KD Tools                                                                                                                            

KD Tools tools and information

Find KD Tools at best prices and buy!

Denver Tools 502 150mm Air Hammer

The Denver Tools 502 is a 150mm Air Hammer which comes with 4 chisels.

Denver Tools 301 Jitterburg Sander

The Denver Tools 301 is a pneumatic Jitterburg Sander. This traditional style jitterbug sander with metal construction features a rubber grip and locking clamps to give you a good grip on both the tool and the sandpaper. This sander can be used on many materials including paint, metal and fiberglass.

Denver Tools 816A Air Angle Die Grinder

The Denver Tools 816A is a Air Angle Die Grinder. The angled head provides access to hard to reach places.

Denver Tools 653A 3/8-Inch In-line Air Drill

The Denver Tools 653A is a 3/8-Inch In-line Air Drill with variable speed. This small drill makes drilling in tight spaces easy.

Denver Tools 93486 Mini Grease Gun

The Denver Tools 93486 is a Mini Grease Gun. This small, one-hand operated grease gun is perfect for greasing in tight spaces.

Denver Tools RM016 16 oz Rubber Mallet

The Denver Tools RM016 is a 16 oz Rubber Mallet. This mallet features a double-faced rubber head with a rubber gripped handle.

Denver Tools SC02 1/4-Inch Swivel Connector

The Denver Tools SC02 is a 1/4-Inch Swivel Connector. This connector has a 360 swivel to prevent the air hose from kinking.

Denver Tools 120019 Brad Nailer

The Denver Tools 120021 Brad Nailer drives 18 gauge brad nails from 15mm to 50mm in length. A die cast aluminum body makes this nailer strong and light-weight while a rubber comfort grip handle provides improved control and comfort even during extended use. A touch-strike security system increases safety for the operator and a new 2 spring magizine pushes the nails smoothly. This nailer is ideal for door and window trims, decorative trim, cabinet work, finish paneling, frames and flooring.

Denver Tools 95439 Air Control Unit

The Denver Tools 95439 is an Air Control Unit. This air control unit consists of an air filter, air regulator and an oiler. It helps prevent costly damage to your air tools caused by rust, scale and moisture. It provides clean, dry, regulated air over a wide range of air flows. It is easy to install and maintain.

Denver Tools DBH24 24-Ounce Dead Blow Hammer

The Denver Tools DBH24 is a 24-ounce dead blow hammer. This steel shot filled, bright orange dead blow hammer is an essential part of anyone's toolbox.

Denver Tools ABG2 Air Blow Gun

The Denver Tools ABG2 is an Air Blow Gun featuring a comfortable vinyl coated control lever and durable chrome plated zince cast body.

Denver Tools RBC012 12-Inch Ratchet Bar Clamp

The Denver Tools RBC012 is a 12-Inch Ratchet Bar Clamp. It is a general purpose clamp that can be used on a variety of different tasks around the jobsite and the home.

Denver Tools 650 3/8-Inch Keyless Air Drill

The Denver Tools 650 is a 3/8-Inch Keyless Air Drill with an easily accessible forward/reverse switch making it easy to use with one hand.

Denver Tools AR2 Brass Air Regulator with Gauge

The Denver Tools AR2 is a Brass Air Regulator with Gauge. This regulator and guage allow you to monitor and control the air flow and pressure of your compressor.

Denver Tools 703A 3/8-Inch Driver Air Ratchet Wrench

The Denver Tools 703A is a 3/8-Inch Driver Air Ratchet Wrench.

Denver Tools 113 Air Body Saw (Front Exhaust)

The Denver Tools 113 is a Air Body Saw with Front Exhaust.

Denver Tools DHTCZ-1 Zine Dual Head Tire Chuck

The Denver Tools DHTCZ-1 is a Zine Dual Head Tire Chuck for inflating tires.

Denver Tools TC1 Air Brass Tire Chuck

The Denver Tools TC1 is a Air Brass Tire Chuck. This solid brass air chuck has a standard 1/4-Inch NPT fitting and can be used to inflate various types of tires.

Denver Tools 94346 Mini Air Line Filter

The Denver Tools 94346 is a Mini Air Line Filter. This 40 micron particle filter can operate at up to 135 PSI and 140 degrees Fahrenheit. The reservoir of this filter is made of durable polycarbonate and features a push style drain.

Denver Tools 811B 1/4-Inch Air Die Grinder

The Denver Tools 811B is a 1/4-Inch Air Die Grinder. This powerful air die grinder is compact and lightweight making it easy to use for most grinding, deburring and polishing applications.

Denver Tools ABK2 Professional Air Brush Kit

The Denver Tools ABK2 is a Professional Air Brush Kit. This kit includes everything needed for painting model cars, trains and art detail projects, stenciling, stippling, base coats and much more.

Denver Tools 93703 3 Piece Ratchet Set

The Denver Tools 93703 is a 3 Piece Ratchet Set with 1/4-Inch, 3/8-Inch and 1/2-Inch drives. Each ratchet wrench is 8-Inches long and features a non-slip cushion grip for better grip and comfort.

Denver Tools 19212810 1/2-Inch Electric Impact Wrench

The Denver Tools 12810 is a 1/2-Inch Heavy Duty Industrial Electric Impact Wrench. The 19212810 Electric Impact Wrench has a reversiable 7.5amp moter and rugged die cast aluminum gear housing. A rocker trigger allows for easy one-hand operation.

Denver Tools 417002 3/8-Inch Electric Angle Drill

The Denver Tools 417002 is a 3/8-Inch Electric Angle Drill. This reversible drill features an easy to operate pull on/off paddle switch and a locking mechanism for continuous rotation. The ergonomic design and 55 degree angled chuck this drill easy to use in confined working areas.

Denver Tools 280 Air In-Line Sander

The Denver Tools 280 is an Air In-Line Sander. This in-line sander features a conveinent push trigger on the handle so you don't have to take your hands off the tool to flip a switch. There is also a standard knob in the front of the sander for two handed operation, giving you better control over the movement of the sander.

Denver Tools QC1 5-Piece Brass Quick Coupler Set

The Denver Tools QC1 is a 5-piece set of quick couplers.  These durable brass couplers allow you to easily and quickly connect your air tools to an air hose.

Denver Tools 610003 6 Ton Hydraulic Bottle Jack

The Denver Tools 610003 is a 6 Ton Hydraulic Bottle Jack. This compact jack is durable and easy to use.

Denver Tools 610004 8 Ton Hydraulic Bottle Jack

The Denver Tools 610004 is a 8 Ton Hydraulic Bottle Jack. This compact jack is durable and easy to use.

Denver Tools 610002 4 Ton Hydraulic Bottle Jack

The Denver Tools 610002 is a 4 Ton Hydraulic Bottle Jack. This compact jack is durable and easy to use.

Denver Tools 610001 2 Ton Hydraulic Bottle Jack

The Denver Tools 610001 is a 2 Ton Hydraulic Bottle Jack. This compact jack is durable and easy to use.

Denver Tools MSS10 5 Piece 1/8-Inch Die Grinding Stone Set

The Denver Tools MSS10 is a 5 Piece 1/8-Inch Die Grinding Stone Set with 5 assorted mounted grinding stones.

Denver Tools MSS101 5 Piece 1/4-Inch Die Grinding Stone Set

The Denver Tools MSS101 is a 5 Piece 1/4-Inch Die Grinding Stone Set with 5 assorted mounted grinding stones.

Delta 50-274 Mobile Base for Delta Tools

The Delta 50-274 is a mobile base for delta tools. Delta mobile base provides stationary machines with increased mobility for positioning them at any place, whether its across the shop or out-of-the-way for convenient storage. Delta mobile bases are made of heavy-gage steel and feature a foot-operated control lever that raises and lowers the base for easy movement and positioning.

Denver Tools 613002 2 Ton Engine Crane

The Denver Tools 613002 is a 2 Ton Engine Crane. This engine crane has four settings for half ton, full ton, one and a half ton and two ton loads and features a hydraulic action pump for easy lifting. The legs and easily fold up into the body for easy storage and four caster wheels are attached to the bottom of the main body so it can easily be rolled away.

Denver Tools 170028 Low Pressure Spray Gun

The Denver Tools 170028 Low Pressure Spray Gun may be used at work or home with highly efficient results. This product's high quality is due to the accuracy of each one of its components, as well as the materials composition, such as: treated and stainless steel and aluminum. This gun can be used in several applications, from high viscosity and slow drying paints (enamels), to heavy and quick drying paints (lacquers, synthetic enamels, latex, etc.), and a flexible fan pattern.

Spring Tools IPTS108 Impact Driver Set

Spring Tools IPTS108 is an Impact Driver Set. Combination impact tool and screwdriver for re-coining damaged, corroded or rusty fastener heads, and removing sticky, unmovable rusted fasteners or corroded threads. Pull back the ball holding the high tension spring, striking the fastener head, causing up to 5,000 lbs of impact on the fastener head - then use as screwdriver to remove fastener.

Denver Tools 120013 34°Angle Finish Nailer

The Denver Tools 120013 34 Angle Finish Nailer drives 15 gauge finish nails from 32mm to 64mm in length. Its large cast aluminum body provides more power to easily drive nails into hard woods. The well balanced design makes it more efficient and the angled magazine enables you to nail into corners. The nailer features a 360 degree exhaust port that can be adjusted to any direction and a quick release nose cover to easily clear jams. The angle finish nailer is ideal for door and window trims, exterior trims, cabinet work, finish paneling and decorative trims.

Denver Tools T11S 7 Piece Air Micro Die Grinder Kit

The Denver Tools T11S is a 7 Piece Air Micro Die Grinder Kit. This kit includes a pneumatic angle die grinder designed for grinding and smoothing small surfaces. Using different abrasive tools this grinder can also be used to sand or polish materials such as metals, wood and plastic.

Denver Tools 702A 1/2-Inch Drive Air Impact Wrench

The Denver Tools 702A is a 1/2-Inch Drive Air Impact Wrench. This heavy duty, reversible impact wrench is designed for use in automotive applications.

Denver Tools PAK7 16 PC Air Tool Accessory Kit

The Denver Tools PAK7 is a 16 piece Air Tool Accessory Kit that includes several heavy duty components designed to optimize air tool operation.

Denver Tools AG0004 40 Piece Rotary Tool and Accessory

The Denver Tools AG0004 is a 40 Piece Rotary Tool and Accessory. This kit includes a variable speed rotary tool with a flexydrive tool attachment.

Denver Tools AHPE01 1/4-Inch x 25-Foot Recoil Air Hose

The Denver Tools AHPE01 is a 1/4-Inch x 25-Foot Recoil Air Hose. This self storing air hose snaps back into shape just like a telephone cord.

Denver Tools ABG5 24-Inch Professional Air Blow Gun

The Denver Tools ABG5 is a 24-Inch Professional Air Blow Gun. This air gun included a rubber tip as well as a 24-Inch wand attachment.

Denver Tools AHPE02 1/4-Inch x 50-Foot Recoil Air Hose

The Denver Tools AHPE02 is a 1/4-Inch x 50-Foot Recoil Air Hose. This self storing air hose snaps back into shape just like a telephone cord.

Denver Tools A280 Air Flow Regulator with Pressure Gauge

The Denver Tools A280 is an Air Flow Regulator with Pressure Gauge. This regulator and guage allow you to monitor and control the air flow and pressure of your compressor.

Denver Tools ABG3 5 Piece Air Blow Gun Kit

The Denver Tools ABG3 is a 5 Piece Air Blow Gun Kit. This kit comes with a nickel plated brass body air gun and four assorted tips.

Denver Tools 120021 2 In 1 Combo Nailer

The Denver Tools 120021 2 In 1 Combo Nailer drives 18 gauge finish nails from 15mm to 50mm in length as well as 18 gauge staples from 16mm to 40 mm in length. The 2 in 1 magazine shoots staples and finish nails without adjustment. The large cast aluminum body provides more power to easly drive nails into hard woods. A rubber comfort grip handle privides improved control and comfort even during extended use. The 192120021 2 In 1 Combo Nailer also has a 360-Degree exhaust port that can be adjusted to any direction. Continuous firing makes for high efficient working and a narrow nose is ideal for door and window trims, exterior trims and cabinet work as well as finish paneling, decorative trims and furniture making.

Denver Tools LC011 11-Inch Locking C-Clamp With Rubber Grip

The Denver Tools LC011 is a 11-Inch Locking C-Clamp With Rubber Grip. This handy 11-Inch C-Clamp has a durable rubber cusioned grip for better handling and increased comfort.

Denver Tools 93701 3 Piece Stubby Ratchet Set

The Denver Tools 93701 is a 3 Piece Stubby Ratchet Set with 1/4-Inch, 3/8-Inch and 1/2-Inch drives. Each ratchet wrench is 5-1/2 Inches long and features a non-slip cushion grip for better grip and comfort.

Denver Tools DBH16 16 oz (1 Pound) Dead Blow Hammer

The Denver Tools DBH16 is a 16 oz (1 Pound) Dead Blow Hammer. This steel shot filled, bright orange dead blow hammer is an essential part of anyone's toolbox.

"New Years Eve 2008"

Couldn't find KD Toolshere? Are you looking for something else? Search our partner sites:

                                                                                                                              KD Tools