Toolrr - Porter-Cable Tools

Search By Brand / Porter-Cable Tools

Porter-Cable Air Tools Porter-Cable Cordless Tools Porter-Cable Drills Porter-Cable Planers & Joiners Porter-Cable Router Accessories Porter-Cable Routers Porter-Cable Sander Accessories Porter-Cable Sanders Porter-Cable Saws Porter-Cable Reconditioned Tools Porter-Cable Combo Kits All Porter-Cable

Porter-Cable Tools tools and information

Find Porter-Cable Tools at best prices and buy!

Porter-Cable Bag Empty Two-Tool Bag

The Porter-Cable BAG is an 2-Tool Bag. The empty tool bag is for cordless tools. It easily holds 2 power tools. It has heavy-duty ballistic nylon for long life. The bag features reinforced bottom and side panels, double stitching and steel rivets for maximum durability and heavy-duty handles for allowing heavy loads.

Porter-Cable 8823 19.2-Volt NiCd Battery Pack

Allows users to run multiple tools off of the same battery packPowers all Porter-Cable 19.2-Volt tools excluding the 9836 DrillWorks with 9884 Drill, 9887 Hammer Drill, 9845 SawBoss, and 881 FlashlightSlide-on design for easy removal and replacementHigh-capacity battery delivers 18% more runtime than standard batteries

Porter-Cable PCL180DK-2 18-Volt Cordless Lithium Drill/Driver Kit

The Porter-Cable PCL180DK-2 is an 18-Volt Cordless Lithium Drill/Driver Kit. Any drilling job is doable with Porter-Cable's 18 Volt Lithium Drill and Driver Kit. This compact, light-weight drill easily fits into tight spaces not accessible with larger tools. Its 2-position gear box offers flexibility for high-speed drill and driving, and low speed for high-torque applications. And with the Li-Ion batteries and fast charger, you have extended run time for long projects.

Porter-Cable CFNBNS Factory Reconditioned Three Nailer/Compressor Combo Kit

The Porter-Cable CFNBNS is a Factory Reconditioned Combo Kit, which includes a Finish Nailer, Brad Nailer, Stapler, and Compressor.The 150-PSI Porter-Cable compressor with two couplers works on standard household current. Besides driving a large quantity of nails in a single tank charge, the 6-gallon compressor proves useful for other pneumatic tools as well. The two quick connect couplers allow two nail guns to powered at the same time. Besides being quick on recovery, it is also oil-free and maintenance free. This portable compressor weighs just 34 pounds and has a handle on top for easily moving it around.The hardened driver blade ensures maximum durability and reliability for the Porter-Cable nailer. The special design of the tool-free jam release affords a clear line of sight and cuts down on interruptions. The nailers depth of drive can be easily adjusted and the nose tip does not mar the work surface. Die-cast aluminum used in the construct of the body makes the nailer lightweight for extended hours of use and yet strong enough to withstand the harsh jobsite treatment. The Porter-Cable stapler is sturdy and responsive, and does well for upholstery and other furniture coverings etc.

Porter-Cable 690LR 1-3/4 HP Fixed Base Router with Mail-In Rebate (exp 1/31/09)

The Porter-Cable 690LR 1-3/4 Peak HP Router tools features an increased horsepower up to 1-3/4 and the incorporation of new one-handed lever-release height adjustment. A dust proof switch and larger, more ergonomic handle is added for better control. The Porter-Cable 690LR features a precision machined aluminum motor housing and base, 1/64 inch micrometer depth-of-cut adjustment, 100%\ sealed ball bearing construction and 1/4 inch and 1/2 inch auto-release collets to ensure bit changes are as smooth as the router itself.

Porter-Cable FCN200 Factory Reconditioned 2 inch Flooring Cleat Nailer, 70-100 PSI

The Porter-Cable FCN200 is a Factory Reconditioned 2 inch Flooring Cleat Nailer. Installing hardwood floorings is easy using the professional grade flooring cleat nailer. Because it uses cleats instead of nails or staples, the nailer fastens 3/4 inches hardwood floors securely while allowing the wood to expand and contract during seasonal temperature and humidity changes. The reconditioned nailer sits upright for smoother floor installation which gives better balance and stability. The tools pneumatic drives cleats to a consistent depth.

Porter-Cable RN175A Factory Reconditioned 7/8 inches to 1-3/4 inches Coil Roofing Nailer, 70 - 120 PSI

The Porter-Cable RN175A is a Factory Reconditioned 7/8 inches to 1-3/4 inches Coil Roofing Nailer. The tool has a collated clipped head and nail length specifications to meet the roofing and nailing demands of any project. The new rounded body style offers increased comfort and the overall design has doubled the life of tool. The RN175A has a new rubber grip for increased ergonomics and aesthetics. The new roofing nailer has a selectable trigger that works in either restrictive or contact mode, which does not require any tools or other mechanism to switch from restrictive to contact mode. The RN175A uses 15 3/4 inches to 1-3/4 inches wire collated roofing nails.

Porter-Cable 43229 Solid Carbide Burr Bit - 1/4 inches

Solid carbide construction Durable, with long lasting sharpness Cuts ceramic tile and cement board Fits many cutout or rotary tools 1-pack

Porter-Cable 42186 Router Sub-Base

The Porter-Cable 42186 is a router sub-base. The Porter-Cable sub-base is the standard replacement for Porter-Cable routers with 5-3/4 inch sub bases. The center hole is 1-1/8 inch in diameter and accepts Porter-Cable template guides. It fits current and past models including 100, 690, 691, 693, 9690 and 693PK.

Porter-Cable 6911 D-Handle Base

The Porter-Cable 6911 is a D-Handle base. The D-handle base is compatible with Porter-Cable router motors # 6902 and 6912. The D-Handle base provides a comfortable grip and a trigger switch for easier operation.

Porter-Cable 43144PC 3/8 inch Core Box

Porter-Cable 43144PC 3/8 inch Core Box For Reeding, Fluting and General Ornamentation Especially effective in Fluting Flat Surfaces

Porter-Cable 43395PC 5/16 inch Diameter Arbor

The Porter-Cable 43395PC 5/16 inch Diameter Arbor. The arbor is used to make slots for "T" molding and weather stripping.

Porter-Cable 43147PC 3/4 inch Core Box

Porter-Cable 43147PC 3/4 inch Core Box For Reeding, Fluting and General Ornamentation Especially effective in Fluting Flat Surfaces

Porter-Cable 693LRPK 1-3/4 HP Router Kit Package Deal

Porter-Cable 59375 Strike and Latch Template

The Porter-Cable 59375 is a strike and latch template. It is easy to install doorknobs quickly with the Porter-Cable 59375 strike and latch template. With the template kit any 1/4 inch collet router can be used with the included bit to cut mortises.

Porter-Cable 42690 Precision Router Edge Guide

The Porter-Cable 42690 is a precision router edge guide. The edge guide is an accessory for Porter-Cable routers, model number 100, 690, 691 and 693. It features solid construction, with an anodized, extruded aluminum body for strength and durability. The dual sliding and lockable adjustment mounts quickly slide the edge guide to the general area needed.

Porter-Cable 43703PC 3/4-Inch Hinge Mortising Cutter

The Porter-Cable 43703PC Hinge Mortising Cutter is designed for mortising doors to accept locks, lock face plates, hinges, and for general stock removal. It fits all 1/4" to 28 threaded shanks for superior versatility. The 43703PC requires a shank sold separately for use (Porter-Cable models 43736 or 43737).

Porter-Cable 42950 1/2 inch Collet Assembly

The Porter-Cable 42950 is a 1/2 inch collet. The collet is for use with the Porter-Cable routers. The collet fits Porter-Cable router models 690, 690LR, 9690LR, 691, 693, 890, 891, 892, 7518, 7519, 7536, 7537, 7538, 7539. It has an auto-release design which keeps the collet captive in the collet nut so the collet is automatically released from the arbor as the collet nut is loosened.

Porter-Cable 42000 9-Piece Template Guide Kit

The Porter-Cable 42000 is a template guide kit. The template guide set is made of precision machine steel, ensuring it wont rust or harm the bit if hit. The kit contains template No. 42054, 42036, 42027, 42033, 42045, 42024, 42042 and two 42237 lock nuts. The set can be used with dovetail jigs, hinge butt jigs or just about any place user need to follow a pattern. The guide set will work with all Porter-Cable, DeWalt and Makita routers, as well as those equipped with a template guide adapter for use with Porter-Cable style templates.

Porter-Cable 43495PC 1/4 inch Tongue & Groove Assembly

The Porter-Cable 43495PC is a 1/4 inch tongue & groove assembly. The Porter-Cable 43495PC is designed to cut both tongues and grooves in 5/8 inch stock. The top cutter is removed to make the matching groove cut.

Porter-Cable 430S2PC Omnijig Joinery System Straight Bit - S2

The Porter Cable 430S2PC is an S2 Straight Bitfor the Omnijig Joinery System. The Porter Cable 430S2PC is 1 of 4 straight bits to be used with the Omnijig Joinery System. It isused to cut all standard-sized through dovetails.

Porter-Cable 380B120 Bearing Kit Router Bit

The Porter-Cable 380B120 is a Bearing Kit for Router Bits. The kit allows to vary the depth of rabbeting bits or convert regular bits into top-bearing pattern or lettering bits.

Porter-Cable 42188 Router Sub-Base

The Porter-Cable 42188 is a router sub-base. The Porter-Cable sub-base, with its extra large, 2-1/2 inch center hole, allows the use of larger diameter bits than a standard sub base. It is constructed of clear plastic, providing better visibility. The sub-base installs easily, using existing screws from router base.

Porter-Cable 43529PC Ogee Horizontal Panel Raiser

The Porter-Cable 43529PC is a Ogee horizontal panel raiser. The Porter-Cable 43529PC professional edge router bits is constructed from 4140 alloy steel which is a harder grade of steel than standard cast steel bit bodies. The bit cuts an ogee raised panel profile on door panel inserts. It includes one carbide-tipped bit.

Porter-Cable 42160 Standard Router Edge Guide

The Porter-Cable 42160 is a standard router edge guide. The standard router edge guide uses the straight edge of the workpieces to guide the router for edge cuts, as well as inside cuts. Its easy to adjust, with simple thumbscrew clamps. It fits Porter-Cable routers, model number 100, 150, 350, 630, 670, 690, 693 and 691 (with Type 1 or 2 base). It comes included with the guide body, two rails and hardware.

Porter-Cable 5507 9/64 Pilot Hole Bit

The Porter-Cable 5507 is a 9/64 Pilot Hole Bit. The 5507 is a replacement pilot-hole drill bit for Porter-Cable's model 552 Production Pocket Cutter will make the fast-moving pocket cutter move even faster. A sharp, new pilot-hole bit helps to cut pilot and pocket holes in less than two seconds. The Production Pocket Cutter bit is ideal for drilling pilot holes in hardwood, softwood, high-pressure plastic laminate, particle board, MDF and melamine.

Porter-Cable 9690LR Factory Reconditioned 1-3/4 HP Router

The Porter-Cable 9690L is a Factory Reconditioned 1-3/4 Peak HP Router. The Porter-Cable 9690L has an 11 Amp motor which delivers 27500 RPM. It has auto-release collet system ends frozen bits. The Porter-Cable 9690L features a precision machined aluminum motor housing & base. The Porter-Cable 9690L has an accurate micrometer depth-of-cut adjustment to 1/128 inches.

Porter-Cable 43750PC 1/2 inch 14° Dovetail Router Bit

The Porter-Cable 43750PC is a 1/2 inch 14 Dovetail. The Router bit is designed for routing smooth dovetail joints.

Porter-Cable FLC150 1-1/2 inch Flooring Cleat Nails (1000-Pack)

Porter-Cable FLC150 contains L-shaped 1-1/2 inch flooring cleat nails. It includes 1000 nails in a single box.

Porter-Cable FLC200 2 inch Flooring Cleat Nails (1000-Pack)

Porter-Cable FLC200 contains L-shaped 2 inch flooring cleat nails. It includes 1000 nails in a single box.

Porter-Cable 505 Half Sheet Finishing Sander

The Porter-Cable 505 1/2 Sheet Finishing Sander as a all-metal housing and trigger for reduced vibration and long trouble-free tool life. It operates at 10000 OPM. A direct drive motor to pad design for smooth, fast finishing.

Porter-Cable 42700 Precision Router Edge Guide

The Porter-Cable 42700 is a precision router edge guide. The edge guide features solid construction, with an anodized, extruded aluminum body for strength and durability. The dual sliding and lockable adjustment mounts quickly slide the edge guide to the general area needed. It features quick and accurate operation.

Porter-Cable 75301 Router Motor Height Adjuster

The Porter-Cable 75301 is a router motor height adjuster. The adjuster is inserted through one hole in the table and the clamp is unlocked. It is then inserted through the other hole and the height is adjusted, while watching the calibrated dial rotate on the table. The clamp is then locked at the first hole.

Porter-Cable 511 Cylindrical Lock Boring Jig

The Porter-Cable 511 is a Cylindrical Lock Boring Jig. The jig locates for 2-3/8-inch or 2-3/4-inch basket in seconds. It is easily adjustable for door thickness from 1-5/16 to 2-1/8 inches. All holes are drilled in one setup. It includes strike locator for accurate placement of jamb mortise.

Porter-Cable 43308PC Dado & Planer Router Bit

The Porter-Cable 43308PC is a Dado & Planer Router Bit. It is used to clean dadoes and rout signs. The bit puts a ready-for-sanding finish on rough stock. It can be used to strip large, flat areas of thick, old paint or varnish.

Porter-Cable 59381 Hinge Butt Template Kit

The Porter-Cable 59381 is a Hinge Butt Template Kit. The hinge butt template is easy to operate and permits mortising of a door and jamb from 78 to 84 inches long. It assures perfect matching of hinge locations on door and jamb. The hinge template can be adjusted for cutting 3- to 6 inches mortises for common hinge sizes.

Porter-Cable PCRBS03 3-Pc Laminate Trim Set ******

The Porter-Cable PCRBS03 3-Pc Laminate Trim Set. The set includes 1/4 inch straight bit, 1/4 inch flush trimmer with bearing and 23 bevel trimmer with bearings in a wooden display case. These bits are ideal for finish contractors, woodworkers, hobbyists and craftspersons.

Porter Cable 55160 16-Inch Omnijig Joinery System

Porter Cable 55160 is a 16-Inch Omnijig Joinery System. 55160 has a template which is used for rabbeted half-blind and sliding-tapered dovetails. Set & Forget template alignment stops and router bit depth gauges combine to minimize test cuts and offer repeatability across changing applications. Router bit depth gauges allow the user to set bit depth without measuring. Versatile system in Porter Cable 55160 also allows for variable-spaced half-blind and through dovetails, miniature dovetails and box joints with additional accessories sold separately. Component storage cases and dust hoods are also available as accessories (sold separately).

Porter-Cable 43190PC 45° Chamfer Router Bit

The Porter-Cable 43190PC is a 45° Chamfer Router Bit with 1/4 inch Shank size. The Porter-Cable Professional Edge router bit is constructed of 4140 Alloy Steel, a harder grade of steel than standard cast steel bit bodies. Each bit is annealed and heat treated to Rockwell hardness of 40-45 harder than is possible with cast steel bodies. The bit is precisely ground using computer controlled machining for precision tolerances and perfectly concentric shafts. The carbide tip is made from specially blended micro grain carbide for superior results and long lasting sharpness.

Porter-Cable 5563 Face Frame Biscuits (175-Pack)

The Porter-Cable 5563 is a pack of 175 Face Frame Biscuits. It can join material as narrow as 1-1/2 inch. The standard size 0 biscuits are too long for use in 1-1/2 inch stock. With Porter-Cables 557 Deluxe Plate Joiner and these FF biscuits, narrow stock can be joined quickly and easily. At 5/32 inch thick, they are as thick as standard biscuits and provide plenty of strength for typical face frame construction. The re-sealable tube protects biscuits from moisture to prevent swelling. The Face Frame Biscuits are for use only with the Porter-Cable 557 Deluxe Plate Joiner and 2 inch blade.

Porter-Cable 43072PC 45° Chamfer Router Bit

The Porter-Cable 43072PC is a 45° Chamfer Router Bit. The 43072PC bit is used for 45° bevel cutting. The router bit has a lower depth setting which results in chamfer with fillet. The 43072PC has a Pozi-Stop Shank which automatically locates the bit at the correct height in the collet. This makes switching between bits fast and easy. The Pozi-Stop Shank creates a strong and long lasting bit. The Porter-Cable 43072PC bit includes a Monster Carbide which is 40% thicker carbide than standard bits. This generates less friction and provides smoother cuts.

Porter-Cable 690LR Factory Reconditioned 1-3/4 HP Fixed Base Router

The Porter-Cable 690LR is a Factory Reconditioned 1-3/4 Peak HP Router. The Porter-Cable 690LR features an increased horsepower up to 1-3/4 and the incorporation of new one-handed lever-release height adjustment. The new mechanism is extremely beneficial in router table applications where the space is limited.

Porter-Cable 43581PC 3/16 inch Beading Router Bit

The Porter-Cable 43581PC is a Ball Bearing Pilot Beading Router Bit. The Porter-Cable 43581PC is a carbide tipped bit. The carbide tip is made from specially blended micro grain carbide for superior results and long lasting sharpness.

Porter-Cable 43402PC 1/4 inch Roundover Router Bit

The Porter-Cable 43402PC is a 1/4 inch Roundover Router Bit. The 43402PC router bit is designed for making smooth and uniformly rounded edges on the furniture. The Porter-Cable roundover router bit has a unique feature of lower depth setting which results in rounded corner with decorative fillet.

Porter-Cable 43431PC 7/8 inch Roundover Router Bit

The Porter-Cable 43431PC is a 7/8 inch Roundover Routing Bit. The 43431PC router bit is designed for making smooth and uniformly rounded edges on the furniture. The Porter-Cable roundover router bit has a unique feature of lower depth setting which results in rounded corner with decorative fillet.

Porter-Cable 430D5PC Omnijig Joinery System Dovetail Bit - D5

The Porter Cable 430D5PC is a D5 Dovetail Bit for the Omnijig Joinery System. The Porter Cable 430D5PC is 1 of 7 dovetail bits to be used with the Omnijig Joinery System. It is used to cut standard through dovetails on up to 1 thick wood. The angle is set to 7 to enable user to replicate traditional, hand cut dovetail joints.