Toolrr - Router Bits

Drill Bits Router Bits Sandpaper Saw Blades

Router Bits tools and information

Find Router Bits at best prices and buy!

Porter-Cable 380B120 Bearing Kit Router Bit

The Porter-Cable 380B120 is a Bearing Kit for Router Bits. The kit allows to vary the depth of rabbeting bits or convert regular bits into top-bearing pattern or lettering bits.

Makita By Amana 733328-A 1/2-Inch Handrail/Table Edge Router Bit

The Makita 733328-A are special router bits used for cutting table top edges or used with handrail side profile bits.

Makita By Amana 733336-A 1-5/8 Inch 2 Piece Ogee Stile and Rail Router Bits

The Makita 733336-A is a 2-piece stile and rail router bit set that includes two complete assemblies consisiting of cutter, arbors, and bearings.

Porter-Cable 43072PC 45° Chamfer Router Bit

The Porter-Cable 43072PC is a 45° Chamfer Router Bit. The 43072PC bit is used for 45° bevel cutting. The router bit has a lower depth setting which results in chamfer with fillet. The 43072PC has a Pozi-Stop Shank which automatically locates the bit at the correct height in the collet. This makes switching between bits fast and easy. The Pozi-Stop Shank creates a strong and long lasting bit. The Porter-Cable 43072PC bit includes a Monster Carbide which is 40% thicker carbide than standard bits. This generates less friction and provides smoother cuts.

Delta 43-800 Router Bit Chuck for Heavy-Duty Shapers

The Delta 43-800 is a router bit chuck for heavy duty Shapers. The spindle accepts either 1/4-Inch or 1/2-Inch shank router bits and installs easily in place of the standard spindle. The machined, tapered shaft has a notch that fits into the spindle housing for a slip-free fit.

DeWalt D26670R Factory Reconditioned D26670 5.6 Amp Laminate Trim Router

The Dewalt D26670 is a Factory Reconditioned Heavy-Duty Laminate Trim Router. The laminate trim router allow the user to adjust the base vertically, horizontally, as well as base changes without the need for tools. The D26670 features a 1/4 inch collet to allow for roundover bits, laminate bits and a variety of decorative detail bits. At 5.6 Amps and 30000 RPM it delivers the power and torque for hardwoods and all small router applications. The fixed base accepts standard template guides for ease of use in cutting mini dovetails, hinge butt and strike and latch templates.

Akeda 3800 Dovetail Router Bit Set - 7 Piece

Akeda 3800 is 7-piece Dovetail Bit Set. The Bit Set consists of a plastic storage case containing all five dovetail bits, the .315-Inch Straight Bit, and the .350-Inch Box Joint Bit. All router bits are 8mm shank.

Porter-Cable 42188 Router Sub-Base

The Porter-Cable 42188 is a router sub-base. The Porter-Cable sub-base, with its extra large, 2-1/2 inch center hole, allows the use of larger diameter bits than a standard sub base. It is constructed of clear plastic, providing better visibility. The sub-base installs easily, using existing screws from router base.

Porter-Cable 43578PC 3/8 inch Beading Router Bit

The Porter-Cable 43578PC is a 3/8 inch beading router bit. The bit is used for decorative period edging. The 43578PC router bit has a Pozi-Stop Shank which automatically locates the bit at the correct height in the collet. This makes switching between bits fast and easy. The Pozi-Stop Shank creates a strong and long lasting bit. The Porter-Cable 43578PC bit includes a Monster Carbide which is 40% thicker carbide than standard bits. This generates less friction and provides smoother cuts.

Porter-Cable 43092PC 3/4 inch Roundover Router Bit

The Porter-Cable 43092PC is a 3/4 inch Roundover Router Bit. The Porter-Cable roundover router bit has a unique feature of lower depth setting which results in rounded corner with decorative fillet. The 43092PC bit has a Pozi-Stop Shank which automatically locates the bit at the correct height in the collet. This makes switching between bits fast and easy. The Pozi-Stop Shank creates a strong and long lasting bit. The Porter-Cable 43092PC bit includes a Monster Carbide which is 40% thicker carbide than standard bits. This generates less friction and provides smoother cuts.

Porter-Cable 7310 Laminate Trim Router, 30000 RPM, 5.6 Amps

The Porter-Cable 7310 is a laminate trim router. It has 100% ball bearing construction for durability and smooth operation and a metal lower motor housing for heat dissipation. A powerful 5.6 Amps AC/DC motor turns 30000 RPM to make quick work of trimming tasks. A built-in spindle lock and flat-top design allow for quick and easy one-wrench bit changes. The 1/4 inch collets accepts laminate trimming bits as well as router bits. Precise bit depth adjustments are easy with the Micro-set adjustment knob.

Porter-Cable 7518 3-1/4 HP Speedmatic 5-Speed Fixed Base Router with $40 Mail-In Rebate (exp 1/31/09)

The Porter-Cable 7518 is a 3-1/4 HP Speedmatic 5-Speed Fixed Base Router. It is designed to work with bits as large as 4 inches in diameter and has electronic soft start and five speeds. The model features auto release collet system, which eliminates the problem of frozen bits and the need for rapping on the collet to remove them.

Porter-Cable 43584PC 3/8 inch Cove Router Bit

The Porter-Cable 43584PC is a 3/8 inch Cove Router Bit. The bit is used for cutting decorative edging and inverted radii. The 43584PC has a Pozi-Stop Shank which automatically locates the bit at the correct height in the collet. This makes switching between bits fast and easy. The Pozi-Stop Shank creates a strong and long lasting bit. The Porter-Cable 43584PC bit includes a Monster Carbide which is 40% thicker carbide than standard bits. This generates less friction and provides smoother cuts.

Porter-Cable 43405PC 3/8 inch Roundover Router Bit

The Porter-Cable 43405PC is a 3/8 inch Roundover Router Bit. The 43405PC bit has a Pozi-Stop Shank which automatically locates the bit at the correct height in the collet. This makes switching between bits fast and easy. The Pozi-Stop Shank creates a strong and long lasting bit. The Porter-Cable 43405PC bit includes a Monster Carbide which is 40% thicker carbide than standard bits. It generates less friction and provides smoother cuts.

Porter-Cable 7312 Offset Base Laminate Trim Router, 30000 RPM, 5.6 Amps

The Porter-Cable 7312 is a laminate trim router. It is powered by 5.6 Amp motor which turns at 30000 RPM to make quick work of trimming tasks. The offset base allows trimming of backsplashes and trimming into tight corners. It has 100% ball bearing construction for durability and smooth operation and a metal lower motor housing for heat dissipation. A built-in spindle lock and flat-top design allow for quick and easy one-wrench bit changes. The 1/4 inch collets accepts laminate trimming bits as well as router bits.

DeWalt DW621K 2 HP Electronic Variable Speed Plunge Router Kit

The DeWalt DW621K features a built in dust collection mechanism. The DeWalts DW621K router is the first professional router which includes a built-in dust collection. The DeWalt DW621K has a powerful, 2 HP motor to handle the most challenging cuts. The electronic variable speed provides constant feedback so the motor wont slow down in heavy cuts. The rack-and-pinion height adjustment makes depth adjustment quick and accurate. The DeWalt DW621K includes 1/4 and 1/2 collets, a vacuum adapter, a universal edge guide with dust collection and fine fence adjuster for precision positioning of the parallel fence, a template guide bushing adapter which accepts universal guide bearings (1-3/16), a wrench for changing bits and a heavy-duty carrying case with storage space for 1/4 and 1/2 bits, collet, wrench, edge guide and guide rods.

DeWalt D26670K Heavy-Duty Laminate Trim Router Kit With 3 Bases, 5.6 Amps, 30000 RPM

The DeWalt D26670K is a Heavy-Duty Laminate Trim Router Kit With 3 Bases. The laminate trim router kit allows the user to adjust the base vertically, horizontally, as well as base changes without the need for tools. The tool features a 1/4 collet to allow for round over bits, laminate bits and a variety of decorative detail bits. At 5.6 Amps and 30000 RPM the tools delivers the power and torque for hardwoods and all small router applications. The fixed base accepts standard template guides for ease of use in cutting mini dovetails, hinge butt and strike and latch templates. The tool offers a tilt base, standard base with ball-bearing guides and offset base for nearly any and all laminate trimming applications.

Porter-Cable 9690LR Factory Reconditioned 1-3/4 HP Router

The Porter-Cable 9690L is a Factory Reconditioned 1-3/4 Peak HP Router. The Porter-Cable 9690L has an 11 Amp motor which delivers 27500 RPM. It has auto-release collet system ends frozen bits. The Porter-Cable 9690L features a precision machined aluminum motor housing & base. The Porter-Cable 9690L has an accurate micrometer depth-of-cut adjustment to 1/128 inches.

Porter-Cable 43550PC Classical Stile 3/8 inches Tongue Router Bit

The Porter-Cable 43550PC is a Classical Stile 3/8 inches Tongue Router Bit. It is constructed of 4140 alloy steel, a harder grade of steel than standard cast steel bit bodies. The is annealed and heat treated to Rockwell hardness of 40-45% harder than is possible with cast steel bodies. The bits are precisely ground using computer controlled machining for precision tolerances and perfectly concentric shafts. The carbide tip is made from a specially blended micro grain carbide for superior results and longer lasting sharpness.

Porter-Cable 43551PC Classical Rail 3/8 inches Tongue Router Bit

The 'Porter-Cable 43551PC is a Classical Rail 3/8 inches Tongue Router Bit. It is constructed of 4140 alloy steel, a harder grade of steel than standard cast steel bit bodies. The is annealed and heat treated to Rockwell hardness of 40-45% harder than is possible with cast steel bodies. The bits are precisely ground using computer controlled machining for precision tolerances and perfectly concentric shafts. The carbide tip is made from a specially blended micro grain carbide for superior results and longer lasting sharpness.

Porter-Cable 7539 3-1/4 Horsepower 5-Speed Plunge Router

The Porter-Cable 7539 is a well-balanced 3-1/4-horsepower 5 speed plunge router, which is easily one of the most powerful, accurate and dependable tool in its category. With minimum vibration and the most precise cuts, the Porter-Cable 7539 plunge router is ideal for pattern and groove cutting, trimming and shaping, window cutting and chamfering. The 6-position depth rod with adjustable turret makes stepped or repeated plunge cuts easy. The 5-speed router runs off 110 V AC only and is rated at 15 amps. The Porter-Cable 7539 with an electronic, soft 5-speed start delivers 10000,13000,16000,19000 and 21000 rpm for different router bit cutting diameters and applications. The toggle switch feature allows the user to gradually increase the speed from 10000 rpm to 24000 rpm. The Porter-Cable 7539 maintains a sustained speed even with a heavy load. The on/off switch also helps to restart the tool in case of overheating. The slow start and gradual increase in speed decreases the initial torque and thus avoids the possibility of the plunge router twisting out of hand. The problem of frozen bits and need for rapping of the collets is negated by the auto release collets system feature with ½ collet capacity. The Porter-Cable 7539 5-speed plunge router has a large bit capacity and it can work even with 4 inch bits. With a net weight of 17-18 lbs and a base diameter of 7, this tool comes with 100% sealed ball bearings.

Makita By Amana 733326-A 1/2-Inch Supertrim/Flush Trim Router Bit

The Makita 733326-A is one of the new upshear trim bits for exceptional speed and super-fine finish. The 733326-A is furnished with steel bearing.

DeWalt DW621R Factory Reconditioned DW621 Heavy-Duty 2-Horsepower Variable Speed Plunge Router

DeWalts DW621 router is the first professional router to include a built-in, effective dust collection, not an expensive or clumsy add-on. In addition, the DeWalt DW621 has a powerful, 2 HP motor to handle the most challenging cuts. The electronic variable speed provides constant feedback so the motor doesnt slow down in heavy cuts. The rack-and-pinion height adjustment makes the depth adjustment quick and accurate. The DeWalt DW621 is equipped with long-length, precision-machined 1/4 and 1/2 collets and a wrench for changing bits.

Porter-Cable 690LRVS 1-3/4 HP Variable Speed Fixed Base Router

The Porter-Cable 690LRVS is a 1-3/4 Peak HP Variable-Speed Router. The 1/2 inch and 1/4 inch self-releasing collets are very important when bit changes are necessary. The 11 Amps, all aluminum motor housing and base on the Porter-Cable 690LRVS ensure cool running even with large diameter bits. The electronic variable speed switch allows to fine tune the revolutions per minute from 10000-27000 RPM. The speed can be adjusted to match the size of the bit and the hardness of the wood to eliminate burning and chattering. The Under table stop prevents motor from inadvertently rotating out of base.

Amana 49550 Handrail / Table Edge Router Bit - Ball Bearing Guide, 1/2Inch Shank, 1-3/4Inch Radius

This special router bit is used for cutting table top edges or used with handrail side profile bits Includes #47706 1/2 standard bearing. #47702 3/8 bearing can be ordered seperately. 16,000 max. RPM 1/2 shank. Two flute. Cut diameter 2-3/4, flute length 5/8, radius 1-3/4 Overall length 2-1/2

Bench Dog 40-039 Zero Clearance Insert (Polymer Insert for ProLifts and ProPlate Alum)

Bench Dog 40-039 Zero Clearance Insert is to be used with small bits and small pieces of stock. It prevents small stock from falling into the router bit opening. Resists melting and wont harm your router bits.

Porter-Cable 7539R Factory Reconditioned 7539 3-1/4 Horsepower 5-Speed Plunge Router

Powermatic 1791207 PM2700-.25RC 1/4-Inch Collet for the PM2700 Shaper

The Powermatic 1791207 is an accessory for the Powermatic PM2700 Shaper. It can be used to install 1/4 router bits for use with the PM2700 Shaper.

Bosch 1617EVSPK-XP 2.25 Combination Plunge and Fixed Base Router w/ Accessory Pack

The Bosch 1617EVSPK is used as fixed-base or plunge router. It features a 12 Amp, 2-1/4 HP, 8000 to 25000 RPM (no-load) motor with plunge base and fixed base in a rugged well-organized carrying case. The kit features the exclusive quick-clamp system, allowing tool-free movement of motor from base to base. Other key features include variable speed, soft-start and Constant Response circuitry that maintains speed under load. The depth adjustment system features coarse and microfine bit depth adjustment with re-settable indicators. Both bases have large base openings with 2 inch sub-base openings, accepting larger bits and providing better visibility. The routers right or left switch and cord locations provide both choice and consistency and the motor does not rotate during depth adjustment. The tool-free templet guide adapter allows quick changes and both bases feature the Bosch exclusive precision centering design for centering optional templet guides. The motor has a one-piece armature shaft for accuracy and long bit shank capacity. The Bosch 1617EVSPK-XP includes an accessory package which features a router guide, three template guides (5/16-Inch, 7/16-Inch and 5/8-Inch) and a dust extraction hood.

Eclipse 800-129 33 Pc Screwdriver Set with Bits

Eclipse 800-129 is a 33 Piece Screwdriver Set with Bits.

Valuemax VM040312 4-Piece Chamfer Bits Set - 1/2-Inch Shank

Valuemax VM040312 is a 1/2-Inch Shank, 4-Piece Chamfer Bits Set.

Makita 711147-A-25 1/4-Inch x 4-Inch SDS Drill Bits 25 Pack

The Makita 711147-A-25 is a pack of 25 1/4-Inch x 4-Inch SDS Drill Bits.

Makita 711148-A-25 1/4-Inch x 6-Inch SDS Drill Bits 25 Pack

The Makita 711148-A-25 is a pack of 25 1/4-Inch x 6-Inch SDS Drill Bits.

Grip 62401 25 Piece 2-Inch #2 Phillips Bits

The Grip 62401 is set of 25 2-Inch #2 Phillips Bits.

Makita 711161-A-25 1/2-Inch x 6-Inch SDS Drill Bits 25 Pack

The Makita 711161-A-25 is a pack of 25 1/2-Inch x 6-Inch SDS Drill Bits.

Makita 711155-A-25 3/8-Inch x 6-Inch SDS Drill Bits 25 Pack

The Makita 711155-A-25 is a pack of 25 3/8-Inch x 6-Inch SDS Drill Bits.

Makita 711144-A-25 3/16-Inch x 8-Inch SDS Drill Bits 25 Pack

The Makita 711144-A-25 is a pack of 25 3/16-Inch x 8-Inch SDS Drill Bits.

Bondhus 10836 Set of 12 Balldriver Power Bits - Inches

-Balldriver® power bits are designed for power tools having 1/4 hex adapter. Saves time and increases productivity. All power bits are 3 long.

Bondhus 10899 Set of 9 Balldriver Power Bits - Metric

-Balldriver® power bits are designed for power tools having 1/4 hex adapter. Saves time and increases productivity. All power bits are 3 long.

Senco EA0143 1Inch Replacement Duraspin Square Bits (5 Pack)

The Senco EA0143 is a pack of 5 1 Replacement Duraspin Square Bits. These duraspin drive bits are for use with Senco DS205-14V, DS275-18V and DS300-AC and DS300-24V screwguns.

Big Horn 18120 Router Plate Installation Kit

-The Big Horn 18120 is a Router Plate Installation Kit. The kit is used to install 18100 router plates into a shop made router table. It includes a special spacer collar to produce the stepped recess needed for a perfect fit every time.

Festool 493566 Guide Bushing Adaptor for OF 1400 Router

ToolKing.com promotional discount codes or coupons are NOT valid on Festool products The Festool 493566 is a Replacement Guide Bushing Adaptor for OF 1400 Router. It allows use of industry standard 2 piece threaded guide bushing assemblies with OF 1400 router.

Festool 469627 Guide Bushing Adaptor for OF 2000 Router

ToolKing.com promotional discount codes or coupons are NOT valid on Festool products The Festool 469627 is a Replacement Guide Bushing Adaptor for OF 2000 Router. It allows use of industry standard 2 piece threaded guide bushing assemblies with OF 2000 router.

Festool 469625 Guide Bushing Adaptor for OF 1010 Router

ToolKing.com promotional discount codes or coupons are NOT valid on Festool products The Festool 469625 is a Replacement Guide Bushing Adaptor for OF 1010 Router. It allows use of industry standard 2 piece threaded guide bushing assemblies with OF 1010 router.

Bondhus 11099 Set of 9 Balldriver Insert Bits - Metric

-Balldriver® insert bits are designed for hand and power tools having 1/4 hex adapter. Ideal for production and assembly operations where time is critical. All insert bits are 1 long.

Bondhus 11036 Set of 12 Balldriver Insert Bits - Inches

-Balldriver® insert bits are designed for hand and power tools having 1/4 hex adapter. Ideal for production and assembly operations where time is critical. All insert bits are 1 long.

Festool 574268 Plunge Router

ToolKing.com promotional discount codes or coupons are NOT valid on Festool products-Tough, 1/2 collet production-grade router with double bearings for lasting precision. Fast and precise depth setting, electronic speed control. Very low vibration and ergonomic handle design make even long jobs go easy. Fiber base runner prevents surface marring.