International Tool Boxes                                                                                                                                    

International Tool Boxes tools and information

Find International Tool Boxes at best prices and buy!

Performance W88996 16Inch X 96Inch Tool Box Drawer Liner

TOOL BOX DRAWER LINER EASY TO CUT TO FIT 16 X 96 X 1/16 Durable tear resistant material for rugged use and long life Helps protect tools and tool boxes from rust, scratches, sliding and permanent damage

Ernst 5010 11Inch x 16Inch Ten Compartment Tool Tray

Versatile storage for parts and tools Conveniently holds nuts, bolt screws, etc. Great for sockets, vise grips, pliers, etc. Fits tool boxes, shelves and work benches Stackable design 11 x 16 tray with 10 compartments. Red.

Paslode 219090 8-Ounce Bottle of Pneumatic Tool Lubricating Oil - Cold Weather Formula (Below 32° F)

The Paslode 219090 Cold-Weather Formula Lubricating Oil works on all Paslode pneumatic tools. Paslode recommends using 6-20 drops of oil per day of use depending on the work environment to keep your air tools working properly. The 219090 Cold-Weather Formula is only meant for use in temperatures below 32 F. Attention International Customers Paslode products cannot be shipped outside of the USA.

DeWalt DW1614 1/2Inch x 12Inch Black Oxide Drill Bit

The DeWalt DW1614 is a 1/2" x 12" Black Oxide Drill Bit. The 12" black oxide drill bit is ideal for drilling in hard to reach areas, in materials such as non-ferrous metal, wood and plastic. Because of the wide variety of applications covered, the 12" black oxide drill bit is found in most residential and commercial tool boxes.

DeWalt DW1608 5/16Inch x 12Inch Black Oxide Drill Bit

The DeWalt DW1608 is a 5/16" x 12" Black Oxide Drill Bit. The 12" black oxide drill bit is ideal for drilling in hard to reach areas, in materials such as non-ferrous metal, wood and plastic. Because of the wide variety of applications covered, the 12" black oxide drill bit is found in most residential and commercial tool boxes.

DeWalt DW1602 1/8Inch x 12Inch Black Oxide Drill Bit

The DeWalt DW1602 is a 1/8" x 12" Black Oxide Drill Bit. The 12" black oxide drill bit is ideal for drilling in hard to reach areas, in materials such as non-ferrous metal, wood and plastic. Because of the wide variety of applications covered, the 12" black oxide drill bit is found in most residential and commercial tool boxes.

DeWalt DW1606 1/4Inch x 12Inch Black Oxide Drill Bit

The DeWalt DW1606 is a 1/4" x 12" Black Oxide Drill Bit. The 12" black oxide drill bit is ideal for drilling in hard to reach areas, in materials such as non-ferrous metal, wood and plastic. Because of the wide variety of applications covered, the 12" black oxide drill bit is found in most residential and commercial tool boxes.

DeWalt DW1604 3/16Inch x 12Inch Black Oxide Drill Bit

The DeWalt DW1604 is a 3/16" x 12" Black Oxide Drill Bit. The 12" black oxide drill bit is ideal for drilling in hard to reach areas, in materials such as non-ferrous metal, wood and plastic. Because of the wide variety of applications covered, the 12" black oxide drill bit is found in most residential and commercial tool boxes.

DeWalt DW1610 3/8Inch x 12Inch Black Oxide Drill Bit

The DeWalt DW1610 is a 3/8" x 12" Black Oxide Drill Bit. The 12" black oxide drill bit is ideal for drilling in hard to reach areas, in materials such as non-ferrous metal, wood and plastic. Because of the wide variety of applications covered, the 12" black oxide drill bit is found in most residential and commercial tool boxes.

Milwaukee 0627-84E Factory Reconditioned 18-Volt 1/2-Inch Cordless Hammer Drill Kit and 220V European Charger

The Milwaukee 0627-84E is a Factory Reconditioned 18-Volt 1/2-Inch Cordless Hammer Drill Kit. The rugged Lok-Tor series drill delivers high torque, long run-time and the increased durability and quality. It features an exclusive all-metal, single-sleeve ratcheting chuck with carbide jaws to provide high grip torque on bits. A new Milwaukee-built high efficiency motor delivers up to 495 in-lbs of torque. The high efficiency motor and superior battery technology combine to provide the ultimate run-time.We at Tool King are excited to present this kit for the first time with a 220V European charger for our international customers.

Paslode 501230 S200-S16P 16-Gauge Pneumatic Standard Crown Stapler

Let the Paslode 501230 S200-S16P Pneumatic Standard Crown Stapler be your go-to tool for floor decking, vinyl siding, insulation installation, or roof, soft wall, and plywood sheathing. The S200-S16P can handle anything. And you can handle it. Its lightweight to help prevent you from getting fatigued. The S200-S16P Pneumatic Crown Stapler also has a quick-clear feature so you can take care of any jams that may occur in the magazine and move on to the next task. Attention International Customers Paslode products cannot be shipped outside of the USA.

DeWalt DW087K Self-Leveling Line Laser (Horizontal & Vertical)

The DeWalt DW087K self-leveling line laser is accurate to +/- 1/8 @ 30 for level applications and is self-leveling within 4. The magnetic pivot bracket in the DeWalt DW087K helps the laser attach itself to any metal surface to exploit nearly 360 operation. In addition, the DeWalt DW087K comes with a universal wall mount as well. Designed to save time on the jobsite, the laser has a one-button operation. The DeWalt DW087K self-leveling line laser works great for hanging items or for mounting boxes, steel framing walls, ceilings and trim setting cabinets. The full over-molded housing of DeWalt DW087K ensures durability in the harsh jobsites. It has an out of level indicator in which the beams flash when the line laser is out of level. The tool can easily take care of leveling requirements for steel framing in walls, ceilings, soffits, and trim work in setting cabinets and aligning head casings. The kit includes line laser, kit box and 3 AA batteries.

Flex BHW812VV 2-Speed Electronic Wet Handled Core Drill, 0-3800 RPM, 13.0 Amps

The Flex BHW812VV is a 2-Speed Electronic Wet Handled Core Drill. The drill has 13 Amp motor and infinitely adjustable speeds of 0-3800 RPM. The wet core drill is designed for drilling in concrete, natural stone (without hammer action) for electric boxes, fireplace connections, junction boxes and conduits. It is also ideal for precision drilling when securing heavy-load anchors. The nonhammering core drilling method allows for precise and fast drilling even in reinforced concrete. The Flex five-fold VV electronic control gives consistent speed control, soft start with acceleration trigger, overload protection, temperature monitoring and speed pre-selection. It features two-gear transmission for speed-compatible working. The additional rotating auxiliary handle with stops prevents turning. Not for use on masonry or asphalt.Please note that the hose assembly is NOT included in the BHW812VV. The hose is sold separately.

Amana 53610 Box Joint Router Bit - 3-Wing, Ball Bearing Guide, 1/2Inch Shank, 5/32Inch Kerf

For producing jewelry boxes, drawers, etc. Recommended stock thickness 3/4 - 1-5/8. For material over 1-5/8, two passes will accomplish joints up to 3.Use #47708 replacement bearing 1/2 shank. 3-Wing. Diameter 1-7/8, kerf 5/32, depth of cut 1/2 Flute length 1-3/8, overall length 3-3/4 Includes cutters, spacers, arbor, and ball bearing

DeWalt DW6605 1/8Inch 10-Pc Piloted Drywall Bit Set

The DeWalt DW6605 is a 1/8 10-Pc Piloted Drywall Bit Set. These bits have one flute design which provides increased chip clearance for fast cutting. Left-hand spiral directs chips and dust into wall cavity for a cleaner work environment. These piloted bits allows for effective cutting around outlet boxes and other objects.

Little Wonder 3010-00-01 30Inch 120V Single Sided Electric Hedge Trimmer

The Little Wonder 3010-00-01 is a 30 120V Single Sided Electric Hedge Trimmer. The trimmer has a stamped thru-hardened high carbon tool steel blades maintain a sharp edge for longer periods of time. This means less downtime for maintenance. The blade lasts 6-10 times longer than other steel blades. The trimmer has double reciprocating blades for reduced vibration and heavier cuts. It has case hardened steel gears for durability and longer life. Angled gear teeth transmit greater torque for more power from the motor to the blades. Motor stops in less than 1/2 second if either switch is released. Meets or exceeds international safety standards. It has a cord management system molded into the rear handle hook, which keeps the extension cord from coming unplugged during operation. Brush cap and gear case covers remove easily for maintenance.

Little Wonder 2410-00-01 24Inch 120V Single Sided Electric Hedge Trimmer

The Little Wonder 2410-00-01 is a 24 120V Single Sided Electric Hedge Trimmer. The trimmer has a stamped thru-hardened high carbon tool steel blades maintain a sharp edge for longer periods of time. This means less downtime for maintenance. The blade lasts 6-10 times longer than other steel blades. The trimmer has double reciprocating blades for reduced vibration and heavier cuts. It has case hardened steel gears for durability and longer life. Angled gear teeth transmit greater torque for more power from the motor to the blades. Motor stops in less than 1/2 second if either switch is released. Meets or exceeds international safety standards. It has a cord management system molded into the rear handle hook, which keeps the extension cord from coming unplugged during operation. Brush cap and gear case covers remove easily for maintenance.

Little Wonder 2420-00-01 24Inch 120V Double Sided Electric Hedge Trimmer

The Little Wonder 2420-00-01 is a 24 120V Double Sided Electric Hedge Trimmer. The trimmer has a stamped thru-hardened high carbon tool steel blades maintain a sharp edge for longer periods of time. This means less downtime for maintenance. The blade lasts 6-10 times longer than other steel blades. The trimmer has double reciprocating blades for reduced vibration and heavier cuts. It has case hardened steel gears for durability and longer life. Angled gear teeth transmit greater torque for more power from the motor to the blades. Motor stops in less than 1/2 second if either switch is released. Meets or exceeds international safety standards. It has a cord management system molded into the rear handle hook, which keeps the extension cord from coming unplugged during operation. Brush cap and gear case covers remove easily for maintenance.

Little Wonder 3020-00-01 30Inch 120V Double Sided Electric Hedge Trimmer

The Little Wonder 3020-00-01 is a 30 120V Double Sided Electric Hedge Trimmer. The trimmer has a stamped thru-hardened high carbon tool steel blades maintain a sharp edge for longer periods of time. This means less downtime for maintenance. The blade lasts 6-10 times longer than other steel blades. The trimmer has double reciprocating blades for reduced vibration and heavier cuts. It has case hardened steel gears for durability and longer life. Angled gear teeth transmit greater torque for more power from the motor to the blades. Motor stops in less than 1/2 second if either switch is released. Meets or exceeds international safety standards. It has a cord management system molded into the rear handle hook, which keeps the extension cord from coming unplugged during operation. Brush cap and gear case covers remove easily for maintenance.

Little Wonder 1920-00-01 19Inch 120V Double Sided Electric Hedge Trimmer

The Little Wonder 1920-00-01 is a 19 120V Double Sided Electric Hedge Trimmer. The trimmer has a stamped thru-hardened high carbon tool steel blades maintain a sharp edge for longer periods of time. This means less downtime for maintenance. The blade lasts 6-10 times longer than other steel blades. The trimmer has double reciprocating blades for reduced vibration and heavier cuts. It has case hardened steel gears for durability and longer life. Angled gear teeth transmit greater torque for more power from the motor to the blades. Motor stops in less than 1/2 second if either switch is released. Meets or exceeds international safety standards. It has a cord management system molded into the rear handle hook, which keeps the extension cord from coming unplugged during operation. Brush cap and gear case covers remove easily for maintenance.

Little Wonder 1910-00-01 19Inch 120V Single Sided Electric Hedge Trimmer

The Little Wonder 1910-00-01 is a 19 120V Single Sided Electric Hedge Trimmer. The trimmer has a stamped thru-hardened high carbon tool steel blades maintain a sharp edge for longer periods of time. This means less downtime for maintenance. The blade lasts 6-10 times longer than other steel blades. The trimmer has double reciprocating blades for reduced vibration and heavier cuts. It has case hardened steel gears for durability and longer life. Angled gear teeth transmit greater torque for more power from the motor to the blades. Motor stops in less than 1/2 second if either switch is released. Meets or exceeds international safety standards. It has a cord management system molded into the rear handle hook, which keeps the extension cord from coming unplugged during operation. Brush cap and gear case covers remove easily for maintenance.

SPX OTC 7246 Adjustable Spanner Wrench

Ideal for adjusting pillow block bearings. Also works well on International model M water pump or power takeoff on all IHC tractor models.

Milwaukee 0824-24VE 18V Hammer Drill Kit with Free 0880-20 Vacuum and 220V European Charger

0824-24 Hammer Drill Kit:The Milwaukee 0824-24 V18? Hammer Drill with its Li-ion battery cuts up to 25 2-9/16 Inch selfeed bit holes per charge. High output motor provides 550 in-lbs. of torque. Patented reversible battery allows drill to fit in tight areas and optimizes balance while working overhead. 1/2 in. metal ratcheting chuck with carbide jaws provides superior bit grip. The European Li-ion/NiCd Charger will charge any 18V to 28V Milwaukee Battery in 1 hour or less. Tool is backwards compatible with existing Milwaukee NiCd 18V Batteries.We at Tool King are pleased to introduce this kit with a 220-Volt charger for our International customers0880-20 Vacuum:Working on all Milwaukee 18V? slide-on batteries, Li-ion or NiCd, the 0880-20 wet/dry vacuum offers long continuous run time and high air power and suction to provide quick and easy removal of dust, debris and water. A washable, reusable wet/dry filter delivers excellent fine dust collection and does not need to be changed between wet and dry applications. The stackable toolbox design, on-board hose and accessory storage offer excellent portability and convenience, a built-in blower port allows the vacuum to double as a blower, and the 1-" hose allows standard vacuum attachments to be fastened. It includes vacuum, filter, hose, a crevice tool, and a wide nozzle.

Kreg SPS-C1-100 1Inch #7 Coarse Thread #2 Square Pan Head Screws - 100 ct.

#2 square drive. Deep recess, pan head of this screw provides excellent driver engagement and is popular in building drawer boxes from 1/2 plywood. Works well in 1/2 thick, softer materials such as plywoods and composites Features a type 17 auger tip that self-taps its own hole, eliminating the need to predrill in even the hardest materials Bronze colored finish and a dry-lubricant coating that eases driving torque and provides greater rust resistance Kreg screws have larger diameter steel shanks than many other screws on the market today making for an impressively strong screw that is almost impossible to break Includes 100 screws

Paslode 902000F Factory Reconditioned IM250II 16-Gauge Cordless Straight Finish Nailer with Impulse Technology

When operating this tool in altitudes from 4,000-9,000 feet it is recommended that the Paslode 219247 High-Altitude Blue Metering Valve (sold separately) be used with the tools yellow fuel cell.Not just cordless - Paslode Cordless. That means no hoses, no compressors, and no hassles. Impulse Technology allows for minimal set-up so you can save time and money on the jobsite. Paslode Cordless uses a patented fuel plus battery system which has resulted in compact, lightweight tools that also offer exceptional power and performance. The Paslode Factory Reconditioned IM250II is a great example of this innovation. This ultra-light nailer packs a hefty punch for only weighing 4.75 pounds. Its able to drive 3/4 to 2-1/2 fasteners with ease, making it extremely versatile. You can also adjust the depth of drive without tools, saving you more time. Convenience of features and portability - what could be better? Attention International Customers Paslode products cannot be shipped outside of the USA.

Paslode 900600F Factory Reconditioned IM250A 16-Gauge Cordless Angled Finish Nailer with Impulse Technology

When operating this tool in altitudes from 4,000-9,000 feet it is recommended that the Paslode 219247 High-Altitude Blue Metering Valve (sold separately) be used with the tools yellow fuel cell.Not just cordless - Paslode Cordless. That means no hoses, no compressors, and no hassles. Impulse Technology allows for minimal set-up so you can save time and money on the jobsite. Paslode Cordless uses a patented fuel plus battery system which has resulted in compact, lightweight tools that also offer exceptional power and performance. The Paslode IM250A Factory Reconditioned Finish Nailer is a great example of this innovation. This ultra-light nailer packs a hefty punch for only weighing 4.9 pounds. Its able to drive 1-1/4 to 2-1/2 fasteners with ease. Tight spots and corners are no problem for the slim, angled design of the Paslode IM250A. You can also adjust the depth of drive without tools, saving you more time. Convenience of features and portability - what could be better?Attention International Customers Paslode products cannot be shipped outside of the USA.

Paslode 900078NT IM200-S16 16-Gauge Cordless Standard Crown Stapler with Impulse Technology

When operating this tool in altitudes from 4,000-9,000 feet it is recommended that the Paslode 219247 High-Altitude Blue Metering Valve (sold separately) be used with the tools yellow fuel cell.Not just cordless - Paslode Cordless. That means no hoses, no compressors, and no hassles. Impulse Technology allows for minimal set-up so you can save time and money on the jobsite. Paslode Cordless uses a patented fuel plus battery system which has resulted in compact, lightweight tools that also offer exceptional power and performance. The Paslode IM200-S16 is a great example of this innovation. This light stapler packs a hefty punch for only weighing 6.3 pounds. Its able to drive 3/4 to 2 fasteners with ease into the hardest of woods, making the IM200-S16 Standard Crown Stapler very versatile. You can also adjust the depth of drive without tools, saving you more time. Convenience of features and portability - what could be better? Attention International Customers Paslode products cannot be shipped outside of the USA.

Paslode 900420F Factory Reconditioned IM325CT Cordless Angled Framing Nailer with Impulse Technology

Using this tool in altitudes higher than 5,000 feet or temperatures below 19 F is not recommended. The 219247 High-Altitude Blue Metering Valve does not work with this tools red fuel cell and should not be used.Not just cordless - Paslode Cordless. That means no hoses, no compressors, and no hassles. Impulse Technology allows for minimal set-up so you can save time and money on the jobsite. Paslode Cordless uses a patented fuel plus battery system which has resulted in compact, lightweight tools that also offer exceptional power and performance. The Paslode Factory Reconditioned IM325CT is a great example of this innovation. This light nailer packs a hefty punch for only weighing 7.4 pounds. Its able to drive 2 to 3-1/4 fasteners with ease into the hardest of woods. Tight spots and corners are no problem for the angled design of the Paslode IM325CT. You can also adjust the depth of drive without tools, saving you more time. Convenience of features and portability - what could be better? Attention International Customers Paslode products cannot be shipped outside of the USA.

Paslode 902000 IM250II 16-Gauge Cordless Straight Finish Nailer with Impulse Technology

When operating this tool in altitudes from 4,000-9,000 feet it is recommended that the Paslode 219247 High-Altitude Blue Metering Valve (sold separately) be used with the tools yellow fuel cell.Not just cordless - Paslode Cordless. That means no hoses, no compressors, and no hassles. Impulse Technology allows for minimal set-up so you can save time and money on the jobsite. Paslode Cordless uses a patented fuel plus battery system which has resulted in compact, lightweight tools that also offer exceptional power and performance. The Paslode IM250II is a great example of this innovation. This ultra-light nailer packs a hefty punch for only weighing 4.75 pounds. Its able to drive 3/4 to 2-1/2 fasteners with ease, making it extremely versatile. You can also adjust the depth of drive without tools, saving you more time. Convenience of features and portability - what could be better? Attention International Customers Paslode products cannot be shipped outside of the USA.

Paslode OT2855 1 1/2 Inch 16 Gauge Wide Crown Staples

The Paslode OT2855 is a box of 10,500 1 1/2 Inch 16 gauge wide crown nails. They can be used with the Paslode 501270 S150-W16R 16 Gauge Construction Stapler. They are designed with a special coating to ensure excellent holding power and ease of driving. Attention International Customers Paslode products cannot be shipped outside of the USA.

Paslode 402500 Rechargeable 6-Volt Battery for Impulse Cordless Staplers

The Paslode 402500 is a replacement battery for the Paslode 900078NT IM200-S16 16-Gauge Cordless Standard Crown Stapler. With the 402500 Impulse Battery you have the power to drive up to 4,000 staples in a single charge. Keep a few on hand to minimize downtime and increase productivity. Attention International Customers Paslode products cannot be shipped outside of the USA.

Paslode 650231 1-1/2 Inch 16-Gauge Angled Finish Nails (2,000 Per Box)

The Paslode 650231 is a box of 2,000 1-1/2 16-gauge angled finish nails. They can be used with the Paslode 900600 IM250A 16-Gauge Cordless Angled Finish Nailer. These high-quality fasteners are designed to ensure consistent drivability and are heat-treated and galvanized to increase durability. Attention International Customers Paslode products cannot be shipped outside of the USA.

Paslode 650047 2-Inch 16-Gauge Angled Finish Nails (2,000 Per Box)

The Paslode 650047 is a box of 2,000 2 16-gauge angled finish nails. They can be used with the Paslode 900600 IM250A 16-Gauge Cordless Angled Finish Nailer. These high-quality fasteners are designed to ensure consistent drivability and are heat-treated and galvanized to increase durability. Attention International Customers Paslode products cannot be shipped outside of the USA.

Paslode 650232 2-1/2Inch Inch 16-Gauge Angled Finish Nails (2,000 Per Box)

The Paslode 650232 is a box of 2,000 2-1/2 16-gauge angled finish nails. They can be used with the Paslode 900600 IM250A 16-Gauge Cordless Angled Finish Nailer. These high-quality fasteners are designed to ensure consistent drivability and are heat-treated and galvanized to increase durability.Attention International Customers Paslode products cannot be shipped outside of the USA.

Paslode 900200 Two-Hour Battery Charger for Impulse Cordless Tools

The Paslode 900200 Battery Charger works on all Paslode Impulse Cordless Products. It can charge Impulse batteries in two hours, so that you can get back to work in no time. Pick up a few of these chargers for maximum convenience and minimum downtime. Attention International Customers Paslode products cannot be shipped outside of the USA.

Paslode 650230 1-1/4 Inch 16-Gauge Angled Finish Nails (2,000 Per Box)

The Paslode 650230 is a box of 2,000 1-1/4 16-gauge angled finish nails. They can be used with the Paslode 900600 IM250A 16-Gauge Cordless Angled Finish Nailer. These high-quality fasteners are designed to ensure consistent drivability and are heat-treated and galvanized to increase durability. Attention International Customers Paslode products cannot be shipped outside of the USA.

Paslode 404071 1-1/4 Inch 16-Gauge Galvanized Wide Crown Staples (9,000 Per Box)

The Paslode 404071 staples work with the Paslode 501270 S150-W16R 16-Gauge Wide-Crown Pneumatic Construction Stapler and the Paslode 501265 S200-W16 16-Gauge Insulation Sheathing Stapler. They are designed with a special coating to ensure excellent holding power and ease of driving and the galvanized finish resists corrosion, making them suitable for exterior applications. Attention International Customers Paslode products cannot be shipped outside of the USA.

Paslode 404717 Rechargeable 6-Volt Battery for Impulse Cordless Nailers

The Paslode 404717 is a replacement battery for the Paslode Impulse Cordless Nailers. It works on Paslode models 900400, 900420, 900600, and 902000. With the 404717 Impulse Battery you have the power to drive up to 4,000 nails in a single charge. Keep a few on hand to minimize downtime and increase productivity. Attention International Customers Paslode products cannot be shipped outside of the USA.

Paslode 650283 1-1/2 Inch 16-Gauge Straight Finish Nails (2,000 Per Box)

The Paslode 650283 is a box of 2,000 1-1/2 16-gauge straight finish nails. They can be used with the Paslode 902000 IM250S-F16 16-Gauge Cordless Straight Finish Nailer, the Paslode 501680 T250S-F16 16-Gauge Pneumatic Straight Finish Nailer, and the Paslode 403700 3250-F16 16-Gauge Trim/Finish Nailer. These high-quality fasteners are designed to ensure consistent drivability and are heat-treated and galvanized to increase durability. Attention International Customers Paslode products cannot be shipped outside of the USA.

Paslode 650285 2-Inch 16-Gauge Straight Finish Nails (2,000 Per Box)

The Paslode 650285 is a box of 2,000 2 16-gauge straight finish nails. They can be used with the Paslode 902000 IM250S-F16 16-Gauge Cordless Straight Finish Nailer, the Paslode 501680 T250S-F16 16-Gauge Pneumatic Straight Finish Nailer, and the Paslode 403700 3250-F16 16-Gauge Trim/Finish Nailer. These high-quality fasteners are designed to ensure consistent drivability and are heat-treated and galvanized to increase durability.Attention International Customers Paslode products cannot be shipped outside of the USA.

Paslode 404069 7/8-Inch 16-Gauge Galvanized Wide Crown Staples (9,000 Per Box)

The Paslode 404069 staples work with the Paslode 501270 S150-W16R 16-Gauge Wide-Crown Pneumatic Construction Stapler and the Paslode 501265 S200-W16 16-Gauge Insulation Sheathing Stapler. They are designed with a special coating to ensure excellent holding power and ease of driving and the galvanized finish resists corrosion, making them suitable for exterior applications. Attention International Customers Paslode products cannot be shipped outside of the USA.

Paslode 404070 1-Inch 16-Gauge Galvanized Wide Crown Staples (9,000 Per Box)

The Paslode 404070 staples work with the Paslode 501270 S150-W16R 16-Gauge Wide-Crown Pneumatic Construction Stapler and the Paslode 501265 S200-W16 16-Gauge Insulation Sheathing Stapler. They are designed with a special coating to ensure excellent holding power and ease of driving and the galvanized finish resists corrosion, making them suitable for exterior applications. Attention International Customers Paslode products cannot be shipped outside of the USA.

Paslode 650287 2-1/2 Inch 16-Gauge Straight Finish Nails (2,000 Per Box)

The Paslode 650285 is a box of 2,000 2 16-gauge straight finish nails. They can be used with the Paslode 902000 IM250S-F16 16-Gauge Cordless Straight Finish Nailer, the Paslode 501680 T250S-F16 16-Gauge Pneumatic Straight Finish Nailer, and the Paslode 403700 3250-F16 16-Gauge Trim/Finish Nailer. These high-quality fasteners are designed to ensure consistent drivability and are heat-treated and galvanized to increase durability. Attention International Customers Paslode products cannot be shipped outside of the USA.

Paslode 650434 2-3/8 Inch x .113 Inch Brite Round-Head Ring-Shank Framing Nails with 30-Degree ToughTape Collation (500 Per Bucket)

All Paslode fasteners feature high holding power, ease of drive and advanced collation methods. The Paslode 650434 Framing Nails are no exception. The Paslode 650434 Framing Nails work with the Paslode 900420 IM325CT Cordless Angled Framing Nailer and the Paslode 501000 F-350S PowerMaster Plus? Pneumatic Framing Strip Nailer. The Paslode 650434 nails are collated with ToughTape, which allows for 20% more nails per strip than plastic-strip nails. They also produce less waste on the jobsite for you to clean up. The ToughTape collation means that the nail strip will not break if you drop it and they will not deteriorate in wet weather. Attention International Customers Paslode products cannot be shipped outside of the USA.

Paslode 650436 3-1/4 Inch x .131 Inch Brite Round-Head Smooth-Shank Framing Nails with 30-Degree ToughTape Collation (500 Per Bucket)

All Paslode fasteners feature high holding power, ease of drive and advanced collation methods. The Paslode 650436 Framing Nails are no exception. The Paslode 650436 Framing Nails work with the Paslode 900420 IM325CT Cordless Angled Framing Nailer and the Paslode 501000 F-350S PowerMaster Plus? Pneumatic Framing Strip Nailer. The Paslode 650436 nails are collated with ToughTape, which allows for 20% more nails per strip than plastic-strip nails. They also produce less waste on the jobsite for you to clean up. The ToughTape collation means that the nail strip will not break if you drop it and they will not deteriorate in wet weather. Attention International Customers Paslode products cannot be shipped outside of the USA.

Paslode 650431 2 Inch x .113 Inch Hot Dipped Galvanized Plus Round-Head Ring-Shank Framing Nails with 30-Degree ToughTape Collation (500 Per Bucket)

All Paslode fasteners feature high holding power, ease of drive and advanced collation methods. The Paslode 650431 Framing Nails are no exception. The Paslode 650431 Framing Nails work with the Paslode 900420 IM325CT Cordless Angled Framing Nailer and the Paslode 501000 F-350S PowerMaster Plus? Pneumatic Framing Strip Nailer. The Paslode 650431 nails are collated with ToughTape, which allows for 20% more nails per strip than plastic-strip nails. They also produce less waste on the jobsite for you to clean up. The ToughTape collation means that the nail strip will not break if you drop it and they will not deteriorate in wet weather. These Hot Dipped Galvanized Plus nails offer superior corrosion protection in all pressure treated lumber and reduce staining but up to 80%, so they are perfect for exterior applications. Attention International Customers Paslode products cannot be shipped outside of the USA.

Paslode 650433 3 Inch x .120 Inch Hot Dipped Galvanized Plus Round-Head Ring-Shank Framing Nails with 30-Degree ToughTape Collation (500 Per Bucket)

All Paslode fasteners feature high holding power, ease of drive and advanced collation methods. The Paslode 650433 Framing Nails are no exception. The Paslode 650433 Framing Nails work with the Paslode 900420 IM325CT Cordless Angled Framing Nailer and the Paslode 501000 F-350S PowerMaster Plus? Pneumatic Framing Strip Nailer. The Paslode 650433 nails are collated with ToughTape, which allows for 20% more nails per strip than plastic-strip nails. They also produce less waste on the jobsite for you to clean up. The ToughTape collation means that the nail strip will not break if you drop it and they will not deteriorate in wet weather. These Hot Dipped Galvanized Plus nails offer superior corrosion protection in all pressure treated lumber and reduce staining but up to 80%, so they are perfect for exterior applications. Attention International Customers Paslode products cannot be shipped outside of the USA.

Paslode 500910 T250A-F16 16-Gauge Pneumatic Angled Finish Nailer

The Paslode 500910 T250A-F16 Pneumatic Angled Finish Nailer will quickly become the workhorse of your workshop. It is powerful, yet amazingly lightweight at only 3.8 lbs., and is well-balanced for easy handling, especially when working overhead. Its compact, angled design lets you get into tight spaces that straight nailers cannot. The Paslode T250A-F16 is adjustable to your needs and all of your controls are within reach so you can get through any job quickly. The depth of drive is adjustable without tools, so you can change it with one hand for precise control on hard or soft woods. It has all of the features you want in a finish nailer, thats why it was rated #1 by the Journal of Light Construction.Attention International Customers Paslode products cannot be shipped outside of the USA.

Paslode 500855 F250S-PP Positive Placement? Pneumatic Metal Hardware Framing Nailer

Getting through a job has never been as easy and quick as with the Paslode F250S-PP Positive PlacementTM Metal Hardware Framing Nailer. You can increase productivity and save on labor costs when you have one of these in your line-up. This framing nailer is at least three times faster than hand nailing and can drive 1-1/2 or 2-1/2 nails with the power of air. The Paslode 500855 F250S-PP features a hardened nose probe that makes consistently accurate nail placement a breeze. The nose probe locates metal hardwards holes and guides your fastener into the correct spot while its being driven. Positive placement of every nail, every time - no longer just a dream, but a reality. Attention International Customers Paslode products cannot be shipped outside of the USA.

Paslode 650432 2-3/8 Inch x .113 Inch Hot Dipped Galvanized Plus Round-Head Ring-Shank Framing Nails with 30-Degree ToughTape Collation (500 Per Bucket)

All Paslode fasteners feature high holding power, ease of drive and advanced collation methods. The Paslode 650432 Framing Nails are no exception. The Paslode 650432 Framing Nails work with the Paslode 900420 IM325CT Cordless Angled Framing Nailer and the Paslode 501000 F-350S PowerMaster Plus? Pneumatic Framing Strip Nailer. The Paslode 650432 nails are collated with ToughTape, which allows for 20% more nails per strip than plastic-strip nails. They also produce less waste on the jobsite for you to clean up. The ToughTape collation means that the nail strip will not break if you drop it and they will not deteriorate in wet weather. These Hot Dipped Galvanized Plus nails offer superior corrosion protection in all pressure treated lumber and reduce staining but up to 80%, so they are perfect for exterior applications. Attention International Customers Paslode products cannot be shipped outside of the USA.

The Motor Head Grill

Couldn't find International Tool Boxeshere? Are you looking for something else? Search our partner sites:

                                                                                                                      International Tool Boxes