurate wall installations (plumb plate to plate) or wide horizontal projects. The magnets have incredible holding power and will confidently hold the Plate Level in place on steel while you work hands free.

Stabila 33610 6-10 ft. Extendable Plate Level

The Stabila 33610 is a 6-10 Foot Extendable Plate Level Designed for the Residential Stick Framer that Needs Fast and Accurate Wall Installations (Plumb Plate to Plate). Box frame construction will not warp or twist. Fully sealed solid rail (six sided) extension system, eliminates deflection, extension crash, and delivers the smoothest sliding available. Metal stand-offs will not break off in cold weather.

Stabila 38672 72-Inch Magnetic Box Frame Level

The Stabila 38672 72-Inch Magnetic Box Frame Level has a wider profile which means an even stronger frame. The accuracy is certified, top and bottom readings and sports new rubber pad end caps and wall grips that are functional yet removable for flush measuring. Rare Earth magnet technology offers unbelievable holding power to metal studs, beams and pipe.

Stabila 38648 48Inch Magnetic Box Frame Level

Stabila 38648 48 Magnetic Box Frame Level has a wider profile which means an even stronger frame. The accuracy is certified, top and bottom readings and sports new rubber pad end caps and wall grips that are functional yet removable for flush measuring. Rare Earth magnet technology offers unbelievable holding power to metal studs, beams and pipe.

Stabila 29036 36in. Type 80A-2 3-Vial Contractor's Level

Stabila 29036 36in. Type 80A-2 3-Vial Contractors Level has a contoured box beam frame. Solid acrylic vials with spring steel hairline indicators inside vials for accurate reading. The product is designed for the tile installers and everyday use.

Stabila 29048 48Inch Type 80A-2 3-Vial Contractor's Level

Stabila 29048 48 Type 80A-2 3-Vial Contractors Level has a contoured box beam frame. Solid acrylic vials with spring steel hairline indicators inside vials for accurate reading. The product is designed for the tile installers and everyday use.

Stabila 29024 24Inch Type 80A-2 3-Vial Contractor's Level

Stabila 29024 24 Type 80A-2 3-Vial Contractors Level has a contoured box beam frame. Solid acrylic vials with spring steel hairline indicators inside vials for accurate reading. The product is designed for the tile installers and everyday use.

Stabila 30030 96-Inch Padded Nylon Case

Stabila 30030 96-Inch case is strong, padded liner to protect level in transit. It is convenient loop for hanging on pegs and hooks. Tough high strength nylon outer shell. Heavy duty, large tooth zipper. Convenient shoulder strap for easy carrying.

Stabila 38648C 48-Inch Type 96M Magnetic Builder's Level with Carrying Case

The Stabila 38648C 48 Magnetic Builders Level with Carrying Case has a wider profile which means an even stronger frame. The accuracy is certified, it has top and bottom readings and sports new rubber pad end caps and wall grips that are functional yet removable for flush measuring. Rare Earth magnet technology offers unbelievable holding power to metal studs, beams and pipe.

Stabila 59096 Type 96M 5 Pc Magnetic Level Set

Stabila 59096 is a Set of 5 best professional Magnetic Levels. The Magnetic Levels included in this set are 38659 - 59, 38632 - 32, 38624 - 24, 38616 - 16, 25200 - torpedo and the 30059 5 pocket case. The magnets have incredible holding power and will confidently hold the Level in place on steel while you work hands free. These levels have a wider profile which means an even stronger frame. The accuracy is certified, top and bottom readings and sports a new rubber hand grip design. Rubber pad end caps and wall grips that are functional yet removable for flush measuring.

Stabila 25245 10-Inch Type 81SM Die-Cast Magnetic Torpedo Level with 45-Degree Vial

The Stabila 25245 Die-Cast Magnetic Torpedo has level, plumb, and 45-degree vials the are easy to read and a V-groove aluminum frame. The certified level accuracy in the top read position is 1/32 over 72. The level accuracy is guaranteed for life - vials will never fog, leak or require adjustment. Bent levels void warranty.

Stabila 38532 Magnetic Box Frame Level Jamber Set - 78Inch & 32Inch Levels

Stabila 38532 Magnetic Box Frame Level Jamber Set includes the 38578 - 78 level ideal for setting door frames and the 38532 - 32 level ideal for headers, sills and thresholds. This level has a wider profile which means an even stronger frame. The accuracy is certified, top and bottom readings and sports new rubber pad end caps and wall grips that are functional yet removable for flush measuring. Rare Earth magnet technology offers unbelievable holding power to metal studs, beams and pipe.

Stabila 25360 - Die Cast Magnetic Torpedo Level with 360 degree vial and V-groove frame

The Stabila 25360 is a Die Cast Magnetic Torpedo Level with 360 degree vial and V-groove frame. Heavy Duty die-cast frame with big, bright easy to read vials. Certified Level accuracy in top read position is 1/32 over 72. Level accuracy guaranteed for life, vials will never fog, leak or require adjustment

Stabila 59196 5 Pc Type 196 Level Set with Carrying Case

-Crystal clear vials readable in any direction with no change in accuracy tolerance.-Spring steel hairline indicators in vials.-Best frame strength-to-weight ratio.-Removable rubber end caps for scribing in corners and for reading tight header and sill openings.-Rubber end caps grip walls and do not leave marks.-Metal Hang hole for storing level on site.-Large comfortable rubber hand holes.-Fast and accurate installations-Strong, wide frame-Vials are guaranteed for life

Stabila 37948 48-Inch Type 196E Electronic Level with Case

-360 Digital Measuring-Display always reads upright-Select from , slope or audio alert-Top read position accuracy 1/32 over 72-Patented, epoxy-locked vial system-Machined measuring surfaces

Stabila 37924 24 Inch Type 196E Electronic Level with Case

-360 Digital Measuring-Display always reads upright-Select from , slope or audio alert-Top read position accuracy 1/32 over 72-Patented, epoxy-locked vial system-Machined measuring surfaces

Stabila 07468 Laser Elevation Rod

The Stabila 07468 Laser Elevation Rod has locking feature offering infinite settings. The Stabila 07468 Laser has a telescoping aluminum alloy rod sections with easily readable graduations.

Stabila LE 50 06150 Laser Distance Measurer

The Stabila 06140 is one of the worlds smallest and lightest Laser distance measurer. Measuring range up to 100 m. The new laser distance measurer LE 50 from STABILA can measure faster, more accurately and more comfortably. One person using the STABILA LE 50 digital measuring tool can measure quicker and more accurately than two persons using traditional measuring instruments, all without twisting and turning. At the push of a button, the LE 50 calculates the geometric values from length the measurement. The LE 50 features one-hand operation and a simple menu guide.

Stabila LE 200 06200 Laser Distance Measurer

The Stabila 06200 features the calculating convenience of a computing centre in mini-format. Measuring range up to 200 m. The new laser distance measurer LE 200 from STABILA is a really practical tool for every application, on site, in the workshop and during planning. The Stabila 06200 rapidly and securely determines all the measurement values you need. The unit has a wide variety of functions for simple distance measurements, with a built-in computer for measuring areas, volumes and partial and serial measurements automatically. The LE 200 handles difficult construction work height measurements by means of indirect calculation from 3 measured values applying Pythagoras Theorem. The last 15 measurement values are always stored automatically. There is storage space freely available for a further 15 values, where your specific constants can be stored.

Stabila 03150 LA-4P LaserBob 4-Beam Layout Kit

Stabila 03150 LA-4P LaserBob 4-Beam Layout Kit includes 4 Beam Laser, Multi-Functional Base, Wall Plate, Hard Shell Kit Case, Carrying Case, Instruction Manual, Laser Enhancement Glasses. It has wide footprint and rubber feet make the laser stand strong and span over debris. Fully nested on/off button and laser apertures. Easy to open battery compartment with a durable connected cover.

Stabila 08500 V2R Vent To Roof Laser

Digital Read Out- tells you exactly how far from grade you areArrows, point in the direction of and intuitively guide you towards gradeDust and Water proof- submergibleExtremely durable-passes the toughest drop tests of 10Dual displays-front and backLarge 4 laser receiving bandJobsite toughRubberized for ruggednessSelf-Centers automatically in pipes or holes 1 ½-4 Illuminated Vial for dark conditions

Stabila 05500 LAR-200 Off Road Laser System

Tip Over Tough Rubber Exterior, Metal Housing, Shock Absorbing InteriorTemperature Resistant 14F to 140F (-10C to 60C)Dust/ Water-Proof = IP65 RatingFully Automatic Self LevelingRange 1,000 ft. / 300mAccuracy +/- 1/8 at 100 +/- 0.1 mm/mRotation speed 600 rpmOne button operationSelf Leveling Range +/- 5 degreesHigh Alert Shut Down FunctionDust and Water Proof ReceiverSelect range of sound and accuracyPlumb-up BeamOperation time of up to 120 hours on one set of 2 D batteriesWorks with rechargeable batteries

Stabila 06040 LE-40 Laser Distance Measurer

Simple point and shoot operationCompact and Light and durable fits in tool pouchesMeasure and calculate Areas, volumes, partial lengths and add and subtract measurements.Continuous Measure function for tape measure applicationsStorage of the last 19 measurementsReads in inches, inches Visible laser dot for pin point measuring and feet, decimal and fractional and metric

CheckPoint 308 SuperVee Mag Base (for Laser Level)

The CheckPoint 308 Super-Vee Mag Base is a machined, super deep 135-degree billet 6061-t6 aluminum V-groove base with aircraft anodizing, permanent laser engraved graphics and, six rare-earth neodymium magnets. Designed for unsurpassed holding power on 1/2-Inch to 6-Inch diameters the Super-Vee Mag Base will hold 30 times its weight and like its counterpart, the Stubby Mag Base, is a compact 9-Inches long allowing easy laser alignment projection from any piping run or structural tie-in.The Super-Vee Mag Bases V-groove is integrated with radius ends to allow flush alignments to radius bends and/or corners and self-aligns perpendicularly to any pipe utilizing a specially designed Vee-Notch at the center of the base 90-degrees to the main 135-degree V-groove, especially useful when checking for tie in alignments to a specific location on a pipe run using the laser projection.Designed to be used with any of the 880, 770, 660 or 600 series laser tools, the Super-Vee Mag Base is a development accessory derived from the demand of electricians, pipe fitters and fabricators in the professional trades sector.Note: The Stubby Mag Base is flat bottomed to accommodate the Slope Pin System for automatic slope and grade projections).

Kapro 240-01 Surface Level

A small multipurpose level with precast holes for easy attachmentSensitivity 30arc/min. Bulls eye style level.

Kapro 241 9Inch Torpedo Level W/ Detachable Line Level

-Kapro 241 9 Torpedo Level W/ Detachable Line Level

Denver Tools 502 150mm Air Hammer

The Denver Tools 502 is a 150mm Air Hammer which comes with 4 chisels.

Kapro BAG-72 Nylon 72Inch Level Bag

72 Heavy Duty nylon level bag to protect your level.

Denver Tools 301 Jitterburg Sander

The Denver Tools 301 is a pneumatic Jitterburg Sander. This traditional style jitterbug sander with metal construction features a rubber grip and locking clamps to give you a good grip on both the tool and the sandpaper. This sander can be used on many materials including paint, metal and fiberglass.

Denver Tools 816A Air Angle Die Grinder

The Denver Tools 816A is a Air Angle Die Grinder. The angled head provides access to hard to reach places.

Denver Tools 653A 3/8-Inch In-line Air Drill

The Denver Tools 653A is a 3/8-Inch In-line Air Drill with variable speed. This small drill makes drilling in tight spaces easy.

Denver Tools 93486 Mini Grease Gun

The Denver Tools 93486 is a Mini Grease Gun. This small, one-hand operated grease gun is perfect for greasing in tight spaces.

Denver Tools RM016 16 oz Rubber Mallet

The Denver Tools RM016 is a 16 oz Rubber Mallet. This mallet features a double-faced rubber head with a rubber gripped handle.

Denver Tools SC02 1/4-Inch Swivel Connector

The Denver Tools SC02 is a 1/4-Inch Swivel Connector. This connector has a 360 swivel to prevent the air hose from kinking.

Denver Tools 120019 Brad Nailer

The Denver Tools 120021 Brad Nailer drives 18 gauge brad nails from 15mm to 50mm in length. A die cast aluminum body makes this nailer strong and light-weight while a rubber comfort grip handle provides improved control and comfort even during extended use. A touch-strike security system increases safety for the operator and a new 2 spring magizine pushes the nails smoothly. This nailer is ideal for door and window trims, decorative trim, cabinet work, finish paneling, frames and flooring.

Denver Tools 95439 Air Control Unit

The Denver Tools 95439 is an Air Control Unit. This air control unit consists of an air filter, air regulator and an oiler. It helps prevent costly damage to your air tools caused by rust, scale and moisture. It provides clean, dry, regulated air over a wide range of air flows. It is easy to install and maintain.

Denver Tools DBH24 24-Ounce Dead Blow Hammer

The Denver Tools DBH24 is a 24-ounce dead blow hammer. This steel shot filled, bright orange dead blow hammer is an essential part of anyone's toolbox.

Denver Tools ABG2 Air Blow Gun

The Denver Tools ABG2 is an Air Blow Gun featuring a comfortable vinyl coated control lever and durable chrome plated zince cast body.

Couldn't find Stabila Level Toolshere? Are you looking for something else? Search our partner sites: