Lift Equipment tools and information

Find Lift Equipment at best prices and buy!

AO Safety 94051 Aerial/Lift Fall Protection Kit with Safewaze

The AO Safety 94051 is an Aerial/Lift Fall Protection Kit. The AO Safety 94051 has a 5-point universal harness and a 6-foot low-profile shock lanyard with storage bag. It is a simple solution to protect workers on suspended surfaces. It can be used for when workers anchor to a fixed point and need to work in one area such as with equipment maintenance, warehouse lifts or other similar uses.

Jessem 03003 9-1/4Inch x 11-3/4Inch Template for Mast-R-Lift or Mast-R-Plate

The Jessem 03003 is a 9-1/4 x 11-3/4 Template For Mast-R-Lift or Mast-R-Plate. This is used to rout the insert hole for Rout-R-plate, Rout-R-Lift Fx, Mast-R-Plate, or Mast-R-Lift when installing in custom table top.

Bench Dog 40-016 ProLift (Max) Router Lift System

Bench Dog 40-016 is Bench Dogs new cast iron top-adjust router system for fixed base routers. ProLift gives easiest bit changes and the ability to zero-out and accurately set bit height. The heavy duty ProLift Nis core is a cast-iron motor housing, finned for cooling, with bronze bushings that adjust up and down on two hardened steel columns, guided by an 8 t.p.i. acme threaded shaft. This core is anchored to a 3/8-inch thick, cast iron, hard chrome plate that accepts three supplied steel insert rings (2-, 2.625- and 3.75-inch i.d.) and one supplied threaded insert pin. The insert pin mounts at four locations for freehand work. ProLift Ni is designed to accommodate for the largest routers and is built to last a lifetime.

Bench Dog 40-002 Adapter -ProLift/ProLift Ni 4.2Inch Lift to 3.5Inch Router Motor

Bench Dog 40-002 is an adapter for 3.5 diameter fixed base routers. For use with Porter Cable 690, Bosch 1617 and 1618, and for DeWalt 610, 616 and 618 Routers.

Powermatic 1792001K Model PM2000 10-Inch Table Saw with 50-Inch Accu-Fence System and Rout-R-Lift, 3 HP, 230V, 1 Phase

Powermatic 1792001K Model 2000 Table Saw is a 3HP 1ph 230V saw with a 50 ACCU-FENCE. It is a left tilting saw with an arbor lock that allows faster and safer blade changes using only one wrench. The saw also comes with a Riving knive with a quick release for consistently safer cuts. A big difference in this cabinet saw compared to others is the cast iron base that provides a more stable foundation and the integrated retractable casters which eliminate the need for an optional mobile base.

Milwaukee 9676-20 2 Ton, 20' Chain Hoist

2 ton rated capacity, 20 ft. standard lift Chain pull to lift rated load 82 lbs. Feet of chain overhauled to lift load one foot 80 ft. Equipped with hardened load chain for flexibility and long wear Wheel cover with guide slots minimizes jamming and slipping These Hand Chain Hoists from Milwaukee are equipped with hardened load chain for flexibility and long wear

Grip 44182 20-Ton Bottle Jack with Case

Built-in release valve for lowering Trouble free design Forged steel load rests help prevent slipping 9-1/2 to 18-7/8 lift range. 20 ton weight capacity. Includes blow molded storage case

Grip 18095 2-Ton Rope Pulley Hoist

Rugged 2.5 nylon pulley, with 12-foot long ropeBlock and tackle mechanism made of nylon rollers and rust proof cadmium plated housing2 Ton Lift Capacity71 Ratio

Bessey BCRB Bessey Reco Induction Bearing Heater Raising Blocks for BC/BC Special (pair)

-Bessey Reco+D20 Induction Bearing Heater Raising Blocks for BC/BC Special (pair) Raising Blocks (sold in pairs) lift bearing heater crossbar for use with larger diameter bearings.

Bessey SCRB Bessey Reco Induction Bearing Heater Raising Blocks for SC (pair)

-Bessey Reco Induction Bearing Heater Raising Blocks for SC (pair). Raising Blocks (sold in pairs) lift bearing heater crossbar for use with larger diameter bearings.

Stack-On® PY23 23in Pro Tool Box

Large sure-grip handle.Extra deep bottom storage area.Extra high lid for increased storage capacity.Bottom feet keep box clean and dry.Deluxe, lift-out tote tray.Fully lockable.

Chicago Pneumatic CP5000 1-Inch Super-Duty Extended Anvil Air Impact Wrench, 11.88 CFM

-Four position power regulator -Controllable throttle provides easy bolt starting -7 extended anvil for easy access to heavy equipment tires -Easy to use forward/reverse valve for quick directional changes -Ideal for high volume tire work on trucks, buses and heavy equipment

Woods 6927 1060J 6-Outlet 4-Foot Surge Protector Strip

The Woods 6927 is a 1060J 6-outlet 4 ft. surge protector strip. It protects valuable equipment from dangerous spikes and energy surges.

Milwaukee 9683-20 3/4 Ton, 10' Lever Hoist

3/4 ton rated capacity, 10 ft. standard lift Chain pull to lift rated load 44 lbs. Weston-type automatic braking system for positive load control Steel chain guide roller and chain stripper for smooth chain feed Strong steel construction and light weight make the Milwaukee line of Lever Hoists a good choice for any application

Milwaukee 9671-20 1 Ton, 15' Chain Hoist

1 ton rated capacity, 15 ft. standard liftChain pull to lift rated load 77 lbs. Feet of chain overhauled to lift load one foot 37 ft.Equipped with hardened load chain for flexibility and long wearWheel cover with guide slots minimizes jamming and slippingThese Hand Chain Hoists from Milwaukee are equipped with hardened load chain for flexibility and long wear

Milwaukee 9685-20 1-1/2 Ton, 5' Lever Hoist

1-1/2 ton rated capacity, 5 ft. standard lift Chain pull to lift rated load 54 lbs. Weston-type automatic braking system for positive load control Steel chain guide roller and chain stripper for smooth chain feed Strong steel construction and light weight make the Milwaukee line of Lever Hoists a good choice for any application

Milwaukee 9689-20 3 Ton, 5' Lever Hoist

3 ton rated capacity, 5 ft. standard lift Chain pull to lift rated load 61 lbs. Weston-type automatic braking system for positive load control Steel chain guide roller and chain stripper for smooth chain feed Strong steel construction and light weight make the Milwaukee line of Lever Hoists a good choice for any application

Milwaukee 9684-20 3/4 Ton, 20' Lever Hoist

3/4 ton rated capacity, 20 ft. standard lift Chain pull to lift rated load 44 lbs. Weston-type automatic braking system for positive load control Steel chain guide roller and chain stripper for smooth chain feed Strong steel construction and light weight make the Milwaukee line of Lever Hoists a good choice for any application

Milwaukee 9680-20 5 Ton, 8' Chain Hoist

5 ton rated capacity, 8 ft. standard liftChain pull to lift rated load 105 lbs. Feet of chain overhauled to lift load one foot 147 ft.Equipped with hardened load chain for flexibility and long wearWheel cover with guide slots minimizes jamming and slippingThese Hand Chain Hoists from Milwaukee are equipped with hardened load chain for flexibility and long wear

Milwaukee 9690-20 3 Ton, 10' Lever Hoist

3 ton rated capacity, 10 ft. standard lift Chain pull to lift rated load 61 lbs. Weston-type automatic braking system for positive load control Steel chain guide roller and chain stripper for smooth chain feed Strong steel construction and light weight make the Milwaukee line of Lever Hoists a good choice for any application

Milwaukee 9669-20 1/2 Ton, 20' Chain Hoist

1/2 ton rated capacity, 20 ft. standard liftChain pull to lift rated load 53 lbs. Feet of chain overhauled to lift load one foot 29 ft.Equipped with hardened load chain for flexibility and long wearWheel cover with guide slots minimizes jamming and slippingThese Hand Chain Hoists from Milwaukee are equipped with hardened load chain for flexibility and long wear

Milwaukee 9686-20 1-1/2 Ton, 10' Lever Hoist

1-1/2 ton rated capacity, 10 ft. standard lift Chain pull to lift rated load 54 lbs. Weston-type automatic braking system for positive load control Steel chain guide roller and chain stripper for smooth chain feed Strong steel construction and light weight make the Milwaukee line of Lever Hoists a good choice for any application

Milwaukee 9677-20 3 Ton, 8' Chain Hoist

3 ton rated capacity, 8 ft. standard liftChain pull to lift rated load 65 lbs. Feet of chain overhauled to lift load one foot 154 ft.Equipped with hardened load chain for flexibility and long wearWheel cover with guide slots minimizes jamming and slippingThese Hand Chain Hoists from Milwaukee are equipped with hardened load chain for flexibility and long wear

Milwaukee 9673-20 1 Ton, 25' Chain Hoist

1 ton rated capacity, 25 ft. standard liftChain pull to lift rated load 77 lbs. Feet of chain overhauled to lift load one foot 37 ft.Equipped with hardened load chain for flexibility and long wearWheel cover with guide slots minimizes jamming and slippingThese Hand Chain Hoists from Milwaukee are equipped with hardened load chain for flexibility and long wear

Milwaukee 9667-20 1/2 Ton, 8' Chain Hoist

1/2 ton rated capacity, 8 ft. standard liftChain pull to lift rated load 53 lbs. Feet of chain overhauled to lift load one foot 29 ft.Equipped with hardened load chain for flexibility and long wearWheel cover with guide slots minimizes jamming and slippingThese Hand Chain Hoists from Milwaukee are equipped with hardened load chain for flexibility and long wear

Milwaukee 9668-20 1/2 Ton, 15' Chain Hoist

1/2 ton rated capacity, 15 ft. standard liftChain pull to lift rated load 53 lbs. Feet of chain overhauled to lift load one foot 29 ft.Equipped with hardened load chain for flexibility and long wearWheel cover with guide slots minimizes jamming and slippingThese Hand Chain Hoists from Milwaukee are equipped with hardened load chain for flexibility and long wear

Milwaukee 9681-20 5 Ton, 20' Chain Hoist

5 ton rated capacity, 20 ft. standard liftChain pull to lift rated load 105 lbs. Feet of chain overhauled to lift load one foot 147 ft.Equipped with hardened load chain for flexibility and long wearWheel cover with guide slots minimizes jamming and slippingThese Hand Chain Hoists from Milwaukee are equipped with hardened load chain for flexibility and long wear

Milwaukee 9687-20 1-1/2 Ton, 20' Lever Hoist

1-1/2 ton rated capacity, 20 ft. standard lift Chain pull to lift rated load 54 lbs. Weston-type automatic braking system for positive load control Steel chain guide roller and chain stripper for smooth chain feed Strong steel construction and light weight make the Milwaukee line of Lever Hoists a good choice for any application

Milwaukee 9670-20 1 Ton, 8' Chain Hoist

1 ton rated capacity, 8 ft. standard liftChain pull to lift rated load 77 lbs. Feet of chain overhauled to lift load one foot 37 ft.Equipped with hardened load chain for flexibility and long wearWheel cover with guide slots minimizes jamming and slippingThese Hand Chain Hoists from Milwaukee are equipped with hardened load chain for flexibility and long wear

Milwaukee 9675-20 2 Ton, 15' Chain Hoist

2 ton rated capacity, 15 ft. standard liftChain pull to lift rated load 82 lbs. Feet of chain overhauled to lift load one foot 80 ft.Equipped with hardened load chain for flexibility and long wearWheel cover with guide slots minimizes jamming and slippingThese Hand Chain Hoists from Milwaukee are equipped with hardened load chain for flexibility and long wear

Milwaukee 9678-20 3 Ton, 15' Chain Hoist

3 ton rated capacity, 15 ft. standard liftChain pull to lift rated load 65 lbs. Feet of chain overhauled to lift load one foot 154 ft.Equipped with hardened load chain for flexibility and long wearWheel cover with guide slots minimizes jamming and slippingThese Hand Chain Hoists from Milwaukee are equipped with hardened load chain for flexibility and long wear

Milwaukee 9688-20 1-1/2 Ton, 25' Lever Hoist

1-1/2 ton rated capacity, 25 ft. standard lift Chain pull to lift rated load 54 lbs. Weston-type automatic braking system for positive load control Steel chain guide roller and chain stripper for smooth chain feed Strong steel construction and light weight make the Milwaukee line of Lever Hoists a good choice for any application

Milwaukee 9691-20 3 Ton, 20' Lever Hoist

3 ton rated capacity, 20 ft. standard lift Chain pull to lift rated load 61 lbs. Weston-type automatic braking system for positive load control Steel chain guide roller and chain stripper for smooth chain feed Strong steel construction and light weight make the Milwaukee line of Lever Hoists a good choice for any application

Stack-On® GMR13 13Inch Handy Tool Box

Perfect for storing basic tools and supplies Rugged construction for greater strength with heavy-duty carrying handle Lift-out tote tray allows extra portability and seperation of smaller items Nickel-plated, steel draw bolts and galvanized steel hinge pins Tools Not Included

Grip 18192 4-Ton 3-Hook Power Puller With 12' Cable

Heavy duty metal safety shield, polished and zinc plated body frame to prevent rust, drop forged steel hooks with spring safety catches 8000 lbs. pulling capacity, 4000 lbs. lift capacity, 6 maximum lift12 aircraft cable, 360 degree swivel hanging bracket

Fastcap HOD-SINGLE Single Hand on Demand 100 lb load rating

The Fastcap HOD-SINGLE is a Single Hand on Demand with a 100 lb load rating. Make lifting heavy stuff easier with the Fastcap HOD (Handle on Demand) single or double. Just fasten the suction pads to any non porous surface and move it, lift it, transport it, or place it.

Grip 18090 1-Ton Rope Pulley Hoist

Quick, easy, and inexpensive way to lift heavy objectsBlock and tackle mechanism made of smooth operating nylon rollers and rust-proof cadmium plated housingGreat for home, fishing, camping, and boating. A must have for hunters - great for hoisting big game for cleaning!Rugged 1-1/8 nylon pulley, 65 feet of 1/4 rope.

Chicago Pneumatic CP7763 3/4-Inch Pneumatic Impact Wrench

The Chicago Pneumatic CP7763 is a 3/4-Inch Pneumatic Impact Wrench. It is used for driving, fastening, tightening and loosening nuts and bolts of cars, trucks, buses and off-road equipment. The tool is specifically designed for bodyshop applications, tire shops and general vehicle repair.

Chicago Pneumatic CP717 Super Duty Air Hammer

-Most powerful CP air hammer for automotive, truck and off-road equipment-Positive action trigger for precise control-Ideal for front end work, king pin removal and installation of bulldozer walking beams, removal of truck springs and heavy duty spring bushings

Leatherman 830246 Black Oxide Wave Multi-Tool With Nylon Case

The most popular full-size Leatherman tool is now better than ever. Larger knives, stronger pliers, longer wire cutters and all-locking blades make the new Wave an essential piece of equipment for most any job or adventure.

Kawasaki 840124 Green 800 Watts Heavy-Duty Inverter

The Kawasaki 840124 is a Green 800W Heavy-Duty Inverter. The inverter features oversize cooling fan for longer operation. It has two AC outlets for powering household devices. Over load, short circuit and over heat protection protects equipment from damage.

Leatherman Wave 830037 Stainless Steel MultiTool with Leather Sheath

The most popular full-size Leatherman tool is now better than ever. Larger knives, stronger pliers, longer wire cutters and all-locking blades make the new Leatherman Wave an essential piece of equipment for most any job or adventure. Add the Leatherman Bit Kit for maximum versatility.

Steel City OR70008 1 Micon Dust Collection Bag

The Steel City OR70008 offers added value. The OR70008 is a 1 micon bag and is supplied as standard equipment which gives you superior filteration. The OR70008 can be used with Delta 50-850 1 1/2 HP Dust Collectors and Steel City 65200 1 1/2 HP Dust Collectors.

Festool 564178 12V Cordless Drill

ToolKing.com promotional discount codes or coupons are NOT valid on Festool products-The very compact, remarkably light C12 offers all the power, control, torque, and features you need for demanding jobs. Its the lightest 12v on the market and the first cordless drill with a brushless motor. Lift a pound less each time you drill or drive without sacrificing any power. Thats 200 fewer pounds in a typical day. As for longevity, the C12 will drive up to one million screws before it needs to be replaced.

Jet 440435 Farm Jack

This rugged steel constructed jack has multiple uses to lift, push, pull, or clamp. The large cast iron base provides stability while the safety shear pin protects the lifting saddle and dropping of load if the jack is overloaded. The bar holes will accommodate chains, cable, etc. There is a quick disengage with no load and working parts are exposed for easy cleaning and lubrication.

Fastcap THE JACK The Jack of All Trades

The Fastcap Jack was originally designed as a method for lifting base cabinets in order to install shims or adjust leg levelers. It can also be used as a spreader, a heavy-duty clamp, a lift for installing or adjusting heavy entry doors, or used horizontally for pulling together hardwood flooring. This innovative tool is a real time saver and is a must for the professional woodworker's toolbox.

Festool 564180 12V Cordless Drill

ToolKing.com promotional discount codes or coupons are NOT valid on Festool products-The very compact, remarkably light C12 offers all the power, control, torque, and features you need for demanding jobs. Its the lightest 12v on the market and the first cordless drill with a brushless motor. Lift a pound less each time you drill or drive without sacrificing any power. Thats 200 fewer pounds in a typical day. As for longevity, the C12 will drive up to one million screws before it needs to be replaced.

Stack-On DXT-22-1 Deluxe Professional Tread Plate Steel/Plastic Tool Box

-Tread Plate Steel body provides extra support and strength in the center and bottom of the box-Impact resistant top and end caps protect against bumps and abrasions-Nickel plated, steel draw bolts and full-length steel piano type hinge provide greater strength and security-Fully lockable with a molded in and welded in padlock eye-Includes removable tote tray-Molded in side handles allow for two handed carry-Plastic end caps lift the steel body off the ground which reduces the chance of scratches or abrasions to the bottom of the tool box-Does not include tools

Milwaukee 9568 1 Ton, 20' Electric Chain Hoist

All Milwaukee Professional Electric Chain Hoists offer an array of load lift and height options. With 1/2 to 2 Ton capacities and 10 ft. to 20 ft. lifting heights. All offer a multi-disc magnetic brake for positive load holding and spotting. Adjustable upper and lower limit switches, overload limiting clutch and latch-type ridged top hook. User can get single or three-phase voltage motors to meet their operation power requirements. The 24-volt pushbutton station fits easily in your hand to allow thumb, trigger or two-handed operation.

Milwaukee 9567 1 Ton, 15' Electric Chain Hoist

All Milwaukee Professional Electric Chain Hoists offer an array of load lift and height options. With 1/2 to 2 Ton capacities and 10 ft. to 20 ft. lifting heights. All offer a multi-disc magnetic brake for positive load holding and spotting. Adjustable upper and lower limit switches, overload limiting clutch and latch-type ridged top hook. User can get single or three-phase voltage motors to meet their operation power requirements. The 24-volt pushbutton station fits easily in your hand to allow thumb, trigger or two-handed operation.

Stage Lifts

Couldn't find Lift Equipmenthere? Are you looking for something else? Search our partner sites: