Power Tools tools and information

Find Power Tools at best prices and buy!

K-D Tools KD 2897 Pulley Puller and Installer Set

The K-D Tools KD 2897 is a Pulley Puller and Installer Set. It removes pressed-on alternator and power steering pulleys on late-model GM, Ford and Chrysler engines. Its threaded end installs late-model GM alternator and power steering pulleys, including Quad 4.

Irwin 394100 Power Grip Set (7 Piece)

The Irwin 394100 is a 7 piece Power Grip Set. The set is designed for use with power tools. The 1/4 hex shank fits most power tools. It has reverse spiral flutes which are designed to bite down to provide maximum gripping power.

DeWalt BAG6PC Empty Tool Bag for 18 Volt Tools

The DeWalt BAG6PC is an Empty Tool Bag for 18V Tools. The empty tool bag from DC6KITA 6-tool cordless combo kit easily holds 6 power tools plus accessories. It has heavy-duty ballistic nylon for long life. It features reinforced bottom and side panels. Double stitching and steel rivets for maximum durability Heavy-Duty handles allow heavy loads.

Bondhus 10836 Set of 12 Balldriver Power Bits - Inches

-Balldriver® power bits are designed for power tools having 1/4 hex adapter. Saves time and increases productivity. All power bits are 3 long.

Bondhus 10899 Set of 9 Balldriver Power Bits - Metric

-Balldriver® power bits are designed for power tools having 1/4 hex adapter. Saves time and increases productivity. All power bits are 3 long.

Bench Dog 40-028 Power-Loc Auxiliary Safety Power Switch

Bench Dog 40-028 Power-Loc is an auxiliary power switch that can be mounted almost anywhere. Its aluminum housing has six t-slots, and comes with an angle bracket for universal mounting. The lighted switch warns you when the power is on, crucial when using routers and other power tools that already come with their own power switch. Power-Loc also comes with a safety lock to help prevent accidental tripping. 15 amp, 120 volt, 8 cord. Nonmagnetic.

K-D Tools KD 2222 Brake Bleeder Tank

The K-D Tools KD 2222 is a Brake Bleeder Tank. It fills and pressurizes standard and power and ABS brake systems. Diaphragm separates air and fluid. Pressure relief valve prevents damage to the tank and brake systems by preventing excess air pressure. Quick disconnect coupler and shutoff valve is used as a source for brake fluid when topping off master cylinders with brake bleeder adapter attached.

Tenryu PT-18524AM 7-1/4Inch 24 Teeth Power Tool Series Circular Saw Blade

The Tenryu PT-18524AM is a 7-1/4 24 Teeth Power Tool Series Circular Saw Blade. This thin kerf power tool series is for the contractor. The blade is for portable and stationary power tools. Thin kerf wood cutting blade is designed especially for smooth cuts on miter and slide-compound.

OTC 4530 Stinger Power Steering Pump Pulley Service Kit

The OTC 4530 is a Stinger Power Steering Pump Pulley Service Kit. The OTC 4530 is complete set of tools required to remove and install power steering pump pulleys of most domestic vehicles. It fits pulley hubs with diameters of 1- 1/8, 1-1/4, 1- 5/16 and 1-3/8. It includes the necessary adapters for servicing GM 3.1 L, 3100, 3400 and 3800 V6 engines, GM 2.3L Quad 4 four-cylinder engines and Ford 4.6L, 5.4L and 5.8L modular V8 engines. A blow-molded plastic storage case keeps set contents organized and protected from loss.

Tenryu PT-18524-P 7-1/4Inch 24 Teeth Power Tool Series Circular Saw Blade

The Tenryu PT-18524-P is a 7-1/4 24 Teeth Power Tool Series Circular Saw Blade. This thin kerf power tool series is for the contractor. The blade is for portable and stationary power tools. Thin kerf wood cutting blade is designed especially for smooth cuts on miter and slide-compound. This blade is primarily used for portable saws and 8-1/4 table saws.

Denver Tools 502 150mm Air Hammer

The Denver Tools 502 is a 150mm Air Hammer which comes with 4 chisels.

Denver Tools 93486 Mini Grease Gun

The Denver Tools 93486 is a Mini Grease Gun. This small, one-hand operated grease gun is perfect for greasing in tight spaces.

Denver Tools RM016 16 oz Rubber Mallet

The Denver Tools RM016 is a 16 oz Rubber Mallet. This mallet features a double-faced rubber head with a rubber gripped handle.

Denver Tools 653A 3/8-Inch In-line Air Drill

The Denver Tools 653A is a 3/8-Inch In-line Air Drill with variable speed. This small drill makes drilling in tight spaces easy.

Denver Tools 95439 Air Control Unit

The Denver Tools 95439 is an Air Control Unit. This air control unit consists of an air filter, air regulator and an oiler. It helps prevent costly damage to your air tools caused by rust, scale and moisture. It provides clean, dry, regulated air over a wide range of air flows. It is easy to install and maintain.

Spring Tools PPM503 Medium Pin Punch Set

Spring Tools PPM503 is a Medium Pin Punch Set. Pin punch sets are a must for every mechanics tool box. The tools are crafted with professional mechanics grade hardened steel and are ideal for removing pins in difficult to reach areas. Designed to remove drift pins, roll pins, clevis pins, spring pins and others.

Denver Tools ABG2 Air Blow Gun

The Denver Tools ABG2 is an Air Blow Gun featuring a comfortable vinyl coated control lever and durable chrome plated zince cast body.

Denver Tools AR2 Brass Air Regulator with Gauge

The Denver Tools AR2 is a Brass Air Regulator with Gauge. This regulator and guage allow you to monitor and control the air flow and pressure of your compressor.

Denver Tools DHTCZ-1 Zine Dual Head Tire Chuck

The Denver Tools DHTCZ-1 is a Zine Dual Head Tire Chuck for inflating tires.

Denver Tools 811B 1/4-Inch Air Die Grinder

The Denver Tools 811B is a 1/4-Inch Air Die Grinder. This powerful air die grinder is compact and lightweight making it easy to use for most grinding, deburring and polishing applications.

Denver Tools 94346 Mini Air Line Filter

The Denver Tools 94346 is a Mini Air Line Filter. This 40 micron particle filter can operate at up to 135 PSI and 140 degrees Fahrenheit. The reservoir of this filter is made of durable polycarbonate and features a push style drain.

Denver Tools TC1 Air Brass Tire Chuck

The Denver Tools TC1 is a Air Brass Tire Chuck. This solid brass air chuck has a standard 1/4-Inch NPT fitting and can be used to inflate various types of tires.

Denver Tools ABK2 Professional Air Brush Kit

The Denver Tools ABK2 is a Professional Air Brush Kit. This kit includes everything needed for painting model cars, trains and art detail projects, stenciling, stippling, base coats and much more.

Denver Tools QC1 5-Piece Brass Quick Coupler Set

The Denver Tools QC1 is a 5-piece set of quick couplers.  These durable brass couplers allow you to easily and quickly connect your air tools to an air hose.

K-D Tools KD 2428 Compression Tester

The K-D Tools KD 2428 is Compression Tester. It checks cylinder compression from 0 to 300 PSI (0 to 21kg/cm2). Adapters fit 14 mm and 18 mm spark plug holes and special air-hold valve is included to reset gauge easily. It is a serviceable product.

K-D Tools 298 Brake Spring Pliers

The K-D Tools 298 is a Brake Spring Plier. The tool easily removes and installs shoe return springs on most drum brakes. Socket end removes spring from anchor stud and notched end installs spring on anchor. It is chrome plated to resist rust and provides easy cleanup.

K-D Tools 2038 Window Moulding Remover

The K-D Tools 2038 is a Window Moulding Remover. It removes window molding clips on GM, Ford and AMC vehicles. To remove the window moulding, jaw has to be placed flat against glass. Locate clips and roll them out with tip, keeping jaw flat to glass.

K-D Tools KD 2043 Tapered Reamer

The K-D Tools KD 2043 is Tapered Reamer. This tool reams as well as deburs, aligns and enlarges holes from 1/8 to 1/2. It accurately grounds tempered steel with 3-1/2 blade. It turns clockwise and use cutting oil for best results. Reamer comes with a comfortable plastic-grip handle.

Denver Tools 19212810 1/2-Inch Electric Impact Wrench

The Denver Tools 12810 is a 1/2-Inch Heavy Duty Industrial Electric Impact Wrench. The 19212810 Electric Impact Wrench has a reversiable 7.5amp moter and rugged die cast aluminum gear housing. A rocker trigger allows for easy one-hand operation.

Denver Tools 417002 3/8-Inch Electric Angle Drill

The Denver Tools 417002 is a 3/8-Inch Electric Angle Drill. This reversible drill features an easy to operate pull on/off paddle switch and a locking mechanism for continuous rotation. The ergonomic design and 55 degree angled chuck this drill easy to use in confined working areas.

Jet 708025 CTJ-1 Carving Tool Jig for JSSG-10 Slow Speed Wet Sharpener

-For carving tools and other short tools-Clamps narrow or butt chisels firmly-Internal vee shape automatically centres the tool-Power carving blades can be sharpened on the Jet Wetstone

K-D Tools KD 3804 Cable Hose Clamp Tip

The K-D Tools KD 3804 is a Cable Hose Clamp Tip. This tip can be use with gear plier system.

Denver Tools 610002 4 Ton Hydraulic Bottle Jack

The Denver Tools 610002 is a 4 Ton Hydraulic Bottle Jack. This compact jack is durable and easy to use.

Denver Tools 610001 2 Ton Hydraulic Bottle Jack

The Denver Tools 610001 is a 2 Ton Hydraulic Bottle Jack. This compact jack is durable and easy to use.

Denver Tools MSS10 5 Piece 1/8-Inch Die Grinding Stone Set

The Denver Tools MSS10 is a 5 Piece 1/8-Inch Die Grinding Stone Set with 5 assorted mounted grinding stones.

Denver Tools 610003 6 Ton Hydraulic Bottle Jack

The Denver Tools 610003 is a 6 Ton Hydraulic Bottle Jack. This compact jack is durable and easy to use.

Denver Tools MSS101 5 Piece 1/4-Inch Die Grinding Stone Set

The Denver Tools MSS101 is a 5 Piece 1/4-Inch Die Grinding Stone Set with 5 assorted mounted grinding stones.

Fastcap POWER MAG Power Magnets

The Fastcap POWER MAG is a set of 10 Power Magnets. These high-performance neodymium magnets will transform the way you think about and use magnets. They are versatile and powerful and can be used to make invisible magnetic catches, as well as hold anything and everything to metal.

K-D Tools 2286 Harmonic Balancer Puller

The K-D Tools 2286 is a Harmonic Balancer Puller. The puller removes balancers, pulleys and gears with tapped holes. A floating swivel prevents damage to the shaft end. Four slots in the yoke allow for 2- or 3-hole applications. It has tool bolts to balancer with center screw on the end of the crankshaft. Tighten while tapping on the screw head to remove balancer. Puller includes 3/8-24 UNF, 5/16-18 UNC, 3/8-16 UNC and 10 mm x 1.5 screws for most American and imported cars.

Denver Tools 613002 2 Ton Engine Crane

The Denver Tools 613002 is a 2 Ton Engine Crane. This engine crane has four settings for half ton, full ton, one and a half ton and two ton loads and features a hydraulic action pump for easy lifting. The legs and easily fold up into the body for easy storage and four caster wheels are attached to the bottom of the main body so it can easily be rolled away.

Spring Tools IPTS108 Impact Driver Set

Spring Tools IPTS108 is an Impact Driver Set. Combination impact tool and screwdriver for re-coining damaged, corroded or rusty fastener heads, and removing sticky, unmovable rusted fasteners or corroded threads. Pull back the ball holding the high tension spring, striking the fastener head, causing up to 5,000 lbs of impact on the fastener head - then use as screwdriver to remove fastener.

Delta 50-274 Mobile Base for Delta Tools

The Delta 50-274 is a mobile base for delta tools. Delta mobile base provides stationary machines with increased mobility for positioning them at any place, whether its across the shop or out-of-the-way for convenient storage. Delta mobile bases are made of heavy-gage steel and feature a foot-operated control lever that raises and lowers the base for easy movement and positioning.

K-D Tools KD 2289 Pitman Arm Puller

The K-D Tools KD 2289 is a Pitman Arm Puller. It removes full-size pitman arms. While using it, jaws are mounted over pitman arm and center screw is turned with wrench until tight. To release pitman arm center screw is striked with hammer. No Other tools are needed.

K-D Tools KD 9308 8-Piece SAE Combination GearWrench Set

The K-D Tools KD 9308 is a 8-Piece SAE Combination GearWrench Set. This ratcheting set needs as little as 5 to move fastener.

K-D Tools KD 9312 13-Piece SAE Combination GearWrench Set

The K-D Tools KD 9312 is a 13-Piece SAE Combination GearWrench Set. This ratcheting set needs as little as 5 to move fastener.

K-D Tools KD 9309 4-Piece SAE Combination GearWrench Set

The K-D Tools KD 9309 is a 4-Piece SAE Combination GearWrench Set. This ratcheting set needs as little as 5 to move fastener.

Denver Tools AHPE02 1/4-Inch x 50-Foot Recoil Air Hose

The Denver Tools AHPE02 is a 1/4-Inch x 50-Foot Recoil Air Hose. This self storing air hose snaps back into shape just like a telephone cord.

Denver Tools A280 Air Flow Regulator with Pressure Gauge

The Denver Tools A280 is an Air Flow Regulator with Pressure Gauge. This regulator and guage allow you to monitor and control the air flow and pressure of your compressor.

Denver Tools ABG5 24-Inch Professional Air Blow Gun

The Denver Tools ABG5 is a 24-Inch Professional Air Blow Gun. This air gun included a rubber tip as well as a 24-Inch wand attachment.

Denver Tools ABG3 5 Piece Air Blow Gun Kit

The Denver Tools ABG3 is a 5 Piece Air Blow Gun Kit. This kit comes with a nickel plated brass body air gun and four assorted tips.

fun with power tools

Couldn't find Power Toolshere? Are you looking for something else? Search our partner sites: