Laser Levels tools and information

Find Laser Levels at best prices and buy!

CheckPoint 363 Tripod Adapter for Laser Levels

Model 363 Male 1/4" thread fits all 3D, 880 Gen II, 880 Square, or Inclo-Matic series Lasers. Female 5/8" x 11 thread fits regular construction tripods.

CST/Berger 57-LD400 Laser Detector with Rod Clamp

CST/Berger 57-LD400 is a Laser Detector with Rod Clamp. Locate laser beam in bright light or over long distances with this universal laser detector. It has front and back LCD displays with a memory feature that preserves the last position of the beam if the unit is moved out of the plane of light. Three distinct tones assist targeting from a distance and there is a built-in filter for bright sunlight and electromagnetic interference. Other features include three levels of beam resolution fine, medium, and coarse, four levels of speaker volume, and an auto shut off.

DeWalt DW082K Laser Plumb Bob

The DeWalt DW082K Self-Leveling Laser Plumb Bob kit is just the right tool for providing accurate plumb reference. Two laser beams plumb up and plumb down, project two bright dots. The self-leveling plumb bob is accurate to 1/8 @ 50. The accuracy level is such that, after the spots on the floor and ceiling are marked as indicated by these dots, when rotated in 90-degree increments for a full 360 degrees, the laser dots precisely zero-in on the marked spots. It self levels reasonably quickly, and the out-of-level sensor alerts if it is positioned out of its self-leveling range. Lights and fans can easily be installed even on sloped ceilings, using this Laser Plumb Bob. The overhang of the frame gives good visibility of the lower dot for reference or marking purposes. The DeWalt DW082K Laser Plumb Bob can be used to plumb walls, during stick framing and even to locate the end of the top plate of a wall. Simple to operate, the cross-hair beam pattern makes it easy for the user to find the center of beam, and the magnets help to conveniently attach the DeWalt DW082K Laser Plumb Bob to metal tracks.

CST/Berger 57-LMHCUPK Laser Kit

-The LMH Series levels itself via electronic sensors interfaced with motors, eliminating the need for re-leveling or rechecks. No more fussing with manual leveling screws or bubbles; just turn it on and you are ready for work! Plus, the built-in Anti-Drift System (ADS) sensor provides peace of mind when working on a busy job site; if the lasers height of instrument (H.I.) is altered due to tripod movement or an accidental bump, the operator is instantly alerted.

DeWalt DW077KI 18V Cordless Self-Leveling Rotary Laser Kit - Interior

For precision leveling, the DeWalt DW077KDT 18-volt self-leveling rotary laser kit provides accuracy up to 1/8 inch with a sharp, high-power beam visible up to 100 feet or further when in chalk-line mode. Its four-speed laser rotary head allows selecting laser beams of varying strength. Lower speeds produce a brighter beam and higher speeds produce a more solid laser beam for projecting to longer distances. The bundled wall mount, tripod and floor mount set simplify installation. Its protected rotary head and weatherproof design provide durability for indoor and outdoor locations. Additionally, the red-tinted laser-enhancement glasses also enhance visibility of the laser beam under bright-light conditions or over long distances.The DeWalt DW077KDT rotary laser kit electronically levels itself in both level and plumb modes when switched on. The completely automatic horizontal and vertical self-leveling mechanism has an Out-of-Level shutoff mode that reduces any user error caused due to uneven surfaces. The wireless remote control makes for a quick and hassle-free one-person setup and operation.The DeWalt DW077KDT rotary laser kit is bundled with DeWalts 18V extended run-time battery and tune-up mode charger that can operate using 9.6V to 18V DeWalt batteries. The package includes a 1-hour charger, laser target card, laser enhancement glasses and heavy-duty kit box (w/ padded interior).

DeWalt DW0710 Wall & Ceiling Mount (for DW071 Rotary Laser)

The DeWalt DW0710 Wall & Ceiling Mount is designed to accommodate the DeWalt DW071 rotary laser. The mount provides stability and security in fine detail projects. The operator can alter the mount's elevation for tasks at varying levels by adjusting the rack and pinion height. To move the mount, the operator has to employ a quick release clamp for speedy set up and removal. The mount also features a rough leveling knob for application on uneven, less-than-vertical surfaces to maximize its utility.

CST/Berger 57-LMH600D Electronic Self-Leveling Horizontal/Vertical Dual Beam Rotary Laser with Detector

-The CST/Berger 57-LMH600D Electronic Self Leveling Horizontal/Vertical Dual Beam Rotary Laser Level with Dual Manual Grade offers fast and simple leveling power to handle your toughest jobs with less manpower. -Levels itself horizontally and vertically via electronic sensors interfaced with motors and precision software eliminating the need for re-leveling or rechecks. -The Anti-Drift System, or height of instrument alert, warning the operator that the instrument has been moved. -Achieves an accuracy of 1/16 at 100ft and has a working range of up to 2000ft in diameter when used with the included laser detector. -The laser has a self leveling range of +/-5 degrees (horizontal and vertical) which takes the guess work out of setting up the instrument. Just make sure that the level is laid on its side or on a tripod head that is generally level, and turn it on, the 57-LMH600D takes care of the rest. -The laser level has variable rotation speeds of 0, 150, 300 and 600RPM which makes the 57-LMH600D laser level useful for not only general leveling with the detector and rod, but also when needing to project visible laser lines or chalk lines on walls, floors or surfaces. -Adjustable Laser Chalk lines, Clockwise and Counter Clockwise beam positioning, Dual Manual Grade up to +/-10% in both axis. -Auto Beam Positioning system that positions the laser dot in a plumb down position when being used in the vertical mode allowing you to precisely position the 57-LMH600D laser level over a reference point or mark. -Powered by 4 D batteries powering the unit for up to 75+ hours. -Enclosed and sealed laser beacon that enables the unit to be used in almost all weather conditions.

RoboToolz RT-A1250 Laser Pole

The RoboToolz RT-A1250 Laser Pole is fast and easy to use, versatile, lightweight and invaluable for mounting the laser tools indoors. It has Five 2 sections for maximum height of 12 with adjustable extension. The aperture in laser platform allows for downward plumb beam.

DeWalt DW0730 Laser Target Card

The DeWalt DW0730 is a Laser Target Card. The DW0730 laser target card is used in conjunction with the rotary laser to enhance the visibility of the beam. The magnetic base can be attached to drop ceiling grid or steel studs for easy and accurate layout.

CST/Berger 57LD500 EW UNIVERSAL LASER DETECTOR

CST/Berger 57LD500 EW UNIVERSAL LASER DETECTOR

Stabila 07468 Laser Elevation Rod

The Stabila 07468 Laser Elevation Rod has locking feature offering infinite settings. The Stabila 07468 Laser has a telescoping aluminum alloy rod sections with easily readable graduations.

RoboToolz RT-A1655 Laser Detector / Receiver

The RoboToolz RT-A1655 is laser detector / receiver which has a two sided LCD display and a low battery indicator. It works with RoboToolz and most rotational infrared lasers

CST/Berger 58-MP5 5-Beam Laser Level

The CST/Berger 58-MP5 is a 5-Beam Laser Level. Flashing out of level sensor eliminates rechecks and costly mistakes. This laser level provides 1/4 accuracy at 100 ft. with five separate highly focused laser beams. This laser level has five individual laser diodes for more power and a tighter beam. The MP5 is flexible it can attach to anything and anywhere.

CST/Berger 77-198 S2XL Laser Square

The CST/Berger 77-198 is a S2XL Laser Square. This laser square provides the contractor with the most versatile speed square on the market. With dual horizontal and vertical laser chalklines, projecting lines is quick, easy and very accurate. This laser square features an alignment guide for 90 degree layout, and the ability to calculate and turn angles in 5 degree increments. It is also perfect for 45 degree angles. This laser square features retractable push buttons with adhesive putty that allow the contractor to use on walls or any other smooth vertical surface. And to get the lines just right, this laser square features dual 30 minute level vials and leveling feet to ensure the perfect line projection.

Titan 11046 8-LED Flashlight with Laser Pointer

8 long-life 100,000 hour LEDsBuilt-in laser pointerAluminum alloy constructionIncludes 3 AAA batteries

DeWalt DW0772 Digital Laser Detector & Clamp

The new DW0772 laser detector can locate the beam up to 600 (radius) from the laser. The detector is accurate to 1/25. It features front and rear LCD displays. It can withstand a one-story drop to concrete and is completely waterproof. The detector features 2 accuracy modes and 3 volume settings including mute.

Steel City 25415 Drill Press Laser

-Simply line your work up and know exactly where the bit is going to drill. Battery operated laser mounts easily to your drill press column.

CST/Berger 58-LGA Laser Grade Adapter

The CST/Berger 58-LGA is a Laser Grade Adapter. This adjustable mount is ideal for setting up lasers at desired grade. Vernier allows accuracy of 10 minutes. This laser adapter includes circular level vial. This adapter mount onto a standard 5/8 x 11 head tripod. It is compatible with laser mark LM400-1/-2 (Auto Level feature turned off), Wizard, LM100/200, and all visible beam rotary lasers with a standard 5/8 x 11 mounting thread, and without an automatic out-of-level shut off feature.

DeWalt DW0732 Digital Laser Detector & Clamp

DeWalt DW0732 Digital Laser Detector & Clamp. It is used to enhance the versatility of laser with the digital laser detector and detector clamp. The digital laser detector detects the rotary laser beam inside and outside to a distance of 600. With a front and rear LCD display the operator can view the display much easier than single display models. The volume control has three different settings; high, low and mute. Any battery wattage is eliminated due to the automatic shutoff that turns off the detector if it is left inactive for five minutes. The magnets are located on top to allow the detector to be attached to ceiling track or steel studs. The clamp has a capacity of 3-1/2 so it can be attached to a grade rod or to dimensional 2 x 4 lumber. The quick release clamp is designed for fast and easy setup.

CST/Berger 55-SLVP20ND SAL N Series Automatic Levels 20x Auto Level Kit

The CST/Berger 55-SLVP20ND is a SAL N Series Automatic Levels 20x Auto Level Kit. It has compensator lock which protects instrument during transport or storage. It also acts as a handy compensator checking tool. It has top-mounted optical peep-sight for quick reference. Level has large easy-to-use precise focusing knob. The Water-resistant, sealed construction plus sunshade is for use in various weather conditions. It has fine motion knobs on left and right sides with friction-braked rotation with endless horizontal drive.

Stabila 05000 Self-Leveling Rotary Laser Level

The Stabila 05000 General Purpose Self Leveling Rotating Laser Level is fast to set-up, easy to use, and simple to carry. 250 ft. operating radius with detector. Shoots horizontal, vertical, square and plumb. Jobsite vibration stabilization system. 4-1/2 built-in tripod height adjustment range. Out of level alert. The Stabila 05000 Laser can be re-positioned 360 for picking out layout lines without changing point of ref.

CheckPoint 327 Professional Torpedo Laser Level

The model 327 patented 880 Gen II Laser torpedo level is the next generation from Checkpoint for the professional trades featuring a more powerful laser, a new enhanced ergonomic designand front tapped aperture wich allows use of Checkpoint's specialized lenses and other accessoriesThe new high powered laser beam system is accurate 1/4-Inch (.250) at 100' and is 3-dimensionally aligned from all planes of refernce - a calibration feature unique to the Checkpoint series of professional laser levelsIt features an auto 45-degree angle at one end for a quick referncing, a perpendicular tie-in centering notch, a tripod mount and a 4-vial (45 min/arc) system including 45,90,0 and 30 references wich can be used from any side or all three sides simultaneously for more sensitive flat surface calibrationThe 880 Gen II is aircraft anodized with permanent laser engraved graphics, has a lifetime guarantee on it's CNC 6061-t6 fully machined aluminum body, the professional standard.

DeWalt DW7187 Heavy-Duty Adjustable Miter Saw Laser System

The DW7187 Adjustable Miter Saw Laser System was designed for the professional miter saw user and will only fit the DeWalt DW715, DW716 & DW718 12 Miter Saws. The laser module mounts on the upper guard of the miter saw and the power supply, which delivers the ability for the laser to be turned on and off independent of blade rotation, mounts behind the saws handle. The laser is encased in a durable protected housing designed to meet the demands of the jobsite and shop.

Wilmar W2380 2 in 1 Flexible Led Light and Laser Pointer

The Wilmar W2380 is 2 in 1 Flexible Led Light and Laser Pointer. It has magnetic base and includes Bonus LR44 batteries.

CheckPoint 308 SuperVee Mag Base (for Laser Level)

The CheckPoint 308 Super-Vee Mag Base is a machined, super deep 135-degree billet 6061-t6 aluminum V-groove base with aircraft anodizing, permanent laser engraved graphics and, six rare-earth neodymium magnets. Designed for unsurpassed holding power on 1/2-Inch to 6-Inch diameters the Super-Vee Mag Base will hold 30 times its weight and like its counterpart, the Stubby Mag Base, is a compact 9-Inches long allowing easy laser alignment projection from any piping run or structural tie-in.The Super-Vee Mag Bases V-groove is integrated with radius ends to allow flush alignments to radius bends and/or corners and self-aligns perpendicularly to any pipe utilizing a specially designed Vee-Notch at the center of the base 90-degrees to the main 135-degree V-groove, especially useful when checking for tie in alignments to a specific location on a pipe run using the laser projection.Designed to be used with any of the 880, 770, 660 or 600 series laser tools, the Super-Vee Mag Base is a development accessory derived from the demand of electricians, pipe fitters and fabricators in the professional trades sector.Note: The Stubby Mag Base is flat bottomed to accommodate the Slope Pin System for automatic slope and grade projections).

RoboToolz RT-3610-3 3-Beam Level and Square Laser

The RoboToolz RT-3610-3 3-Beam Level and Square Laser has a precision crafted in anodized, machined aluminum for superior accuracy and durability. The 3 square (90) beams provide simultaneous level, plumb and square reference points. All beams originate from the same source guaranteeing superior accuracy and repeatability.

Stabila 06040 LE-40 Laser Distance Measurer

Simple point and shoot operationCompact and Light and durable fits in tool pouchesMeasure and calculate Areas, volumes, partial lengths and add and subtract measurements.Continuous Measure function for tape measure applicationsStorage of the last 19 measurementsReads in inches, inches Visible laser dot for pin point measuring and feet, decimal and fractional and metric

Stabila LE 50 06150 Laser Distance Measurer

The Stabila 06140 is one of the worlds smallest and lightest Laser distance measurer. Measuring range up to 100 m. The new laser distance measurer LE 50 from STABILA can measure faster, more accurately and more comfortably. One person using the STABILA LE 50 digital measuring tool can measure quicker and more accurately than two persons using traditional measuring instruments, all without twisting and turning. At the push of a button, the LE 50 calculates the geometric values from length the measurement. The LE 50 features one-hand operation and a simple menu guide.

CST/Berger 57-AL500H Electronic Self-Leveling Rotary Laser

The CST/Berger 57-AL500H is an Electronic Self-Leveling Rotary Laser. The AL-500H is fully electronic self-leveling (5) and provides accuracy of up to 1/8-Inch at 100-ft (3.2mm at 30m) with a working range of 1,000-ft (305m) when used with the LD-90 Rotary Laser Detector. Simple one button operation makes this 600RPM rotary laser easy to set-up and use. The durable design of the AL-500H features a heavy-duty protective cage for the laser beacon and co-molded water resistant rubber housing (IP54). The AL-500H is powered by 6 AA Alkaline batteries.

CST/Berger 57-LM800GR Electronic Self-Leveling Dual-Grade Rotary Laser

The CST/Berger LM800 series was voted one of the years 100 Best New Products by Professional Builder.The CST/Berger 57-LM800GR is a Electronic Self Leveling Dual-Grade Rotary Laser. This laser has single speed rotation with dual slope capability up to 10%. This laser has anti drift system to signal operator when unit is moved out of position. It has battery level indicator for saving power.

RoboToolz RT-7510-3 3-Beam Self Leveling Laser

RoboToolz RT-7510-3 3-Beam Self Leveling Laser has three square (90) beams provide simultaneous level and plumb reference points. All beams originate from the same source guaranteeing superior accuracy and repeatability. Versatile accessory allows user to change the location of any of the three horizontal leveling beams without changing elevation of beams.

Stabila 08500 V2R Vent To Roof Laser

Digital Read Out- tells you exactly how far from grade you areArrows, point in the direction of and intuitively guide you towards gradeDust and Water proof- submergibleExtremely durable-passes the toughest drop tests of 10Dual displays-front and backLarge 4 laser receiving bandJobsite toughRubberized for ruggednessSelf-Centers automatically in pipes or holes 1 ½-4 Illuminated Vial for dark conditions

DeWalt DW087K Self-Leveling Line Laser (Horizontal & Vertical)

The DeWalt DW087K self-leveling line laser is accurate to +/- 1/8 @ 30 for level applications and is self-leveling within 4. The magnetic pivot bracket in the DeWalt DW087K helps the laser attach itself to any metal surface to exploit nearly 360 operation. In addition, the DeWalt DW087K comes with a universal wall mount as well. Designed to save time on the jobsite, the laser has a one-button operation. The DeWalt DW087K self-leveling line laser works great for hanging items or for mounting boxes, steel framing walls, ceilings and trim setting cabinets. The full over-molded housing of DeWalt DW087K ensures durability in the harsh jobsites. It has an out of level indicator in which the beams flash when the line laser is out of level. The tool can easily take care of leveling requirements for steel framing in walls, ceilings, soffits, and trim work in setting cabinets and aligning head casings. The kit includes line laser, kit box and 3 AA batteries.

DeWalt DW074KD Heavy-Duty Self Leveling Interior/Exterior Rotary Laser

The new DW074KD self-leveling interior/exterior rotary laser from DEWALT is not only accurate to plus or minus 1/4 inch per 100 feet, but it's built to take the bumps of the job site as well. A durable rotary cage helps protect the rotary head when dropped and an innovative configuration of multiple, thin struts maintains the unit's strength while eliminating blind spots. And it's easy to use! The unit is self-leveling in horizontal mode, and the addition of arrow buttons used for manual leveling in vertical mode are far more intuitive than traditional knobs. The beam is bright and sharp--it can be seen up to 100 feet indoors and can be detected up to 1000 feet in diameter outdoors. The laser also offers a weather resist housing which offers a durable and accurate service. The new DW0742 laser detector and clamp will locate the beam up to 1000 feet (diameter) from the laser.

CST/Berger 58-LM2 LaserMark LM2 Laser Level and Square?Pro

The CST/Berger 58-LM2 is a LaserMark LM2 Laser Level and Square?Pro. This projects line on floor and wall. One click of a button gives a perfect 90 horizontal and vertical laser chalk lines on the floor-lines that also extend to create plumb references on nearby walls. It is ideal for floor and wall tiling, paneling, wall fixtures, wallpapering, stenciling, wainscoting, finish carpentry, outlet switches, lighting fixtures, wall studs, partitions and much more.

Delta 17-950L 16-1/2Inch Laser Drill Press, 250-3000 RPM, 1/2 HP

The Delta 17-950L is a 16-1/2 inch Laser Drill Press. The drill press has adjustable-position locking depth stop for accurate depth measurement and repetitive drilling. It features bright laser crosshairs clearly which indicate the drill point. 14 inch x 18 inch woodworker-friendly table includes T-slots, a removable insert and tilts 0-45 forward and 0-90 left and right with positive stops at 0, 45 and 90. It has industrial induction motor for long-lasting, smooth performance.

RoboToolz RT-7210-1 Self-Leveling Remote-Control Laser Level

RoboToolz RT-7210-1 Self-Leveling Remote-Control Laser Level is like having a 200 level on the job site. The RT-7210-1 is a remote controlled, wireless, rotary (motor driven), self-leveling system that gives the accuracy of 2000 laser beacon system for much less. The self-leveling system ensures accuracy of 1/8 @ 100. The RT-7210-1 reduces labor by up to 75% versus conventional leveling methods.

Stabila 38532 Magnetic Box Frame Level Jamber Set - 78Inch & 32Inch Levels

Stabila 38532 Magnetic Box Frame Level Jamber Set includes the 38578 - 78 level ideal for setting door frames and the 38532 - 32 level ideal for headers, sills and thresholds. This level has a wider profile which means an even stronger frame. The accuracy is certified, top and bottom readings and sports new rubber pad end caps and wall grips that are functional yet removable for flush measuring. Rare Earth magnet technology offers unbelievable holding power to metal studs, beams and pipe.

Stabila LE 200 06200 Laser Distance Measurer

The Stabila 06200 features the calculating convenience of a computing centre in mini-format. Measuring range up to 200 m. The new laser distance measurer LE 200 from STABILA is a really practical tool for every application, on site, in the workshop and during planning. The Stabila 06200 rapidly and securely determines all the measurement values you need. The unit has a wide variety of functions for simple distance measurements, with a built-in computer for measuring areas, volumes and partial and serial measurements automatically. The LE 200 handles difficult construction work height measurements by means of indirect calculation from 3 measured values applying Pythagoras Theorem. The last 15 measurement values are always stored automatically. There is storage space freely available for a further 15 values, where your specific constants can be stored.

CST/Berger 58-LM54E Self-Leveling Interior-Exterior Multi-Line Laser Cross with Down Plumb

Please note that this item is on backorder with no ETAThe CST/Berger 58-LM54E is a Self-Leveling Interior-Exterior Multi-Line Laser Cross with Down Plumb. This automatic self-leveling laser level quickly level, plumb and align doors and frames, cabinets, shelving, drop ceilings, wainscoting and paneling, wall hangings, pipe and conduit and many more. 4 laser crosses at 90 to each other and the laser crosses to the ceiling.

CST/Berger 58-LM54 New Multi-Cross Line Laser Kit

The CST/Berger is a 58-LM54 New Multi-Cross Line Laser Kit. The level offers an economical way to do countless leveling and alignment jobs. The simple but precise alignment tool projects a vertical (plumb) line and/or a horizontal (level) line at the press of a button. It is ideal for finish carpentry, floor and wall tile installation, wallpaper applications and stenciling, plumbing studs, leveling stairs or beams and much more. Two separate 635nm diodes produce bright and sharp laser reference lines. The heavy-duty magnetically dampened compensator eliminates error by quickly self-leveling the laser. Obtain leveling accuracy of up to 5/32 at 30 with a recommended working range up to 32. The out-of-leveling-range sensor triggers the beams to automatically shut off when the unit is moved out of its broad +/-4 self-leveling range.

RoboToolz RT-3620-2K Two Beam Rotating Laser System with Detector and Bracket

The RoboToolz RT-3620-2K Two Beam Rotating Laser System with Detector and Bracket has a spin, line dither / scan and dot modes for interior and exterior level, plumb and square applications. It has a squaring beam for 90 layouts.It operates at 3 rotational speeds, 50, 250, 600 RPM

CST/Berger 54-300LP Magnum Line 22X transit Level with Laser Plummet

CST/Berger 54-300LP is a Magnum Line 22X transit Level with Laser Plummet. Both vertical and horizontal accuracy are excellent with this transit. 1/8 accuracy at 100 ft. and a 250 ft. working range. No more plumb bob swinging in the wind with this unit. Laser plummet features a bright 635 nm diode with 3 element glass lens. This instrument is designed with a heavy duty dome shaped head that holds a double ball-bearing center, giving the user 5 minute readouts, plus 5/8 x 11 tripod mounting thread.

CST/Berger 57-AL500HVI Electronic Self Leveling Horizontal and Vertical Interior Rotary Laser Level

The CST/Berger 57-AL500HVI is a Horizontal/Vertical Electronic Self-Level Rotary Laser Interior. The AL-500H is fully electronic self-leveling (5) and provides accuracy of up to 1/8-in at 100-ft (3.2mm at 30m) with a working range of 1,000-ft (305m) when used with the LD-90 Rotary Laser Detector. Simple one button operation makes this 600RPM rotary laser easy to set-up and use. The durable design of the AL-500H features a heavy-duty protective cage for the laser beacon and co-molded water resistant rubber housing (IP54). The AL-500H is powered by 6 AA Alkaline batteries.

CST/Berger 57-AL500HVPKG Horizontal/Vertical Electronic Self-Leveling Rotary Laser with Detector, Tripod, Pole

The CST/Berger 57-AL500HVPKG is a Horizontal/Vertical Electronic Self-Leveling Rotary Laser with Detector, Tripod, Pole. The AL-500H is fully electronic self-leveling (5) and provides accuracy of up to 1/8-Inch at 100-Feet (3.2mm at 30m) with a working range of 1,000-Feet (305m) when used with the LD-90 Rotary Laser Detector. Simple one button operation makes this 600RPM rotary laser easy to set-up and use. The durable design of the AL-500H features a heavy-duty protective cage for the laser beacon and co-molded water resistant rubber housing (IP54). The AL-500H is powered by 6 AA Alkaline batteries.

CST/Berger 57-AL500HVDI Electronic Self Leveling Horizontal and Vertical Rotary Laser Level with Detector

The CST/Berger 57-AL500HVDI is an Electronic Self Leveling Horizontal and Vertical Rotary Laser Level with Detector. The AL-500H is fully electronic self-leveling (5) and provides accuracy of up to 1/8-Inch at 100-Feet (3.2mm at 30m) with a working range of 1,000-Feet (305m) when used with the LD-90 Rotary Laser Detector. Simple one button operation makes this 600RPM rotary laser easy to set-up and use. The durable design of the AL-500H features a heavy-duty protective cage for the laser beacon and co-molded water resistant rubber housing (IP54). The AL-500H is powered by 6 AA Alkaline batteries.

Makita LS1013L Factory Reconditioned 10 inch Dual Sliding Compound Miter Saw with Laser, 3700 RPM, 15.0 Amps

The Makita LS1013L is a Factory Reconditioned 10 inch Dual Slide Compound Miter Saw with Laser. The tool has a built-in laser that clearly indicates line of cut with micro fine adjustments. It also has an independent switch that allows laser to be seen with and without the blade rotating. The dual steel rails with dual linear ball bearings ensures stable, accurate and vibration-free cutting.

CST/Berger 58-ILMXTEPK Interior-Exterior InchHi-PoweredInch Self-Leveling Laser Cross Level Kit

The CST/Berger 58-ILMXTEPK is a Interior-Exterior Hi-Powered Self-Leveling Laser Cross Level Kit. The ILMXT is the ideal laser line layout tool for both interior and exterior applications. Easy-to-use operation features horizontal (level) and vertical (plumb) for both interior and exterior jobs, as well as laser cross and manual mode for interior applications. The outdoor Pulsing mode feature provides easy range is over 100 ft. when used with detector.

CST/Berger 58-ILMXL-UM LaserMark ILMXL Self-Leveling InchHi-PoweredInch Laser Cross Level

The CST/Berger 58-ILMXL-UM is a LaserMark ILMXL Self-Leveling Hi-Powered Laser Cross Level. The ILMXL has the high-powered laser diode to project bright laser level and plumb reference chalklines. Easy-to-use single button operation features horizontal (level) and vertical (plumb) for interior jobs, as well as laser cross and manual mode for interior applications. Indoors, the ILMXL Laser projects reference chalklines, up to 100 ft. (indoors). It is ideal for floors & wall tiles, cabinets & shelving, installing closets, wallpaper & stencil work, interior decorating, finish carpentry, wall studs & partitions, door & window installations, drop ceilings, wainscoting & paneling, wall fixtures, electrical outlets and switches.

DeWalt DW073KD Heavy-Duty 18V Cordless Rotary Laser - Combo Kit (Interior/Exterior)

The DeWalt DW073KD Heavy-Duty 18V Cordless Rotary Laser - Combo Kit provides accuracy, durability, versatility and visibility. It is designed for interior and exterior applications on both residential and commercial sites. For professionals, it is ideal for ceiling and wall installers, concrete workers, masons, remodelers and deck builders. The DW073KD is a manually leveled rotary laser that has dual side-by-side laser diodes for an extremely bright beam and is accurate to 1/4 at a radius of 100 (1/8 inch at 50) with a visible diameter of 200. Long-range leveling to 600 is possible with the digital laser detector. Laser setup is quick and easy with the tools built-in three-in-one floor mount, adjustable rack-and-pinion wall mount and 5/8-11 inch threaded tripod insert.

Castlevania Aria Of Sorrow Episode 17: Boss-Death

Couldn't find Laser Levelshere? Are you looking for something else? Search our partner sites: