Machine Movers tools and information

Find Machine Movers at best prices and buy!

Flex LWW1506VR 1-1/4Inch Edge Milling Machine, 2200-6500 RPM, 11 Amps

The Flex LWW1506VR is a 1-1/4 Edge Milling Machine. It is the smaller sibling of the LWW 2106. The machine is designed to handle up to 1-1/4 thick slabs for milling and grinding sinks, kitchen tops, counters and tables. For use on both straight and curved edges. This unit should be operated only in conjunction with the GFCI operator protection circuit breaker.

Milwaukee 6180-20 14Inch Abrasive Cut-Off Machine

Powerful 5.4 max HP motor, 15 amp motor. 120 volts AC/DC. 3900 RPM. Completely tool-free - no tools required for adjusting the back fence or changing abrasive wheels Quick change abrasive wheel system and quick release and adjustable vise Tool-free adjustable back fence. Vise and back fence are 3/8 thick cast iron.Tool-less down stop easily adjusts to maintain maximum cutting capacity abd orevents cut-ff wheel from cutting into surface below the toolsPin style transport lock securely hold motor in down position when transporting toolBolt holes in base accomodate a standard 5/16 bolt to fasten machine permanently to work surfaceHeavy-duty cast aluminum base with a 1/4 reinforcing plate that provides additional support. Base height can easily turn a standard 2x4 into an extension bar to support longer stock.45 and 90 degree markings on base to easily set vise up for cuts for all three fence positionsHorizontal D-handle provides optimum comfort whether the tool is on the ground or on a benchLargest cutting capacity in class 14 wheel, 1 arbor. 45 deg. bevel capacity, 5-3/8 O.D. pipe capacity, 5 capacity in square stock. 8 maximum opening. Includes Saw and abrasive wheel

Jet 690036 JVM-836-1 Vertical Milling Machine, 1-1/2 HP, 1 Phase

The Jet 690036 JVM-836-1 Vertical Milling Machine has a precision bored and honed machine head. The large diameter quill is chrome finished. The spindle has high precision spindle bearings and includes a heavy duty spindle brake. There are over 10 of front to back ram travel. The head tilts left or right, with a graduated scale on the column. Included are precision hardened and ground ways and table. There are adjustable gibs throughout. There are locks on all movable surfaces and all the dials are satin chrome finished. The small mill has all the features found on Jets larger mills, but is sized for home shops, repair shops or small maintenance shops.

Jet 690038 JVM-836-3 Vertical Milling Machine, 1-1/2 HP, 3 Phase

The Jet 690038 JVM-836-3 Vertical Milling Machine has a precision bored and honed machine head. The large diameter quill is chrome finished. The spindle has high precision spindle bearings, and includes a heavy duty spindle brake. There are over 10 of front to back ram travel. The head tilts left or right, with a graduated scale on the column. Included are precision hardened and ground ways and table. There are adjustable gibs throughout. There are locks on all movable surfaces and all the dials are satin chrome finished. The small mill has all the features found on Jets larger mills, but is sized for home shops, repair shops or small maintenance shops.

Flex BSW2123 Core Drilling Machine, 450-2100 RPM, 17.6 Amps

The Flex BSW2123 is a Core Drilling Machine. The powerful drill has 17.6 Amp motor and infinitely adjustable speeds (450-2100 RPM). The central water intake directly cools core drill bit. Seals can be changed quickly from the outside. The combination shaft with two core drill bit attachments permits use of most core drill bits. It has mechanical 3-speed gearbox with optimum speed graduation.

Flex LP 1503 VR Set Burnishing Machine Kit

The FLEX LP 1503 VR Burnishing Machine for highly polished surfaces in the PRO Shadow-free and transition-free metal, wood, or plastic surfaces are its specialty. Its extensive FLEX accessories make it ideal for satin-finishing, polishing, descaling, smoothing, matting, structuring, brush polishing, and deburring. Start right up with the PROFI kit in the toolboxes; everything is on hand.

Flex LP1503VR Electronic Metal-Surface Finishing Machine, 9 Amps

The Flex LP1503VR is a burnishing machine for highly polished surfaces. The LP1503VR specializes in shadow-free, transitionless finishes on metal (stainless steel or aluminum), wood and, plastic surfaces. The electronic control and speed preselection over a broad RPM range lends the LP1503VR unique versatility. It is ideal for finishing, polishing, smoothing, dulling, graining, brushing and deburring, thanks to an extensive range of accessories (sold separately).

Delta 32-325 Industrial Line Boring Machine, 1725 RPM, 3/4 HP

The Delta 32-325 Industrial 13-spindle line boring machine contains 13 boring bits which drill holes simultaneously for production work. The indexing pins help maintain proper spacing between one group of holes and the next. A large 16 inch x 29-3/4 inch table provides ample support for longer work pieces. The adjustable fence assembly and work stops allow quick set up and accurate locating of holes for proper alignment. A 3/4 HP induction motor provides plenty of power for drilling in even the hardest of laminated composite woods. An adjustable depth stop assures drilling to the correct depth each time. For increased leverage, the lowering handle telescopes from 16 inch to 23 inch and retracts when not in use. The heavy-gauge steel base has pre-drilled holes for easy mounting to a bench or stand.

Kreg Tool DB55 Semi-Automatic Foreman Pocket Hole Machine

When your production needs have outpaced the manual Kreg Jigs, look for the added speed and convenience of the FOREMAN Pocket Hole Machine. The semi-automatic FOREMAN features a pneumatic drill motor and automatically adjusting air clamping cylinder. To operate, simply position your material to be drilled and pull the lever forward. This motion supplies air to the clamping cylinder that automatically adjusts to your material thickness as well as activates the 3/4 hp drill motor. Finish the drill stroke by continuing to pull on the lever and then return the lever to the home position to cut the air supply.Now with automatic oiler for pneumatic motorLever operated, 1 second cycle time3/4 hp pneumatic motor, automatic air clamping90-120 psi recommended - Minimum compressor cap. of 5.3 cfm @ 90 psi1/2 to 1-1/2 material capacity19 H x 13-5/8 W x 22-5/8D (35 lbs.)Tabletop height of 6-3/4Fast, semi-automatic operation; automatic hands-free clamping, quiet pneumatic drill motor with lever operated drill stroke.Reliable, one-step drilling operation; drills flat-bottom, round-sided pocket hole that can be plugged.Adjustability to handle 1/2 through 1-1/2 thick material.Stable work surface with easily adjustable swing-stop material positioning guides.Hinged-top that allows easy access to drill bit and motor.

Jet 690089 JTM-2 9Inch x 42Inch Table 8 Spindle Speeds Milling Machine, 2 HP, 115/230V

The Jet 690089 JTM-2 milling machine has a precision bored and honed machine head. The large diameter quill is chrome finished. The spindle head is internally cooled, has high precision class 7 spindle bearings, and includes a heavy duty spindle brake. The motor drive is splined with a one-piece quill pinion and shaft. The three-stage power downfeed with an automatic stop make this machine easy to work with. Included are precision hardened and ground ways and table. There are adjustable gibs throughout, and an internal coolant tank is built into the base for use with a coolant system (coolant pump not included). There are locks on all movable surfaces and all the dials are satin chrome finished. This step pulley milling machine is the perfect solution for maintenance shops, repair shops, job shops, schools and light production.

Jet 690082 JTM-1 9Inch x 42Inch Table 16 Spindle Speeds Milling Machine, 2 HP, 230V

The Jet 690082 JTM-1 milling machine has a precision bored and honed machine head. The large diameter quill is chrome finished. The spindle head is internally cooled, has high precision class 7 spindle bearings, and includes a heavy duty spindle brake. The motor drive is splined with a one-piece quill pinion and shaft. The three-stage power downfeed with an automatic stop make this machine easy to work with. Included are precision hardened and ground ways and table. There are adjustable gibs throughout, and an internal coolant tank is built into the base for use with a coolant system (coolant pump not included). There are locks on all movable surfaces and all the dials are satin chrome finished. This step pulley milling machine is the perfect solution for maintenance shops, repair shops, job shops, schools and light production.

Powermatic 1791302 CBM-21 Construction Line Boring Machine, 2.5 HP, 1 Phase, 230V

The Powermatic 1791302 is a Construction Line Boring Machine. The new single unit construction boring machine has all the features to do case goods and framework, furniture fittings and 32 mm line boring. The fully adjustable boring head can drill vertical or horizontal and will lock at any angle in between. The 2-1/2 HP motor provides plenty of power at 2800 RPM at the spindles. The hardened steel gears transmit power to the 21 spindles, assuring many years’ performance. A large table size of 35" x 20" offers generous support for the workpiece. With the 60" adjustable back fence, simply set any of the 4 flip stops provided for exact repetitive drilling every time. Twenty-one quick chucks also come standard, allowing hand removal of all bits for tool free, rapid set-ups. The unique flip down fences have built-in magnifiers for easy tape reading and stay attached to the machine, making it simple to change over from case goods to line drilling. A six position turret stop makes drilling depth adjustments simple. The clamp bar features a grip tite surface assuring pneumatic work hold downs stay in position.

Wilton 99174 2-1/2 Horsepower 14-Inch Abrasive Cut-Off Machine

This powerful 14" Chop Saw from Wilton delivers power from a robust 2-1/2hp ball bearing motor to make quick work of your cutting applications. The D-shaped handle helps increase comfort and accuracy while the adjustable fence adjusts for bevel cuts from 0 to 45 degrees. Quick lock/release vise for fast, easy clamping of any material. The external motor brushes allow for quick, easy servicing while the blade wrench stores on the unit base for convenience.

Powermatic 1791301 LBM-21 Line Boring Machine, 2.5 HP, 1 Phase, 230V

The Powermatic 1791301 is a Line Boring Machine. The 21 spindle line boring machine has everything needed to do 32 mm line boring. It’s ideal for drilling shelf supports, hinges, etc. The LBM21 features a powerful 2-1/2 HP motor that starts only when the pneumatic feed cycle is activated by the foot pedal, extending service life and saving power. The steel gears transmit plenty of power to the spindles at 2450 RPM. The large 20" x 28" table provides plenty of work support and slides on two tracks, keeping the fence parallel to the head at all times. A 60" fence with 4 flip stops locates material with precision. Two manual head mounted index pins provide precise positioning of longer stock.

Jet 350018 JMD-18 Milling/Drilling Machine for R-8 Taper, 2 HP, 1 Ph, 230V Only

With an extra-large worktable (9-1/2 by 31-3/4 inches), this milling/drilling machine features a hinged belt cover for faster speed changing and heavy-duty tapered roller bearings that support the spindle. The 2 hp, 1-phase, 230-volt motor gives it a range of 12 spindle speeds from 150 - 3,000 rpm. It has a drilling capacity of 1-1/4-inch, a 15-7/8-inch swing, with a 3-inch face mill capacity and a 3/4-inch end mill capacity. Other features include a positive and easy to read internal depth gauge and a 360 head swivel.

DeWalt D28755R Factory Reconditioned D28755 14-Inch Cut-Off Machine, 15 Amps

The DeWalt D28755 is a Factory Reconditioned Heavy-Duty 14 Cut-Off Machine. Its 15.0 amp/5.3 HP motor provides high power and speed for metal and concrete cutting. An epoxy-coated field and armature provide long service life against abrasion from debris. The rotation directs sparks and debris towards the front of the tool and helps prevent climbing in the cut. The D28755s dust duct provides access to dust extraction while cutting concrete. The soft start reduces reactionary torque during start up and dust sealed switch protects against dust ingestion for longer switch life.

Safety Speed Cut H10 Wheels for All Vertical SSC Panel Saw Models, DNA to SSC-EDGE, TR2, ES52, and WBS Lines

The Safety Speed Cut H10 Wheels allow the machine to be moved easily when in the completely upright position. When the machine is resting on either stand, wheels are disengaged and the machine will not move independently.

Safety Speed Cut WBS3760101 37-Inch x 60-Inch Wide Belt Sander, 10 HP, 1 Phase, 230V

The 3760 is a serious wide belt sander for the small woodworking shop. This machine packs most of the features of the larger Safety Speed Cut sanders into a lower cost machine.

Safety Speed Cut WBS3760153 37-Inch x 60-Inch Wide Belt Sander, 15 HP, 3 Phase, 230V

The 3760 is a serious wide belt sander for the small woodworking shop. This machine packs most of the features of the larger Safety Speed Cut sanders into a lower cost machine.

Powermatic 1791304 DT45 Single End Dovetailer, 18500 RPM

The Powermatic 1791304 DT45 Single End Dovetailer machine is used to cut dovetails for drawers and various furniture components. The machine is equipped with a router spindle which allows cutting dovetails of adjustable height. The DT45 can machine four types of dovetails with different pitches. Locking and unlocking of pieces takes place manually by an eccentric clamp.

Safety Speed Cut TR2 Horizontal Table Router, 3-1/4 HP, 1 Phase, 120V, 15 Amps

The TR2 horizontal table router is a productive machine for jobs that require 36 or less cross dado capacity. This machine has the ability to do standard dados, cut blind dados and rabbet dados. Easy one-person operation makes this machine work well for wood shops, schools, display manufactures and cabinet shops.

Safety Speed Cut AUTO1 Automater (all 1~ 120V machines)

Safety Speed Cut AUTO1 is an Automater for all 1 Phase, 120V machines. An Automater activates your vacuum as soon as you start your machine and shuts the vacuum off when the machine is turned off saving time and energy.

Safety Speed Cut 6820 Fixed Stand for the 6800

The Safety Speed Cut 6820 Fixed Stand allows the machine to free stand anywhere in your shop. The tripod design minimizes the effects of the most uneven shop floor while holding your machine at the optimum angle for stable material handling and cutting.

Safety Speed Cut 6420 Fixed Stand for the 6400 and 3400

The Safety Speed Cut 6420 Fixed Stand allows the machine to free stand anywhere in your shop. The tripod design minimizes the effects of the most uneven shop floor while holding your machine at the optimum angle for stable material handling and cutting.

Safety Speed Cut H23 Folding Stand for the C5 Panel Saw

The Safety Speed Cut H23 Folding Stand allows the C5 machine's frame to free stand independent in or outside of your shop. It folds to the back of the C5 Panel Saw's frame for easy storage and transport while allowing you to set up the machine at a work site or any location.

Safety Speed Cut 3420 Fixed Stand for the 3400

The Safety Speed Cut 3420 Fixed Stand allows the machine to free stand anywhere in your shop. The tripod design minimizes the effects of the most uneven shop floor while holding your machine at the optimum angle for stable material handling and cutting.

Safety Speed Cut SR20 Fixed Stand for the SR5 and SR5U

The Safety Speed Cut SR20 Fixed Stand allows the machine to free stand anywhere in your shop. The tripod design minimizes the effects of the most uneven shop floor while holding your machine at the optimum angle for stable material handling and cutting.

Safety Speed Cut H25 Fixed Stand for the H6

The Safety Speed Cut H25 Fixed Stand allows the machine to free stand anywhere in your shop. The tripod design minimizes the effects of the most uneven shop floor while holding your machine at the optimum angle for stable material handling and cutting.

Safety Speed Cut H20 Fixed Stand for C4, C5, H4 and H5

The Safety Speed Cut H20 Fixed Stand allows the machine to free stand anywhere in your shop. The tripod design minimizes the effects of the most uneven shop floor while holding your machine at the optimum angle for stable material handling and cutting.

Jet 660038 CK-38, Clamping Kit 52-Piece With Tray For 7/16-Inch And 1/2-Inch T-slot*******

The Jet 660038 52-piece clamping kit comes with metal storage tray can be mounted on a machine or wallStud size: 3/8"-16 T.P.I.

Mechanics M7104 3lb Cross Pein Hammer With Fiberglass Handle

Hammer features fiberglass handles which is water proof, shock absorbant, and will resist wear.The drop-forged machine heat treated steel head is made to last.Overall length is 14 inches.

Grip 29250 Non Slip Matting- 53Inch x 22-1/2Inch

New super friction soft vinyl-coating keeps tools in place when operning and closing drawers Trim with scissors to fit any shape Machine washable Includes (1) 53 x 22-1/2 mat

Delta 17-782 3/8Inch Mortising Chisel and Bit Set

Drills 3/8 square holes for making mortise and tenon jointsCenter drill bit removes material, hollow chisel squares off the sidesTwo-piece design for easy re-sharpeningFits Delta mortising attachments, mortising machine and other

Saw Trax FSTP96 96Inch Flip Stop

Perfect for use with longer sheets or where cutting exact lengths repetitively. Can be placed on either the right or left side of machine. Includes specialized 96 aluminum extrusion, tape and two stops.

Safety Speed Cut H6470 Midway Fence for H-Series, 6400, 6800 and 3400

The Safety Speed Cut H6470 is a Midway Fence for H-Series, 6400, 6800 and 3400. It brings your small panel work to waist height reducing back fatigue while cutting quantities of small panels on your machine. The Midway Fence system uses removable fence supports on both the left and right of the machine center. Included is a stop block riding over recessed gauges for setting stops for repeat cuts.

Safety Speed Cut WBASCALE Digital Readout for All Wide Belt Sander Models

The Safety Speed Cut WBASCALE Digital Readout is an optional addition for any of the Safety Speed Cut Wide Belt Sanders. This device digitally displays the height positioning of the belt sander allowing for more accurate sanding. Since this feature is added to the machine during the construction of the sander it can only be ordered with the purchase of a new Safety Speed Cut Wide Belt Sander, it cannot be added to an existing machine.

Safety Speed Cut C6470 Midway Fence for C4 and C5

The Safety Speed Cut C6470 is a Midway Fence for the C4 and C5 Panel Saws. It brings your small panel work to waist height reducing back fatigue while cutting quantities of small panels on your machine. The Midway Fence system uses removable fence supports on both the left and right of the machine center. Included is a stop block riding over recessed gauges for setting stops for repeat cuts.

Delta 50-760 1.5 HP 1200 CFM Dust Collector, 115V

Standard 1 micron filtration bagsSnap in bag rings eliminate need for cam-over-lock style clampsPowerful TEFC induction motor for long-lasting, smooth performance with protection from damaging dust6 mil plastic chip collection bagsSturdy steel base with four easy-gliding wheels for moving from machine to machine or for storing out of the way(2) 4 inch dust ports, or (1) 5 inch main portMotor housing can be mounted with dust ports facing up or down

Delta 50-765 5 HP 4800 CFM Single Stage Dust Collector, 230V

Standard 1 micron filtration bagsPowerful TEFC induction motor for long-lasting, smooth performance with protection from damaging dustSnap in bag rings eliminate need for cam-over-lock style clamps6 mil plastic chip collection bagsSturdy steel base with four easy-gliding wheels for moving from machine to machine or for storing out of the way(4) 5 inch dust ports or (1) 10 inch main portMotor housing can be mounted with dust ports facing up or down

Safety Speed Cut WBAHMETER Hour Meter for All Wide Belt Sander Models

The Safety Speed Cut WBAHMETER Hour Meter is an optional addition for the 4375 Model Wide Belt Sanders. This device has a dial display that allows you keep track of the usage of your belt sander. Since this feature is added to the machine during the construction of the sander it can only be ordered with the purchase of a new Safety Speed Cut Wide Belt Sander, it cannot be added to an existing machine.

Safety Speed Cut SR6480 Midway Fence Flip Stop Gauging System for SR5 and SR5U

The Safety Speed Cut SR6480 is a Midway Fence Flip Stop Gauging System for SR5 and SR5U. It brings your small panel work to waist height, reducing back fatigue while cutting quantities of small panels on your machine. The Midway Fence system uses removable fence supports on both the left and right of the machine center. Included is a stop block riding over recessed gauges for setting stops for repeat cuts.

Safety Speed Cut 3470 Midway Fence for 3400

The Safety Speed Cut 3470 is a Midway Fence for 3400. It brings your small panel work to waist height, reducing back fatigue while cutting quantities of small panels on your machine. The Midway Fence system uses removable fence supports on both the left and right of the machine center. Included is a stop block riding over recessed gauges for setting stops for repeat cuts.

Steel City 80100 Universal Mobile Base

-This universal mobile base will keep your shop machine mobile. Made of heavy-gauge steel, it can support up to 600 lbs and accommodate a 12 X 12 to 37 X 37 machine. The four mobile base corners come fully assembled. The only assembly required is to cut a sheet of 3/4 plywood to size and bolt it into the four corners of the universal mobile base.

Safety Speed Cut SRBU Dust Kit for the SR5U

The Safety Speed Cut Dust Collector allows you to efficiently remove most airborne dust particles and maintain a safer, cleaner working environment. For new machine purchases, select a dust kit that matches your model number. For previously purchased machines additional components are required.

Safety Speed Cut SRA Dust Kit with 1 HP Vacuum for the SR5 Old Style Panel Saws (2002 and Older)

The Safety Speed Cut SRA Dust Collector allows you to efficiently remove most airborne dust particles and maintain a safer, cleaner working environment. For new machine purchases, select a dust kit that matches your model number. For previously purchased machines additional components are required.

Safety Speed Cut 340AA Dust Kit with 2.25 HP Vacuum for the 3400 Panel Saw

The Safety Speed Cut 340AA Dust Collector allows you to efficiently remove most airborne dust particles and maintain a safer, cleaner working environment. For new machine purchases, select a dust kit that matches your model number. For previously purchased machines additional components are required.

Safety Speed Cut 640A Dust Kit with 1 HP Vacuum for the 6400 and 6800

The Safety Speed Cut 640A Dust Collector allows you to efficiently remove most airborne dust particles and maintain a safer, cleaner working environment. For new machine purchases, select a dust kit that matches your model number. For previously purchased machines additional components are required.

Safety Speed Cut H456A-1 Dust Kit with 1 HP Vacuum for the H-Series, C4 and C5 New Style Panel Saws (2002 - 4/2008)

The Safety Speed Cut H456A-1 Dust Collector allows you to efficiently remove most airborne dust particles and maintain a safer, cleaner working environment. For new machine purchases, select a dust kit that matches your model number. For previously purchased machines additional components are required.

Saw Trax STWH Folding Stand and Wheels

Stand can be folded from the front, like a ladder Pre-attached at the factory when ordered Cross braces give added support Machine can be tilted forward and moved on two large 5 wheels Standard on Varsity, 1000, 2000, 3000 Series

Grip 57560 16Inch Groove Joint Pliers

Drop forged, heat treated steel carbon steel with a machine finish Fully polished chrome finish with high visibility handles Rib & groove design locks jaws securely in place for a non-slip grip Laquer coated to resist rust and corrosion Jaw teeth are broached for maximum depth and gripping action 16 long

walk the museum

Couldn't find Machine Movershere? Are you looking for something else? Search our partner sites: