Kapro Tools                                                                                                                              

Kapro Tools tools and information

Find Kapro Tools at best prices and buy!

Kapro 325-12 12Inch Magnetic Lock Combination Square

-Kapro 325-12 12 Magnetic Lock Combination Square

Kapro 784-40-24 24Inch Kapro Lite Box Level

The 784 Kapro lite box level has a non scratching, non conductive plastic frame with superior impact resistance. With 2 crystal clear solid electronically calibrated acrylic vials, this sturdy plactic level has an accuracy of 1.0mm/M - 0.057. This level is especially designed for electricians.

Kapro 248 16Inch Level Extenders

-The Kapro 248 16 Level Extenders give you accurate leveling at any length.

Kapro 241 9Inch Torpedo Level W/ Detachable Line Level

-Kapro 241 9 Torpedo Level W/ Detachable Line Level

Kapro 240-01 Surface Level

A small multipurpose level with precast holes for easy attachmentSensitivity 30arc/min. Bulls eye style level.

Kapro 440-08 Line Level

Lightweight to prevent line sag and comes with a handy pocket clip and V-groove base for work on pipes.

Kapro 444-7 7Inch Rafter Square

The 444 7 rafters square has a right angle guide and allows precision angle cuts.The roof rafter layout can also be used for for stair stringer layout.

Kapro 308-24 24Inch Ruler / Straight Edge

The 24 308 Aluminum Straight edge ruler is of contractor grade with anodized profile and wear-resistant U.V. cured screen printing.The 2 wide ruler has printed scales accurate to 0.7mm per 1000mm.24 long

Kapro BAG-72 Nylon 72Inch Level Bag

72 Heavy Duty nylon level bag to protect your level.

Kapro 309-08 8Inch Legend Carpenter's Square

The 309 LEDGEND® carpenters square has a unique support ledge to give an extra hand when marking shelves or any other surface.The permanently etched stainless steel blade with convenient 22.5 , 45 and 67.5 angles marked on the blade and certified 90.The blade is permanently attached to the handle with Accu-Fix? bonding technology.

Kapro 150-81-24 24Inch Professional I-Beam Level

The 150 Professional I-beam has injection molded silicon vials with Kapros Patented Plumbsite®/Front Vial Viewer feature to save time and money while eliminating neck and back strain.With its sturdy I-beam construction, this level has a top view reading on the horizontal vial and an itegrated Euroslot hanging hole in the end cap and a V-Groove base for leveling tubes, pipes and conduits.24 long

Kapro 150-81-60 60Inch Professional I-Beam Level

The 150 Professional I-beam has injection molded silicon vials with Kapros Patented Plumbsite®/Front Vial Viewer feature to save time and money while eliminating neck and back strain.With its sturdy I-beam construction, this level has a top view reading on the horizontal vial and an itegrated Euroslot hanging hole in the end cap and a V-Groove base for leveling tubes, pipes and conduits.60 long

Kapro 105-48 48Inch Topgrade? Gradient Level

Gradient levels are used for setting a particular pitch or slope and are typically for professional applications.The 24 Topgrade? Gradient Level has 3 Crystal clear epoxy glue fixed Solid Acrylic vials with a lifetime guarantee to set accurate slopes of 1 and 2 percentAccuracy of mm/M ? 0.029 on all vialsIncludes conversion of pitch and slope.48 long

Kapro 308-48 48Inch Ruler / Straight Edge

The 24 308 Aluminum Straight edge ruler is of contractor grade with anodized profile and wear-resistant U.V. cured screen printing. The 2 wide ruler has printed scales accurate to 0.7mm per 1000mm. 48 long

Kapro 981-41-36 36Inch Hercules? Box Section Level w/Plumbsite®

The 981 Hercules? Box level has Kapros Patented Plumbsite®/Front Vial Viewer feature to save time and money while eliminating neck and back strain in a strong durable box frame profile.With 2 crystal clear epoxy locked solid acrylic vials and two milled surfaces for controlled and definable flatness for the entire length of the level, this level has an accuracy of 0.5mm/m - 0.029.The Integrated Euroslot hanging hole in the end cap enables you to hang it on any peg on your tool wall.36 long

Denver Tools 502 150mm Air Hammer

The Denver Tools 502 is a 150mm Air Hammer which comes with 4 chisels.

Denver Tools 301 Jitterburg Sander

The Denver Tools 301 is a pneumatic Jitterburg Sander. This traditional style jitterbug sander with metal construction features a rubber grip and locking clamps to give you a good grip on both the tool and the sandpaper. This sander can be used on many materials including paint, metal and fiberglass.

Denver Tools 816A Air Angle Die Grinder

The Denver Tools 816A is a Air Angle Die Grinder. The angled head provides access to hard to reach places.

Denver Tools 653A 3/8-Inch In-line Air Drill

The Denver Tools 653A is a 3/8-Inch In-line Air Drill with variable speed. This small drill makes drilling in tight spaces easy.

Denver Tools 93486 Mini Grease Gun

The Denver Tools 93486 is a Mini Grease Gun. This small, one-hand operated grease gun is perfect for greasing in tight spaces.

Denver Tools RM016 16 oz Rubber Mallet

The Denver Tools RM016 is a 16 oz Rubber Mallet. This mallet features a double-faced rubber head with a rubber gripped handle.

Denver Tools SC02 1/4-Inch Swivel Connector

The Denver Tools SC02 is a 1/4-Inch Swivel Connector. This connector has a 360 swivel to prevent the air hose from kinking.

Denver Tools 120019 Brad Nailer

The Denver Tools 120021 Brad Nailer drives 18 gauge brad nails from 15mm to 50mm in length. A die cast aluminum body makes this nailer strong and light-weight while a rubber comfort grip handle provides improved control and comfort even during extended use. A touch-strike security system increases safety for the operator and a new 2 spring magizine pushes the nails smoothly. This nailer is ideal for door and window trims, decorative trim, cabinet work, finish paneling, frames and flooring.

Denver Tools 95439 Air Control Unit

The Denver Tools 95439 is an Air Control Unit. This air control unit consists of an air filter, air regulator and an oiler. It helps prevent costly damage to your air tools caused by rust, scale and moisture. It provides clean, dry, regulated air over a wide range of air flows. It is easy to install and maintain.

Denver Tools DBH24 24-Ounce Dead Blow Hammer

The Denver Tools DBH24 is a 24-ounce dead blow hammer. This steel shot filled, bright orange dead blow hammer is an essential part of anyone's toolbox.

Denver Tools ABG2 Air Blow Gun

The Denver Tools ABG2 is an Air Blow Gun featuring a comfortable vinyl coated control lever and durable chrome plated zince cast body.

Denver Tools RBC012 12-Inch Ratchet Bar Clamp

The Denver Tools RBC012 is a 12-Inch Ratchet Bar Clamp. It is a general purpose clamp that can be used on a variety of different tasks around the jobsite and the home.

Denver Tools 650 3/8-Inch Keyless Air Drill

The Denver Tools 650 is a 3/8-Inch Keyless Air Drill with an easily accessible forward/reverse switch making it easy to use with one hand.

Denver Tools AR2 Brass Air Regulator with Gauge

The Denver Tools AR2 is a Brass Air Regulator with Gauge. This regulator and guage allow you to monitor and control the air flow and pressure of your compressor.

Denver Tools 703A 3/8-Inch Driver Air Ratchet Wrench

The Denver Tools 703A is a 3/8-Inch Driver Air Ratchet Wrench.

Denver Tools 113 Air Body Saw (Front Exhaust)

The Denver Tools 113 is a Air Body Saw with Front Exhaust.

Denver Tools DHTCZ-1 Zine Dual Head Tire Chuck

The Denver Tools DHTCZ-1 is a Zine Dual Head Tire Chuck for inflating tires.

Denver Tools TC1 Air Brass Tire Chuck

The Denver Tools TC1 is a Air Brass Tire Chuck. This solid brass air chuck has a standard 1/4-Inch NPT fitting and can be used to inflate various types of tires.

Denver Tools 94346 Mini Air Line Filter

The Denver Tools 94346 is a Mini Air Line Filter. This 40 micron particle filter can operate at up to 135 PSI and 140 degrees Fahrenheit. The reservoir of this filter is made of durable polycarbonate and features a push style drain.

Denver Tools 811B 1/4-Inch Air Die Grinder

The Denver Tools 811B is a 1/4-Inch Air Die Grinder. This powerful air die grinder is compact and lightweight making it easy to use for most grinding, deburring and polishing applications.

Denver Tools ABK2 Professional Air Brush Kit

The Denver Tools ABK2 is a Professional Air Brush Kit. This kit includes everything needed for painting model cars, trains and art detail projects, stenciling, stippling, base coats and much more.

Denver Tools 93703 3 Piece Ratchet Set

The Denver Tools 93703 is a 3 Piece Ratchet Set with 1/4-Inch, 3/8-Inch and 1/2-Inch drives. Each ratchet wrench is 8-Inches long and features a non-slip cushion grip for better grip and comfort.

Denver Tools 19212810 1/2-Inch Electric Impact Wrench

The Denver Tools 12810 is a 1/2-Inch Heavy Duty Industrial Electric Impact Wrench. The 19212810 Electric Impact Wrench has a reversiable 7.5amp moter and rugged die cast aluminum gear housing. A rocker trigger allows for easy one-hand operation.

Denver Tools 417002 3/8-Inch Electric Angle Drill

The Denver Tools 417002 is a 3/8-Inch Electric Angle Drill. This reversible drill features an easy to operate pull on/off paddle switch and a locking mechanism for continuous rotation. The ergonomic design and 55 degree angled chuck this drill easy to use in confined working areas.

Denver Tools 280 Air In-Line Sander

The Denver Tools 280 is an Air In-Line Sander. This in-line sander features a conveinent push trigger on the handle so you don't have to take your hands off the tool to flip a switch. There is also a standard knob in the front of the sander for two handed operation, giving you better control over the movement of the sander.

Denver Tools QC1 5-Piece Brass Quick Coupler Set

The Denver Tools QC1 is a 5-piece set of quick couplers.  These durable brass couplers allow you to easily and quickly connect your air tools to an air hose.

Denver Tools 610003 6 Ton Hydraulic Bottle Jack

The Denver Tools 610003 is a 6 Ton Hydraulic Bottle Jack. This compact jack is durable and easy to use.

Denver Tools 610004 8 Ton Hydraulic Bottle Jack

The Denver Tools 610004 is a 8 Ton Hydraulic Bottle Jack. This compact jack is durable and easy to use.

Denver Tools 610002 4 Ton Hydraulic Bottle Jack

The Denver Tools 610002 is a 4 Ton Hydraulic Bottle Jack. This compact jack is durable and easy to use.

Denver Tools 610001 2 Ton Hydraulic Bottle Jack

The Denver Tools 610001 is a 2 Ton Hydraulic Bottle Jack. This compact jack is durable and easy to use.

Denver Tools MSS10 5 Piece 1/8-Inch Die Grinding Stone Set

The Denver Tools MSS10 is a 5 Piece 1/8-Inch Die Grinding Stone Set with 5 assorted mounted grinding stones.

Denver Tools MSS101 5 Piece 1/4-Inch Die Grinding Stone Set

The Denver Tools MSS101 is a 5 Piece 1/4-Inch Die Grinding Stone Set with 5 assorted mounted grinding stones.

Delta 50-274 Mobile Base for Delta Tools

The Delta 50-274 is a mobile base for delta tools. Delta mobile base provides stationary machines with increased mobility for positioning them at any place, whether its across the shop or out-of-the-way for convenient storage. Delta mobile bases are made of heavy-gage steel and feature a foot-operated control lever that raises and lowers the base for easy movement and positioning.

Denver Tools 613002 2 Ton Engine Crane

The Denver Tools 613002 is a 2 Ton Engine Crane. This engine crane has four settings for half ton, full ton, one and a half ton and two ton loads and features a hydraulic action pump for easy lifting. The legs and easily fold up into the body for easy storage and four caster wheels are attached to the bottom of the main body so it can easily be rolled away.

Denver Tools 170028 Low Pressure Spray Gun

The Denver Tools 170028 Low Pressure Spray Gun may be used at work or home with highly efficient results. This product's high quality is due to the accuracy of each one of its components, as well as the materials composition, such as: treated and stainless steel and aluminum. This gun can be used in several applications, from high viscosity and slow drying paints (enamels), to heavy and quick drying paints (lacquers, synthetic enamels, latex, etc.), and a flexible fan pattern.

KAPRO Layout & Marking Tools

Couldn't find Kapro Toolshere? Are you looking for something else? Search our partner sites:

                                                                                                                            Kapro Tools