Outdoor Tools tools and information

Find Outdoor Tools at best prices and buy!

Denver Tools 502 150mm Air Hammer

The Denver Tools 502 is a 150mm Air Hammer which comes with 4 chisels.

Denver Tools 93486 Mini Grease Gun

The Denver Tools 93486 is a Mini Grease Gun. This small, one-hand operated grease gun is perfect for greasing in tight spaces.

Denver Tools RM016 16 oz Rubber Mallet

The Denver Tools RM016 is a 16 oz Rubber Mallet. This mallet features a double-faced rubber head with a rubber gripped handle.

Denver Tools 653A 3/8-Inch In-line Air Drill

The Denver Tools 653A is a 3/8-Inch In-line Air Drill with variable speed. This small drill makes drilling in tight spaces easy.

Denver Tools 95439 Air Control Unit

The Denver Tools 95439 is an Air Control Unit. This air control unit consists of an air filter, air regulator and an oiler. It helps prevent costly damage to your air tools caused by rust, scale and moisture. It provides clean, dry, regulated air over a wide range of air flows. It is easy to install and maintain.

Spring Tools PPM503 Medium Pin Punch Set

Spring Tools PPM503 is a Medium Pin Punch Set. Pin punch sets are a must for every mechanics tool box. The tools are crafted with professional mechanics grade hardened steel and are ideal for removing pins in difficult to reach areas. Designed to remove drift pins, roll pins, clevis pins, spring pins and others.

Denver Tools ABG2 Air Blow Gun

The Denver Tools ABG2 is an Air Blow Gun featuring a comfortable vinyl coated control lever and durable chrome plated zince cast body.

Denver Tools AR2 Brass Air Regulator with Gauge

The Denver Tools AR2 is a Brass Air Regulator with Gauge. This regulator and guage allow you to monitor and control the air flow and pressure of your compressor.

Denver Tools DHTCZ-1 Zine Dual Head Tire Chuck

The Denver Tools DHTCZ-1 is a Zine Dual Head Tire Chuck for inflating tires.

Denver Tools 811B 1/4-Inch Air Die Grinder

The Denver Tools 811B is a 1/4-Inch Air Die Grinder. This powerful air die grinder is compact and lightweight making it easy to use for most grinding, deburring and polishing applications.

Denver Tools 94346 Mini Air Line Filter

The Denver Tools 94346 is a Mini Air Line Filter. This 40 micron particle filter can operate at up to 135 PSI and 140 degrees Fahrenheit. The reservoir of this filter is made of durable polycarbonate and features a push style drain.

Denver Tools TC1 Air Brass Tire Chuck

The Denver Tools TC1 is a Air Brass Tire Chuck. This solid brass air chuck has a standard 1/4-Inch NPT fitting and can be used to inflate various types of tires.

Denver Tools ABK2 Professional Air Brush Kit

The Denver Tools ABK2 is a Professional Air Brush Kit. This kit includes everything needed for painting model cars, trains and art detail projects, stenciling, stippling, base coats and much more.

Denver Tools QC1 5-Piece Brass Quick Coupler Set

The Denver Tools QC1 is a 5-piece set of quick couplers.  These durable brass couplers allow you to easily and quickly connect your air tools to an air hose.

K-D Tools KD 2428 Compression Tester

The K-D Tools KD 2428 is Compression Tester. It checks cylinder compression from 0 to 300 PSI (0 to 21kg/cm2). Adapters fit 14 mm and 18 mm spark plug holes and special air-hold valve is included to reset gauge easily. It is a serviceable product.

K-D Tools 298 Brake Spring Pliers

The K-D Tools 298 is a Brake Spring Plier. The tool easily removes and installs shoe return springs on most drum brakes. Socket end removes spring from anchor stud and notched end installs spring on anchor. It is chrome plated to resist rust and provides easy cleanup.

K-D Tools 2038 Window Moulding Remover

The K-D Tools 2038 is a Window Moulding Remover. It removes window molding clips on GM, Ford and AMC vehicles. To remove the window moulding, jaw has to be placed flat against glass. Locate clips and roll them out with tip, keeping jaw flat to glass.

K-D Tools KD 2043 Tapered Reamer

The K-D Tools KD 2043 is Tapered Reamer. This tool reams as well as deburs, aligns and enlarges holes from 1/8 to 1/2. It accurately grounds tempered steel with 3-1/2 blade. It turns clockwise and use cutting oil for best results. Reamer comes with a comfortable plastic-grip handle.

Denver Tools 19212810 1/2-Inch Electric Impact Wrench

The Denver Tools 12810 is a 1/2-Inch Heavy Duty Industrial Electric Impact Wrench. The 19212810 Electric Impact Wrench has a reversiable 7.5amp moter and rugged die cast aluminum gear housing. A rocker trigger allows for easy one-hand operation.

Denver Tools 417002 3/8-Inch Electric Angle Drill

The Denver Tools 417002 is a 3/8-Inch Electric Angle Drill. This reversible drill features an easy to operate pull on/off paddle switch and a locking mechanism for continuous rotation. The ergonomic design and 55 degree angled chuck this drill easy to use in confined working areas.

K-D Tools KD 3804 Cable Hose Clamp Tip

The K-D Tools KD 3804 is a Cable Hose Clamp Tip. This tip can be use with gear plier system.

Denver Tools 610002 4 Ton Hydraulic Bottle Jack

The Denver Tools 610002 is a 4 Ton Hydraulic Bottle Jack. This compact jack is durable and easy to use.

Denver Tools 610001 2 Ton Hydraulic Bottle Jack

The Denver Tools 610001 is a 2 Ton Hydraulic Bottle Jack. This compact jack is durable and easy to use.

Denver Tools MSS10 5 Piece 1/8-Inch Die Grinding Stone Set

The Denver Tools MSS10 is a 5 Piece 1/8-Inch Die Grinding Stone Set with 5 assorted mounted grinding stones.

Denver Tools 610003 6 Ton Hydraulic Bottle Jack

The Denver Tools 610003 is a 6 Ton Hydraulic Bottle Jack. This compact jack is durable and easy to use.

Denver Tools MSS101 5 Piece 1/4-Inch Die Grinding Stone Set

The Denver Tools MSS101 is a 5 Piece 1/4-Inch Die Grinding Stone Set with 5 assorted mounted grinding stones.

K-D Tools 2286 Harmonic Balancer Puller

The K-D Tools 2286 is a Harmonic Balancer Puller. The puller removes balancers, pulleys and gears with tapped holes. A floating swivel prevents damage to the shaft end. Four slots in the yoke allow for 2- or 3-hole applications. It has tool bolts to balancer with center screw on the end of the crankshaft. Tighten while tapping on the screw head to remove balancer. Puller includes 3/8-24 UNF, 5/16-18 UNC, 3/8-16 UNC and 10 mm x 1.5 screws for most American and imported cars.

Denver Tools 613002 2 Ton Engine Crane

The Denver Tools 613002 is a 2 Ton Engine Crane. This engine crane has four settings for half ton, full ton, one and a half ton and two ton loads and features a hydraulic action pump for easy lifting. The legs and easily fold up into the body for easy storage and four caster wheels are attached to the bottom of the main body so it can easily be rolled away.

Spring Tools IPTS108 Impact Driver Set

Spring Tools IPTS108 is an Impact Driver Set. Combination impact tool and screwdriver for re-coining damaged, corroded or rusty fastener heads, and removing sticky, unmovable rusted fasteners or corroded threads. Pull back the ball holding the high tension spring, striking the fastener head, causing up to 5,000 lbs of impact on the fastener head - then use as screwdriver to remove fastener.

Delta 50-274 Mobile Base for Delta Tools

The Delta 50-274 is a mobile base for delta tools. Delta mobile base provides stationary machines with increased mobility for positioning them at any place, whether its across the shop or out-of-the-way for convenient storage. Delta mobile bases are made of heavy-gage steel and feature a foot-operated control lever that raises and lowers the base for easy movement and positioning.

K-D Tools KD 2289 Pitman Arm Puller

The K-D Tools KD 2289 is a Pitman Arm Puller. It removes full-size pitman arms. While using it, jaws are mounted over pitman arm and center screw is turned with wrench until tight. To release pitman arm center screw is striked with hammer. No Other tools are needed.

K-D Tools KD 9308 8-Piece SAE Combination GearWrench Set

The K-D Tools KD 9308 is a 8-Piece SAE Combination GearWrench Set. This ratcheting set needs as little as 5 to move fastener.

K-D Tools KD 9312 13-Piece SAE Combination GearWrench Set

The K-D Tools KD 9312 is a 13-Piece SAE Combination GearWrench Set. This ratcheting set needs as little as 5 to move fastener.

K-D Tools KD 9309 4-Piece SAE Combination GearWrench Set

The K-D Tools KD 9309 is a 4-Piece SAE Combination GearWrench Set. This ratcheting set needs as little as 5 to move fastener.

Denver Tools AHPE02 1/4-Inch x 50-Foot Recoil Air Hose

The Denver Tools AHPE02 is a 1/4-Inch x 50-Foot Recoil Air Hose. This self storing air hose snaps back into shape just like a telephone cord.

Denver Tools A280 Air Flow Regulator with Pressure Gauge

The Denver Tools A280 is an Air Flow Regulator with Pressure Gauge. This regulator and guage allow you to monitor and control the air flow and pressure of your compressor.

Denver Tools ABG5 24-Inch Professional Air Blow Gun

The Denver Tools ABG5 is a 24-Inch Professional Air Blow Gun. This air gun included a rubber tip as well as a 24-Inch wand attachment.

Denver Tools ABG3 5 Piece Air Blow Gun Kit

The Denver Tools ABG3 is a 5 Piece Air Blow Gun Kit. This kit comes with a nickel plated brass body air gun and four assorted tips.

Denver Tools AHPE01 1/4-Inch x 25-Foot Recoil Air Hose

The Denver Tools AHPE01 is a 1/4-Inch x 25-Foot Recoil Air Hose. This self storing air hose snaps back into shape just like a telephone cord.

Delta 46-671 Wood Lathe Micro Turning Tools - Set of 5

The Delta 46-671 is a set of 5 Micro Wood Turning Tools for Wood Lathes. These micro turning tools are built for durability with top quality high-speed steel blades and ash handles. The small size makes them appropriate for a variety of miniature turnings and detail work. They are individually hardness tested to guarantee edge retention. The set includes five basic tools for a variety of miniature turning applications.

Kreg Tools 18Inch Face Clamp

Also ideal for joining flat stock, such as face frames, mitered picture framesEnsures a perfectly flush joint every time for tighter workpiecesKeeps workpieces aligned for precise screw drivingLarge pad keeps clamp from marring the wood for a finer outcomeProduces ultra-flush joints for less sanding

Kreg Tools KBK Bench Clamp

360 degree pivoting clamping stationRemovable clampflexible clamping systemHold down clamp for pocket hole joinery and many other applications

Spring Tools AMA996 Automotive and Metalworking Set

Spring Tools AMA996 is an Automotive and Metalworking Set. High speed steel center punch hardened to RC65 for precision marking on hardened steel surfaces. High temper steel tip can be re-sharpened without loss of hardness. This tool is ideal for removing rivit bodies 5/16-Inch cold chisel is designed to remove metal burrs, rivets, screw & nail heads, peening welds and other metal protrusions. Also great for notching sheet metal and other light materials. Outstanding tool for working in hard to reach areas, the self centering center punch tool is ideal for mounting brackets, hinges and other hardware to metal surfaces. Center punch is ideal for marking wood or steel for drilling.

K-D Tools KD 3680 GearWrench Serpentine Belt Tool

The K-D Tools KD 3680 is a GearWrench Serpentine Belt Tool. This tool has ratcheting gearforce technology which provides exceptional access and ease of use. It comes with blow molded storage case.

K-D Tools KD 850 Piston Ring Compressor Set

The K-D Tools KD 850 is a Piston Ring Compressor Set. This set is used to install pistons from 2-7/8 to 4-3/8 (73 to 111 mm). Its pliers can be used parallel or perpendicular to the cylinder block.

K-D Tools KD 2833 Engine Cylinder Hone

The K-D Tools KD 2833 is an Engine Cylinder Hone. It hones and removes glaze from engine cylinders from 2 to 7 (51 to 177 mm) in diameter.

K-D Tools KD 2521 Fuel Pump Vacuum and Pressure Tester

The K-D Tools KD 2521 is a Fuel Pump Vacuum and Pressure Tester. It test for fuel line pressure and vacuum leaks and check for leaky valves, timing, fuel pump vacuum and pressure and gas line leakage.

K-D Tools 135 Spark Plug Terminal Pliers

The K-D Tools 135 is a Spark Plug Terminal Plier. It is used for safely removing spark plug cables and prevents cable damage. Its handles and jaws are coated with a heavy-duty plastic for a sure grip.

K-D Tools KD 3472 Fan Clutch Wrench Set

The K-D Tools 3472 is a fan clutch wrench set. It is used to remove and replace thermostatic fan assemblies while eliminating the need for various size holding wrenches.

K-D Tools KD 3297 Universal Brake Bleeder Adapter

The K-D Tools KD 3297 is a Universal Brake Bleeder Adapter. It pressurizes plastic or metal reservoir brake systems on most late model domestic and import vehicles and light-duty trucks with single filler caps.

BEAUTIFUL BRICK HOME

Couldn't find Outdoor Toolshere? Are you looking for something else? Search our partner sites: