Jobsite Equip. & Storage tools and information

Find Jobsite Equip. & Storage at best prices and buy!

Makita MAC5200 Factory Reconditioned 3 HP Air Compressor

Rugged Wheels - Jobsite portabilityBuilt-in Storage Compartment - Conveniently stores air fittings & accessoriesOil Lubricated - Cooler running pump, minimum wearAir Hose Wrap - Stores 50 of 3/8 inch Air Hose with handle folded or uprightTool Hangers - Stores tools when not in useLarge automotive style industrial air filter for increased air intake and greater efficiencyDurable cast iron cylinder reduces wear and increases pump life; removable for easy maintenance

DeWalt DW7450 Table Saw Stand for DW745 Job Site Table Saw

The DW7450 Stand is for use with the DW745 10 Compact Job Site Table Saw. The stand can fold flat for easy storage in the garage or workshop and transporting to and from the jobsite. The stand is made of heavy-duty tube steel construction for maximum durability under load. It comes with built in support bar hardware holes that allow user to secure the saw to the stand.

Bosch 1677MD Factory Reconditioned 7 1/4 Inch Worm Drive Construction Saw

The Bosch 1677MD is a factory reconditioned 7-1/4 inch Worm Drive Construction Saw. The saw features Direct Connect which saves user time and money on jobsite with no end-plug snagging, easy cord repairs and easy tool storage. It has die cast magnesium footplate for greater strength. Anti-snag lower guard to minimize snagging in wood.

Makita MAC5200 3 HP Air Compressor

Rugged Wheels - Jobsite portabilityBuilt-in Storage Compartment - Conveniently stores air fittings & accessoriesOil Lubricated - Cooler running pump, minimum wearAir Hose Wrap - Stores 50 of 3/8 inch Air Hose with handle folded or uprightTool Hangers - Stores tools when not in useLarge automotive style industrial air filter for increased air intake and greater efficiencyDurable cast iron cylinder reduces wear and increases pump life; removable for easy maintenance

Ryobi ZRP841 Factory Reconditioned One+? 18-Volt Cordless 4-Piece Super Combo Kit

If theres anything better than a new tool, its 4 new tools. This handy combination of a drill, 2 saws and flashlight gives you everything you need to get the job done efficiently then clean up afterwards. Each piece is hand-held for versatile use in limited spaces. The included tool bag makes storage and transport to the jobsite hassle-free.

Bosch PB10-CD Factory Reconditioned 12V - 24V Battery Charger / Radio with CD Player

The Bosch PB10-CD is a Factory Reconditioned 12V - 24V Battery Charger / Radio with CD Player. The heavy-duty 180 flexible rubber antenna boosts reception yet can still be folded to stay protected within the Power Boxs protective roll cage. The remote controls channel, volume, CD player, mute, function and power and simply clicks into top magnetic storage on the Power Box. Best of all, the new and improved sound system delivers clearer, bolder sound from the jobsite radio due to more powerful amplifier, premium speakers, an upgraded sound board, individual bass and treble control, an upgraded volume control and improved anti-skip technology. The ergonomic design enables simple one-handed or gloved use. And the keychain attachment adds convenience while preventing loss. Advances in reception and sound continue to make the Power Box the best jobsite option.

Mantis® 811005 Tiller Storage Rack

Hang your Mantis® Tiller safely, securely, and out of the way in your garage or shed. Includes seven pegboard hooks for convenient attachment storage. Includes all necessary hardware for easy installation.

DeWalt DC022R Factory Reconditioned DC022 Cordless/Corded Worklight with Dual-Port Battery Charger, 38 Watt, 12V to 18V

The DeWalt DC022 is a Heavy-Duty Cordless/Corded Worklight With Dual Port Battery Charger. The cordless/corded 38W fluorescent worklight runs on 12-18V DeWalt batteries or AC power and provides area lighting without the extreme heat of halogen. It has a built-in 1 hour dual port battery charger which charges (2) DeWalt 7.2-18V batteries in one hour or less. It features (3) GFCI protected power outlets which offers more versatility for jobsite power. A spring loaded battery hold down keeps batteries in place when transporting from place to place. Its compact design provides quick and easy fold-up, transport and storage.

Stack-on BIN-6, Storage Bin 6 Pack

Molded plastic bins are removable for filling or cleaning, and tilt out 45 degrees for easy accessRugged co-polymer constructionWide front openings for easy access and greater visiblityBins stack together for storage or can nest for transporting or when emptyDimensions 4-1/8W X 5-1/4D X 2-1/8HDoes not include tools

Streamline GT005 Stainless Steel Rolling Storage Locker

-5.5 foot tall storage locker with 3 adjustable shelves. Heavy Gauge beveled stainless steel front doors. Comes locks and 5" casters casters. Black powder coated rolled steel side walls and shelves.

Porter-Cable 77249 Accessory Storage Case for the Omnijig Joinery Systems

The Porter Cable 77249 is an Accessory Storage Case. The Porter Cable 77249 provides a single point of storage for Omnijig Joinery System accessory parts such as Omnijig set-up guides, template positioning stops, depth gauges, router bits, and template guides. The 77249 Accessory Storage Case attaches directly to the back of the Omnijig to provide easy access to accessories and set-up instructions and minimizes storage space required when not in use.

Streamline GT100 Garage Storage System

-18 Gauge Heavy Duty Stainless Steel make this system tough enough to stand up to anything while give you the classic look that only brushed stainless steel can give.

Stack-On® GMB26RPS/4 26Inch Deluxe Professional Tool Box with Removable Parts Storage

Increased wall thickness in the body and lid.Removable parts storage boxes can be configured into 13 different compartments and are accessible while positioned in the lid. Full length steel hinge pins.Steel latches. Steel riveted handle hold down.Dimensions 26W x 10-1/2D x 10H (66cm x 27cm x 25cm)

Stack-On® DS18, 18 Drawer Storage Cabinet

-Contemporary, heavy-duty cabinet design for storing a wide variety of parts and supplies - easily mounts to wall or stands alone-Wide frame and horizontal/vertical supports for strength, rigidity and improved drawer action-Clear, see-through drawers with large, ribbed drawer pulls for easy access to contents - drawer stop tabs prevent spills

Stack-On DS39 39 Drawer Storage Cabinet

-Contemporary, heavy-duty cabinet design for storing a wide variety of parts and supplies - easily mounts to wall or stands alone-Wide frame and horizontal/vertical supports for strength, rigidity and improved drawer action-Smokie clear, see-through drawers with large, ribbed drawer pulls for easy access to contents - drawer stop tabs prevent spills

Stack-On® DS60 60 Drawer Storage Cabinet

-Contemporary, heavy-duty cabinet design for storing a wide variety of parts and supplies - easily mounts to wall or stands alone-Wide frame and horizontal/vertical supports for strength, rigidity and improved drawer action-Clear, see-through drawers with large, ribbed drawer pulls for easy access to contents - drawer stop tabs prevent spills

DeWalt D55141 Heavy-Duty 2 Gallon Trim Compressor, 150 PSI Max, 2200 RPM

The DeWalt D55141 is a Heavy-Duty 2 Gallon, 150 PSI Max Trim Compressor. The durable oil free pump provides extended maintenance-free operation and low 79 dBA allows for quieter operation. Finish woodworkers and carpenters can use the D55141 to complete custom and exterior trim, while other tradesmen will find it useful in a number of non-trim applications. For increased performance, the compressor produces 2.0 SCFM at 90 PSI, 150 PSI Max and provides users with a low noise operation at 79 dBA. It is also equipped with an oil-free pump, allowing for maintenance-free operation. The long-life pump delivers surge performance with quick recovery and the oil-free design also increases productivity by eliminating the need for users to check or refill the pump. Additionally, the oil-free pump helps to keep the jobsite clean, preventing oil from transferring to work surfaces. The motor is also equipped with a high flow regulator that delivers maximum air pressure, increasing performance on the jobsite. For increased efficiency it is equipped with the easy-to-use dual, quick couplers, allowing multiple nailer operations at the same time. The compressor also features a ball drain valve for quick and thorough tank draining and a convenient cord wrap for quick, easy storage. It is built with an innovative roll cage, full-protection frame design to shield the unit from accidental damage and routine wear and tear. The wrap-around control panel that covers the frame also provides further protection to key components of the compressor.

DeWalt DW745R Factory Reconditioned DW745 Heavy-Duty 10-Inch Compact Job Site Table Saw

The DeWalt DW745 is a Factory Reconditioned Heavy-Duty 10 Compact Jobsite Table Saw. It is loaded with features that many saws in its class dont have. The compact design allows for rip capacity up to 16 and offers a patented telescoping rack and pinion fence to help maintain the accuracy of the fence to the blade. And for jobsite durability the saw boasts a metal roll cage with rubber feet to withstand the rigors of heavy-duty jobsite usage.

DeWalt D55140 Heavy-Duty 1 Gallon Trim Compressor, 120V, 2200 RPM

The DeWalt D55140 is a Heavy-Duty 1 Gallon, 135 PSI Max Trim Compressor. The durable oil free pump provides extended maintenance-free operation and low 71 dBA allows for quieter operation. It is ideal for finish carpenters and woodworkers. The D55140 can be used for custom installation of shelves or other furniture, cabinet trim installation and for pressure-testing new plumbing lines. It is also equipped with an oil-free, long-life pump, allowing for maintenance-free operation. The oil-free design of the pump eliminates the need for users to check or refill the pump and also helps to keep the jobsite clean by preventing oil from transferring to work surfaces. The compact design of this unit is ideal for end users who prefer hand carry compressors. The compressor is easily transported and stored, making it ideal for knock-out work. For increased efficiency, it is designed with a ball drain valve for quick and thorough tank draining and a convenient cord wrap for easy storage. The efficient and unique design of the D55140 ensures maximum durability and longevity. DeWalt built the heavy-duty compressor with an innovative roll cage, full-protection frame design to shield the unit from routine wear and tear and accidental damage. In addition, a wrap-around control panel covers the frame and provides further protection to key components of the compressor.

DeWalt D55140R Factory Reconditioned D55140 1-Gallon Trim Compressor, 135-PSI Maximum, 2200 RPM

The DeWalt D55140 is a Factory Reconditioned Heavy-Duty 1-Gallon, 135 PSI Max Trim Compressor. The durable oil free pump provides extended maintenance-free operation and low 71 dBA allows for quieter operation. It is ideal for finish carpenters and woodworkers. The D55140 can be used for custom installation of shelves or other furniture, cabinet trim installation and for pressure-testing new plumbing lines. It is also equipped with an oil-free, long-life pump, allowing for maintenance-free operation. The oil-free design of the pump eliminates the need for users to check or refill the pump and also helps to keep the jobsite clean by preventing oil from transferring to work surfaces. The compact design of this unit is ideal for end users who prefer hand carry compressors. The compressor is easily transported and stored, making it ideal for knock-out work. For increased efficiency, it is designed with a ball drain valve for quick and thorough tank draining and a convenient cord wrap for easy storage. The efficient and unique design of the D55140 ensures maximum durability and longevity. DeWalt built the heavy-duty compressor with an innovative roll cage, full-protection frame design to shield the unit from routine wear and tear and accidental damage. In addition, a wrap-around control panel covers the frame and provides further protection to key components of the compressor.

Bostitch F28WW Factory Reconditioned 2Inch to 3-1/2Inch Industrial Stick Framing Nailer, 1050 in-lbs

The Bostitch F28WW, Factory Reconditioned, Industrial Stick Framing Nailer serves two purposes; framing and metal connecting. With a driving torque of 1050 Inch Lbs. this little monster fires a 28-degree wire collated full round head stick nail to a depth of 2 to 3 ½ inches to fasten. Bostictch F28WW boasts of patented push button that enables setting the depth of the impact, this gives a user the freedom to adjust the depth of nailing entirely depending on the requirement. For easy storage when not in use, this heavy-duty nailer features an adjustable rafter hook. You can just hang the nailer from a rafter or joist and leave it at the jobsite without worrying about its damage. The lightweight magnesium design of this 7.6 lbs nailer makes porting easy and non-strenuous. This power nailer features specially designed aggressive teeth, particularly to ease the toe nailing process so that you can join two pieces with minimal effort. Applicable for framing, sheathing, installing metal connectors and more the Bostitch F28WW can be branded as the ideal nailer that can take care of multiple applications all by itself.

DeWalt D28770KR Factory Reconditioned D28770K Heavy-Duty 4-3/4 Inch Deep Cut Variable Speed Band Saw Kit

The DeWalt D28770K is a factory reconditioned heavy-duty deep cut variable speed band saw kit. 1/2 of rugged industrial rubber and a steel belt wrap around the tool, protects it from jobsite wear and tear.

Alltrade 835937 45-Piece Tool Set with Plastic Case

The Alltrade 835937 45-Piece Tool Set is a great tool set to have around the house or on the jobsite. It has a variety of screwdrivers and pliers and all the other tidbits to get your job done.

Streamline GT001 Stainless Steel Wall Cabinet Storage Unit

-18 gauge 304 stainless steel wall mounted cabinet with one shelf. Heavy duty yet classically sharp design will add utility and grace to your work area.

DeWalt D51180 Heavy-Duty Palm Nailer

The DeWalt D51180 Heavy-Duty Palm Nailer features a lightweight (2.65 lbs) compact design that will drive all required jobsite fasteners (6d - 16d bulk nails) with ease. The nailers full metal housing will withstand most jobsite abuse, while the leather comfort grip helps reduce vibration and prevent slipping during applications. In addition, the magnetic tip allows for easy nail placement in tight spaces.

Stout X-Band Cutting Station ST-CS250

-The Ultimate Cutting Station converts the X-Band saw into a bench top stationary cutting sensation-Takes the work out of any cutting project-Safe, easy on the hands-Cut materials without ever picking up a tool-Easy transport to jobsite, workshop or garage-No vise required-Perfect for the do-it-your-selfer, homeowner, hobbyist, crafter, mechanic, fabricator, handyman or contractor-Ideal for home repair and home improvement-Welcome addition to the home or jobsite

DeWalt D55575R Factory Reconditioned D55575 1.5 HP 17-Gallon Electric Wheeled Portable Compressor with Dual Voltage and Dual Control

The DeWalt D55575 Factory Reconditioned Heavy-Duty Compressor is made for the professional grade. It is designed with a twin cylinder, cast iron, oil lubricated pump which comes with Emglos 50 years of proven durability and reliability. Its dual wheels make for easier manuevering on the jobsite and helps save you from back pain.

Bostitch BT200K-2 Factory Reconditioned 5/8Inch to 2Inch Oil-Free Brad Nailer Kit, 18 Gauge

The Bostitch BT200K-2 is a Factory Reconditioned 18 Gauge 5/8 to 2 Oil-Free Brad Nailer Kit. This lightweight tool has magnesium housing for jobsite durability. The oil-free operation prevents stains on work piece. It has ultra-quiet rear exhaust and open nose design for easy jam clearing.

Bostitch N88RH Factory Reconditioned Industrial Round Head Stick Framing Nailer, 70-120 PSI

The Bostitch N88RH is a Factory Reconditioned Industrial Round Head Stick Framing Nailer. It has 1000 in-lbs of driving power to tackle tough engineered lumber applications with lightweight magnesium housing for jobsite durability. The patented push-button depth control is for quick flush nailing adjustments.

Makita 5007MGX 7 1/4 Inch Magnesium Circular Saw With Carpenters Tool Belt

Magnesium components create a lightweight saw that is well-balanced and jobsite toughMake quick, one-handed adjustments using large, rubberized leversBetter fit and more control with comfortable rubber grip on handleSettings are easy to read with oversized number and ruler markingsLarge cutting capacity and bevel capacity with positive stops at 22.5and 45Two built-in L.E.D. lights illuminates the line of cut for increased accuracyBuilt-in dust blower enhances the line of cutBlade wrench is attached to saw for fast and convenient blade changingReinforced power cord withstands jobsite abuse and lowers repair costsIncludes a premium 7-1/4 carbide-tipped framing blade that cuts 50% faster and lasts 2x longer

DeWalt DW099 3-Beam Laser Level

The DW099 3-beam torpedo laser level is a manual leveling laser tool that can be used primarily inside for horizontal (level), vertical (plumb) and square alignment projects. The tool has been designed to save time and increase production on the jobsite, utilizing a standard carpenters level with a laser that is quick and easy to use. It is highlighted by a durable, aluminum-extruded housing and jobsite tough on/off switch. In addition, the DW099 has a strong magnetic base that allows the laser to function on any metal surface. It is accurate within 1/4 @ 75 and comes standard with a leveling base accessory for leveling on uneven surfaces. The compact 3-beam torpedo laser level includes the leveling base and instruction manual.

DeWalt DW745 10Inch Compact Job Site Table Saw, 15 Amps, 3850 RPM

The DeWalt DW745 is a 10 Compact Job Site Table Saw. The 24T carbide blade enhances cut quality and prolongs blade life. Dust port allows for 2-1/2 vacuum hook up and minimizes clean up. Its adjustable rear feet are designed to level the saw on uneven work surfaces. The compact design allows for rip capacity up to 16 and offers a patented telescoping rack and pinion fence to help maintain the accuracy of the fence to the blade. And for jobsite durability the saw boasts a metal roll cage with rubber feet to withstand the rigors of heavy-duty jobsite usage.

Ernst 5090 12-Slot Screwdriver Tray

12 slot screwdriver storage tray

Jet 708315LSB 15AMP 10Inch Benchtop Table Saw W/ Stand and Storage Shelf

-This JET 10 Bench Top Tablesaw has an exclusive design with heavy constructed side panels and steel corner posts for tough applications. The saw is powered by a 15 amp motor that runs a Smooth Speed belt drive to the blade to eliminate blade vibration and extend the life of the motor along with providing quieter operation and beter transfer of power.

Bessey D-BKPH Quick-Change Folding Utility Knife with PVC Handle and 5-Blade Storage Compartment

The Bessey D-BKPH is a folding utility knife. The Bessey D-BKPH Folding Utility Knife has unlimited uses and is extremely easy and convenient to use.

DeWalt D28770 Heavy-Duty 6 Amp 4-3/4-Inch By 4-3/4-Inch Capacity Variable Speed Portable Band Saw

The Dewalt D28770 band saw is one most reached for tools on any jobsite, so DeWalt packed this deep cut, portable workhorse for power, accuracy, and versatility. A burly, 6 amp motor is designed to withstand heavy-duty cutting applications. Protective rubber bumpers keep the tool safe on the toughest jobsite. A lightweight and well-balanced design means easy handling. An innovative sight-light illuminates the cut line in any jobsite environment. And, an integrated hang hook makes it easy to hang the saw without damaging the front handle or castings. It's easy to cut through round or rectangular stock thanks to this saw's 4-3/4-inch cut capacity. Dual bearing blade guide rollers fortify the blade support system for thicker cuts. And, this versatile workhorse is equipped with an adjustable material guide for quick and easy cutting of odd-size stock. Variable speeds make it easy to match the tool speed to any job. A large front handle offers more hand space and dynamic control, and an ergonomic, soft-grip, back handle means more comfort and better handling. All features within arm's reach means much less downtime.

DeWalt DW087KR Factory Reconditioned DW087K Self-Leveling Horizontal And Vertical Line Laser

The DW087K self-leveling line laser is ideal for horizontal (level) AND vertical (plumb) interior applications. This laser is designed to provide the professional user with maximum durability as well as the easiest to operate self-leveling laser on the market. The DW087K comes standard with a magnetic pivot bracket for nearly 360 operation and attaches to any metal surface. It has been designed to save you time and increase production on the jobsite, utilizing a one-button operation that is quick and easy to use. It is highlighted by a full over-molded housing that helps maintain calibration under rigorous jobsite conditions. It is self-leveling within 4 degrees, accurate within +/- 1/8" @ 30' and has an out of level indicator in which the beams flash when out of level. In addition, the DW087K comes with a universal wall mount, allowing the user to attach the laser mount to track for drop ceilings and/or wood surfaces for residential applications.

Makita LS1040F 10 inch Compound Miter Saw with Fluorescent Light, 4600 RPM, 15.0 Amps

The Makita LS1040F 10 inch compound miter saw is truly the most favorite jobsite saw around. The saw is equipped with a flexible fluorescent lamp that eliminates the work area giving better visibility for more accurate cuts. It features dual post compound pivoting arm. The saw can perform almost any compound cutting operations. The saw has cutting capacity of bevel cut up to 45 to the left and miter cut 0 to 45 left, 0 to 52 right.

DeWalt DW1800 Hole Saw Mandrel

The 1/4 round shank mandrel is used with 1/4 or larger chuck capacity and 9/16 to 1-3/16 hole saw. The primary application of a holesaw is to install pipe, copper tubing or PVC. The quick change mandrel features double set screws with a recessed combination head for quick and easy centering bit changes. It utilize hardened steel construction and have been tested through 15000+ cycles to deliver jobsite durability.

DeWalt DW3184 8-1/4Inch 40 Teeth Carbide Tipped Circular Saw Blade

The DeWalt DW3184 is a 8-1/4" 40 Teeth Carbide Tipped Thin Kerf Circular Saw Blade. This is series 20 construction designed to deliver the cut quality, speed and durability to stand up to the toughest jobsite use. It has exclusive wedge shoulder for increased durability. The patented ribbed heat vents eliminate blade flexing and binding for long lasting performance.

DeWalt DC410KB Heavy-Duty 4-1/2 inch 18 Volt Cordless Cut-Off Tool, 6500 RPM - Tool Only

The DeWalt DC410KB is a bare Small Angle Grinder (SAG), designed to be the most powerful tool of its type on the market. With its high power and torque, plus an outstanding combination of runtime, versatility, durability and ease-of-use, the DC410 will meet the demands of a wide range of professional users and applications. The DC410 also excels in bringing versatility to the jobsite by offering a keyless guard for quick adjustment.

DeWalt DW7187 Heavy-Duty Adjustable Miter Saw Laser System

The DW7187 Adjustable Miter Saw Laser System was designed for the professional miter saw user and will only fit the DeWalt DW715, DW716 & DW718 12 Miter Saws. The laser module mounts on the upper guard of the miter saw and the power supply, which delivers the ability for the laser to be turned on and off independent of blade rotation, mounts behind the saws handle. The laser is encased in a durable protected housing designed to meet the demands of the jobsite and shop.

DeWalt DC528 Heavy-Duty 14.4V/12V Cordless Fluorescent Area Light - Tool Only

The DeWalt DC528 is a Heavy-Duty 14.4V/12V Cordless Fluorescent Area Light Tool Only. It has built-in telescoping and 360 rotating hook allows unit to hang from 2 inch materials and multiple locations. Over-molded lens cover provides increased durability on the jobsite. The 13 Watts fluorescent bulb provides bright area lighting. Its twist & lock tool-free lens cover allows for quick and easy bulb change.

DeWalt DW3182 8-1/4Inch 24 Teeth Carbide Framing Circular Saw Blade

The DeWalt DW3182 is a 8-1/4" 24 Teeth Carbide Framing Circular Saw Blade. The Series 20 construction designed blade is made to deliver the cut quality, speed and durability to stand up to the toughest jobsite use. It has thin-kerf for fast, smooth cuts and exclusive wedge shoulder for increased durability. Patented ribbed heat vents eliminate blade flexing and binding for long lasting performance.

DeWalt DC410KAR Factory Reconditioned DC410KA 4-1/2 Inch 18-Volt Cordless Cut-Off Tool, 6500 RPM

The DeWalt DC410KA is a factory reconditioned Small Angle Grinder (SAG), designed to be the most powerful tool of its type on the market. With its high power and torque, plus an outstanding combination of runtime, versatility, durability and ease-of-use, the DC410 will meet the demands of a wide range of professional users and applications. The DC410 excels in bringing versatility to the jobsite by offering a keyless guard for quick adjustment, a 90 rotating head for permanent cutting comfort.

DeWalt DC410KA Heavy-Duty 4-1/2 inch 18V Cordless Cut-Off Tool, 6500 RPM

The DeWalt DC410KA is a Small Angle Grinder (SAG), designed to be the most powerful tool of its type on the market. With its high power and torque, plus an outstanding combination of runtime, versatility, durability and ease-of-use. The DC410 will meet the demands of a wide range of professional users and applications. The DC410 excels in bringing versatility to the jobsite by offering a keyless guard for quick adjustment, a 90 rotating head for permanent cutting comfort.

DeWalt DW140 Heavy-Duty 1/2Inch End Handle Drill, 600 RPM, 7.0 Amps

-100% ball-bearing construction provides durability and longer tool life-Die-cast metal gear housing for jobsite durability and tool reliability-3-position auxiliary side handle for greater control in all drilling applications-Triple gear reduction provides increased torque and reduces gear stress-D-handle design is ideal for drilling applications where added pressure in needed

DeWalt DW7440RS Table Saw Rolling Stand

The DeWalt DW7440RS Table Saw Rolling Stand can be used with jobsite table saws weighing up to 200 pounds, allowing you to easily move your saw from job site to job site without spending a lot of time setting up and breaking down. This rolling stand can also be used in workshops with limited space.

DeWalt DW1803 7/16Inch Quick Change Mandrel

The DeWalt DW1803 is a 7/16 Quick Change Mandrel which fits hole saws from 1-1/4 to 6. It offers spring-loaded collar that automatically engages drive pins to prevent hole saws from locking to the mandrel. It features double set screws with a recessed combination head for quick and easy centering bit changes. It utilizes hardened steel construction and has been tested through 15000+ cycles to deliver jobsite durability.

Bosch HS1911 SDS-Max Shank 1 inch x 12 inch Flat Chisel

The Bosch HS1911 is a SDS-Max Shank 1 inch x 12 inch Flat Chisel. Boschs R-Tec reflection point is featured on HS1903 and HS1904. When energy is dispersed with each beat of the hammer, the new R-Tec point reflects the hammers energy back into the work material, increasing the rate of removal by 15%. The result is faster demolition which increases overall jobsite productivity and profitability.

JOBOX Job Site Drop-Front Piano Box

Couldn't find Jobsite Equip. & Storagehere? Are you looking for something else? Search our partner sites: