Saw Trax Vertical Panel Saws                                                                                                                                                                                                              

Saw Trax Vertical Panel Saws tools and information

Find Saw Trax Vertical Panel Saws at best prices and buy!

Saw Trax DRGS Dual Rip Gauges

Easily set and make horizontal cuts Dual pointers allow user to rip from either direction Spring located at the bottom of the tape band keeps the tape taut and precise. Standard on the Varsity, 1000, 2000, and 3000 Series Vertical Panel Saws

Safety Speed Cut H6 Vertical Panel Saw, 3-1/4 HP, 1 Phase, 120V, 15 amps

The H-Series saws from Safety Speed Cut offer full-sized vertical panel saw productivity in economical machines. H-Series saws cut within 1/32 on a wide variety of panel materials up to 1 thick, and are available in three standard crosscutting widths, 50, 64 and 73, the model shown here being the 73 width. H-Series saws are used in all kinds of panel processing applications.

Safety Speed Cut H5 Vertical Panel Saw, 3-1/4 HP, 1 Phase, 120V, 15 Amps

The H-Series saws from Safety Speed Cut offer full-sized vertical panel saw productivity in economical machines. H-Series saws cut within 1/32 on a wide variety of panel materials up to 1 thick, and are available in three standard crosscutting widths, 50, 64 and 73, the model shown here being the 64 width. H-Series saws are used in all kinds of panel processing applications.

Safety Speed Cut H4 Vertical Panel Saw, 3-1/4 HP, 1 Phase, 120V, 15 Amps

The H-Series saws from Safety Speed Cut offer full-sized vertical panel saw productivity in economical machines. H-Series saws cut within 1/32 on a wide variety of panel materials up to 1 thick, and are available in three standard crosscutting widths, 50, 64 and 73, the model shown here being the 50 width. H-Series saws are used in all kinds of panel processing applications.

Safety Speed Cut C5 Vertical Panel Saw, 3-1/4 HP, 1 Phase, 120V, 15 Amps

The C5 panel packs all of the features of the full-size saws into a portable 5 frame. This panel saw can travel to work sites and fit into shops with limited floor space and can handle sheets up to 64 wide.

Safety Speed Cut PRO1K Panel Pro Vertical Panel Saw

The PRO1K Panel Pro was developed by Safety Speed Cut Manufacturing to give do-it-yourselfers, amateur woodworkers, and home hobbyists a tool that allows one person cut large sheets safely and accurately in a small space.The PRO1K Panel Pro allows one operator to cut large sheets of material into finished sizes or into sizes that are easy to handle for further processing. The Panel Pro can be easily stored when not in use because it takes up such a small amount of space. The functionality and portability of the Panel Pro means you can take it right to the job site if preferred.One of the hardest jobs in woodworking is cutting a clean 1/8 off the edge of a big panel. Panel Pro easily does it without a problem! Rip cutting large panels lengthwise is another difficult job, especially for one person. Because it supports the panel so well, the Safety Speed Cut PRO1K Panel Pro makes this job easy, accurate, and safe.

Saw Trax 2064 2000 Series Heavy Duty Panel Saw - 10' Frame, 64Inch Crosscut

Never Goes Out of Square 10 wide powder-coated, welded steel frame 64 maximum cross cut Use circular saw, knife cutter, and router in the same carriage Uses standard 7 Blades Perfect for serious woodworkers and high-production facilities Add a Floating Router Plate for dados

Safety Speed Cut 6400 Vertical Panel Saw, 3 HP, 1 Phase, 120V, 13 Amps

The 6400 vertical panel saw utilizes a heavy-duty worm gear driven saw motor for production applications. The additional steel supports in the frame, worm driven motor, double guide tube bearings and machined aluminum material rollers result in a heavier duty machine with a guaranteed cutting accuracy of 1/64 straight and square. The 6400 cuts panels up to 64 wide.

Safety Speed Cut 6800 Vertical Panel Saw, 3 HP, 1 Phase, 120V, 13 amps

The 6800 vertical panel saw utilizes a heavy-duty worm gear driven saw motor for production applications. The additional steel supports in the frame, worm driven motor, double guide tube bearings and machined aluminum material rollers result in heavier duty machines with a guaranteed cutting accuracy of 1/64 straight and square. The 6800 can handle extra wide sheets up to 73.

Safety Speed Cut 7400XL Vertical Panel Saw, 2 HP, 1 Phase, 220V, 11 amps

The 7400XL saw is designed for continuous production and tight tolerance cutting. With a 2 horsepower, 220V heavy-duty induction motor, this saw handles the toughest applications. The saw carriage travels vertically on two heavy extruded beams utilizing Dual-Vee bearings to deliver cutting accuracy to 0.005 straight and square. The 7400XL offers an extra large 13 frame length for cutting panels in excess of 10 in length and is meant for heavy production requirements, large panels and close tolerance panel processing applications.

Safety Speed Cut 7400XLM Vertical Panel Saw, 3 HP, 3 Phase, 230V, 7.6 Amps

The 7400XLM saw is designed for continuous production and tight tolerance cutting. With a 3 horsepower, 230V heavy-duty induction motor, this saw handles the toughest applications. The saw carriage travels vertically on two heavy extruded beams utilizing Dual-Vee bearings to deliver cutting accuracy to 0.005 straight and square. The 7400XLM offers an extra large 13 frame length for cutting panels in excess of 10 in length and is meant for heavy production requirements, large panels and close tolerance panel processing applications.

Safety Speed Cut 7400XLMA Vertical Panel Saw, 3 HP, 3 Phase, 460V, 3.8 Amps

The 7400XLMA saw is designed for continuous production and tight tolerance cutting. With a 3 horsepower, 460V heavy-duty induction motor, this saw handles the toughest applications. The saw carriage travels vertically on two heavy extruded beams utilizing Dual-Vee bearings to deliver cutting accuracy to 0.005 straight and square. The 7400XLMA offers an extra large 13 frame length for cutting panels in excess of 10 in length and is meant for heavy production requirements, large panels and close tolerance panel processing applications.

Tenryu PP20360AB Panel Pro 8-Inch 60T Panel Saw Blade, 5/8Inch Arbor

The Tenryu PP20360AB is a Panel-Pro 8 60T Panel Saw Blade. Panel Saws are often used to cut large sheets of difficult materials like MDF, melamine or particle board. These materials are laden with chemicals and adhesives which attack the carbide causing corrosion of the cutting edge. The Panel-Pro blades come equipped with our best anti-corrosive micro-grain carbide.

Safety Speed Cut SR5 Vertical Panel Saw & Router, 1 Phase, 3-1/4 HP, 120V, 15 Amps Saw and 1-3/4 HP, 120V, 11 Amps Router

The SR5 is able to saw and rout on one vertical steel welded frame, which is ideal for shops with limited space where both panel sizing and panel routing are performed. This model can be changed from saw to router in less than one minute and has accuracy of 1/64 straight and square. Its equipped with a MID-WAY FENCE? system as standard equipment, which makes the processing of small panels more efficient. The patented self-adjusting router carriage provides for a consistent depth of cut when routing.

Big Horn 18420 Deluxe Table Saw Insert for Jet Saws

-The Big Horn 18416 is a Deluxe Table Saw Insert for Jet saws. The 1/2 thick insert is made of high density PVC. It weighs approx. 18 oz. and is machined for flatness prior to cutting. The deluxe insert will withstand temperatures to 0 without shattering or curling. It fits Jet brand saws.

Safety Speed Cut 7400MA Vertical Panel Saw, 3 HP, 3 Phase, 460V, 3.8 amps

The 7400MA saw is designed for continuous production and tight tolerance cutting. With a 3 horsepower, 460V heavy-duty induction motor, this saw handles the toughest applications. The saw carriage travels vertically on two heavy extruded beams utilizing Dual-Vee bearings to deliver cutting accuracy to 0.005 straight and square.

Safety Speed Cut 7400M Vertical Panel Saw, 3 HP, 3 Phase, 230V, 7.6 Amps

The 7400M saw is designed for continuous production and tight tolerance cutting. With a 3 horsepower, 230V heavy-duty induction motor, this saw handles the toughest applications. The saw carriage travels vertically on two heavy extruded beams utilizing Dual-Vee bearings to deliver cutting accuracy to 0.005 straight and square.

Safety Speed Cut 7400 Vertical Panel Saw, 2 HP, 1 Phase, 220V, 11 Amps

The 7400 saw is designed for continuous production and tight tolerance cutting. With a 2 horsepower, 220V heavy-duty induction motor, this saw handles the toughest applications. The saw carriage travels vertically on two heavy extruded beams utilizing Dual-Vee bearings to deliver cutting accuracy to 0.005 straight and square.

Safety Speed Cut SR5U Vertical Panel Saw & Router, 3 HP, 1 Phase, 120V, 15 Amps Saw and 3-1/4 HP, 120V, 15 Amps Router

The SR5U is an upgrade from the SR5, with a heavier worm gear driven saw and a 3 horsepower router that can be interchanged in less than one minute. The upgrade includes machined aluminum material rollers, an enclosed counterweight, and a MID-WAY FENCE? system. This machine is ideal for cabinet shops, composite panel fabrication and other applications where both panel sizing and panel routing are required functions.

Lenox 30005 5L 3/8-Inch Hex-Shank Hole Saw Arbor for 9L to 19L Hole Saws

Hardened carbon steel for strength provides added durabilityUse for enlarging holesAdjustable pilot bitFits Lenox Hole Saws 9L-19L, 9/16 - 1-3/16

Festool 561174 TS 55 EQ 6-1/4Inch Circular Saw

ToolKing.com promotional discount codes or coupons are NOT valid on Festool productsThe Festool 561174 is a TS 55 EQ 6-1/4 Circular Saw. The TS 55 saw and guide rail system brings the accuracy of a panel saw to any site. The combination provides straight, splinter-free cuts on both sides of the blade right out of the box. Unlike conventional pendulum-cover circular saws, Festools design allows the saw blade to retract into the housing giving user the option to start and end the cut accurately anywhere on the material. All of this innovation means a quicker, safer and more cost-effective precision tool. The dust extraction port ensures less dust and a clear view of the workpiece. Saw close to edges, cut apertures and false joints and cut to length. It is used for solid wood, fine veneered panels and sheet goods of all kinds, plastic and aluminum.

Saw Trax STWH Folding Stand and Wheels

Stand can be folded from the front, like a ladder Pre-attached at the factory when ordered Cross braces give added support Machine can be tilted forward and moved on two large 5 wheels Standard on Varsity, 1000, 2000, 3000 Series

Saw Trax FSTP96 96Inch Flip Stop

Perfect for use with longer sheets or where cutting exact lengths repetitively. Can be placed on either the right or left side of machine. Includes specialized 96 aluminum extrusion, tape and two stops.

Saw Trax SPHD64 Spring Hold Down - 64Inch

Holds thinner materials against frame for more material support. Recommended for materials 1/4 or less. Does not have to be removed when cutting thicker materials.

Milwaukee 49-22-8108 Panel Saw Extension Kit

The Milwaukee 49-22-8108 is a Panel Saw Extension Kit. This extension kit is used with Milwaukees 6480-20 panel saw and is recommended whenever material over 6 ft. in length will be cut frequently. The kit extends the roller material carriage to 18 on each end making the overall roller material carriage 8 ft. in length.

Lenox 30006 6L Hole Saw Arbor

Lenox 30006 is 6L Hole Saw Arbor. It fits Lenox Hole Saws 1 1/2 - 6.

Safety Speed Cut H10 Wheels for All Vertical SSC Panel Saw Models, DNA to SSC-EDGE, TR2, ES52, and WBS Lines

The Safety Speed Cut H10 Wheels allow the machine to be moved easily when in the completely upright position. When the machine is resting on either stand, wheels are disengaged and the machine will not move independently.

DeWalt DW7082 Vertical Clamp (for DW703, DW706, DW708)

The DeWalt DW7082 Vertical Clamp is an accessory for DW703, DW706 and the DW708 miter saws. Vertical clamp, clamps the work piece against the base.

Safety Speed Cut 640B Dust Kit for the 6400 and 6800 Panel Saws

The Safety Speed Cut 640B Dust Kit can be used with your existing dust collection system to efficiently remove most airborne dust particles and maintain a safer, cleaner working environment. For new machine purchases, select a dust kit that matches your model number. For previously purchased machines additional components are required. Vacuums are available for purchase separately.

Rocky Mountain 3746600 64-1/2Inch 18TPI Metal-Cutting Band Saw Blade

Rocky Mountain 3746600 64 1/2 14TPI Metal-Cutting Band Saw Blade. For use with Jet Horizontal Band Saws.

Rocky Mountain 3746000 64-1/2Inch 14TPI Metal-Cutting Band Saw Blade

Rocky Mountain 3746000 64 1/2 14TPI Metal-Cutting Band Saw Blade. For use with Jet Horizontal Band Saws.

Milwaukee 49-56-0032 7/8-Inch Ice Hardened Hole Saw

The Milwaukee 49-56-0032 is a 7/8-Inch Ice Hardened Hole Saw. Ice Hardened trade hole saws are made form a cryogenic hardening process rather than heat to create a more durable and longer lasting hole saw.

Delta 28-565 Band Saw Blade 82 inch X 1/8 inch X 14 TPI (12 inch/16 inch Band Saws) - Gen Purpose

The Delta 28-565 Band Saw Blade is High carbon steel blade with precision machined and set teeth for accuracy. Tension-tested for strength.

Delta 28-567 Band Saw Blade 82 inch X 1/4 inch X 6 TPI (12 inch/16 inch Band Saws) - Gen Purpose

The Delta 28-567 Band Saw Blade is High carbon steel blade with precision machined and set teeth for accuracy. Tension-tested for strength.

Tenryu CF-16540W 6-1/2Inch 40 Teeth Cord-Free Series Circular Saw Blade

The Tenryu CF-16540W is a 6-1/2 40 Teeth Cord-Free Series Circular Saw Blade. This is the first and most complete line of premium saw blade made especially for cordless saws. This blade is used for finer cuts on 6-1/2 cordless saws. The blade fits many manufacturers saws.

Tenryu CF-13530W 5-3/8Inch 30 Teeth Cord-Free Series Circular Saw Blade

The Tenryu CF-13530W is a 5-3/8 30 Teeth Cord-Free Series Circular Saw Blade. This is the first and most complete line of premium saw blade made especially for cordless saws. This blade is used for woodworking on 5-3/8 cordless saws. The blade fits DeWalt & Bosch manufacturers saws.

Milwaukee 49-56-0062 1-1/4 Inch Ice Hardened Hole Saw

The Milwaukee 49-56-0062 is a 1-1/4 Inch Ice Hardened Hole Saw. Ice Hardened trade hole saws are made form a cryogenic hardening process rather than heat to create a more durable and longer lasting hole saw.

Milwaukee 49-56-0193 3-1/2 Inch Ice Hardened Hole Saw

The Milwaukee 49-56-0193 is a 3-1/2 Inch Ice Hardened Hole Saw. Ice Hardened trade hole saws are made form a cryogenic hardening process rather than heat to create a more durable and longer lasting hole saw.

Milwaukee 49-56-0072 1-3/8 Inch Ice Hardened Hole Saw

The Milwaukee 49-56-0072 is a 1-3/8 Inch Ice Hardened Hole Saw. Ice Hardened trade hole saws are made form a cryogenic hardening process rather than heat to create a more durable and longer lasting hole saw.

Milwaukee 49-56-0163 2-3/4 Inch Ice Hardened Hole Saw

The Milwaukee 49-56-0163 is a 2-3/4 Inch Ice Hardened Hole Saw. Ice Hardened trade hole saws are made form a cryogenic hardening process rather than heat to create a more durable and longer lasting hole saw.

Milwaukee 49-56-0127 2-1/8 Inch Ice Hardened Hole Saw

The Milwaukee 49-56-0127 is a 2-1/8 Inch Ice Hardened Hole Saw. Ice Hardened trade hole saws are made form a cryogenic hardening process rather than heat to create a more durable and longer lasting hole saw.

Milwaukee 49-56-0112 1-7/8 Inch Ice Hardened Hole Saw

The Milwaukee 49-56-0112 is a 1-7/8 Inch Ice Hardened Hole Saw. Ice Hardened trade hole saws are made form a cryogenic hardening process rather than heat to create a more durable and longer lasting hole saw.

SawStop TSBC-10L 10-Inch Standard Blade Brake Cartridge for First-Generation CB Saws Only

ToolKing.com is authorized to sell SawStop products only to customers residing in the state of Colorado. Colorado customers can pick up this product at our Lakewood retail showroom or have it shipped in-state via freightliner. If you are consider purchasing a SawStop, please call our Industrial Sales department at 1-800-696-TOOL ext. 202. SawStop price includes freight charges within the state of Colorado for all in-stock saws.The TSBC-10L is only intended for use with first-generation SawStop saws. To determine if this brake cartridge is right for you, please check the model number on your saw. SawStop saws whose model numbers start with "CB" can accept this brake cartridge.The SawStop TSBC-10L is a Standard Replacement Brake Cartridge for first-generation SawStop saws (saws whose model number starts with CB). The cartridge consists of a spring, fuse wire and brake pawl. The TSBC-10L stops the blade, retracts the blade below the table surface in 1/200th (3-5 miliseconds) of a second, and shuts down the power for increased safety.

Safety Speed Cut H23 Folding Stand for the C5 Panel Saw

The Safety Speed Cut H23 Folding Stand allows the C5 machine's frame to free stand independent in or outside of your shop. It folds to the back of the C5 Panel Saw's frame for easy storage and transport while allowing you to set up the machine at a work site or any location.

Milwaukee 49-22-4075 7-Piece Carbide Tipped Job Saver Hole Saw Kit

Milwaukee 49-22-4075 7-Piece Carbide Tipped Job Saver Hole Saw Kit includes the 5 most popular Hole Saw sizes, an arbor, a spacer and an adapter in an impact resistant plastic carrying case. This handy kit covers most everyday hole drilling needs. Hole Saws have the 4 teeth per inch design. Carbide Tipped Hole Saws are used to drill holes in ceramic tile, fiberglass, fiberboard, and flake board. Carbide tipped Hole Saws are NOT recommended for drilling in metal.

MK Diamond 155953 Tile Saw Stand for MK-370

This sturdy steel stand designed for use with the MK Diamond MK-370 and 470 tile saws allowss the operator to have the work surface at a standing height. Stand is only designed to fits the MK-370 and 470 model tile saws.

Delta 28-856 12 inch Band Saw Rip Fence for 12 inch or 14 inch Delta Band Saw

The Delta 28-856 rip fence guides the work piece, allowing more consistent straight cutting with a band saw. It mounts directly to the band saw table and adjusts easily. Fits Delta 12 inch and 14 inch band saws. Includes one rip fence.

Delta 28-564 Band Saw Blade 82 inch X 1/4 inch X 14 TPI (12 inch/16 inch Band Saws - Non-Ferrous Metal)

The Delta 28-564 Band Saw Blade is High carbon steel blade with precision machined and set teeth for accuracy. Tension-tested for strength.

DeWalt DC315K 28V Cordless Reciprocating Saw with NANO Technology - With FREE DC9280 28V Battery and DC519 28V Flexible Floodlight a $180 Value!

DeWalts 28V Cordless Reciprocating Saw with NANO Technology is powered by a combination of a high-efficiency DeWalt built motor and exclusive 28V nano-phosphate lithium ion battery. This combination delivers maximum power and runtime of 28V, but at 8 lbs. weighs one third of a pound less than traditional 18V reciprocating saws. The DC315K is equipped with a DeWalt built high-power, high-efficiency motor with an electric brake, providing enough power for tough jobsite applications. The DC315K also delivers 0-3,000 strokes per minute and a stroke length of 1-1/8 allowing professional contractors to complete tasks quickly and move on to the next job. DeWalt designed the DC315K with a patented four-position keyless blade clamp that enables users to insert the saw blade into two common vertical positions as well as two horizontal cutting positions for added versatility and convenience when flush cutting. With the blade in a horizontal position, users are able to cut close to floors, walls and ceilings, or where clearance is limited. This results in less bending and breaking of blades. The saw also has a three-position adjustable shoe that allows users to easily adjust the depth of cut for increased control and extended blade life.

Hitachi C15FB 15 Inch Heavy Duty Miter Saw - 15 Amp, 11 Positive Stops on Miter Index with Dynamic Electric Brake (No Bevel)

Hitachi C15FB 15-inch miter saw is a heavy-duty tool ideal for people who need to cut big post and beam stock. It has a powerful 15 amp with an electric brake to match its sturdy construction, and can cut material as thick as 4-3/4 inches and as wide as 7-1/2 inches at 0 degrees, and as wide as 5-15/32 at a 45 degree miter. It also comes with a clamp nearly hefty enough to be called a vise for holding the material tight to the fence, and has built-in extension wings to make work with long boards easier. The convenient thumb-operated blade guard lifter that makes it easier to work with big boards that might otherwise cause the guard to hang up. The miter gauge is riveted on, but the numbers and markings are not in relief, so it may need replacing in time as the paint wears off, although the riveted connection will make that replacement a tougher job than it should be. This saw has a vertical handle, like all the Hitachi miter saws, rather than the horizontal configuration many people prefer. This is a reliable miter saw thats designed and built tough enough to remain accurate under demanding job site conditions.

Saw Trax IDEAL Panel Saw Video

Couldn't find Saw Trax Vertical Panel Sawshere? Are you looking for something else? Search our partner sites:

                                            Saw Trax Vertical Panel Saws