Hot Deals of the Week                                  

Hot Deals of the Week tools and information

Find Hot Deals of the Week at best prices and buy!

PAM Fastening HB220 1/2Inch Hot Melt Applicator

Perfect for general hot melt applications where a lightweight, easy-to-use tool is needed. The HB220 has an adjustable trigger for great ergonomics as well as an adjustable operating temperature.

Safety Speed Cut 60HA Edgebander SSC-EDGE Hot Air, 1 Phase, 230/115V, 20 Amps

The new Safety Speed Cut 60HA Hot Air Edgebander is small in size yet big in ability. This Edgebander features fingertip electronic variable speed control and digital electronic temperature control. A micro adjust tape guide for quick tape changes, electromagnetic end cutters, a pressure roller, and the accutrim edge trim system that eliminates the need to file or sand trim edges makes this unit a very dependable edgebanding solution . The innovative design of the 60HA makes it extremely easy to operate and the smaller size makes it a good addition to even a small woodworking shop.

Paslode 650431 2 Inch x .113 Inch Hot Dipped Galvanized Plus Round-Head Ring-Shank Framing Nails with 30-Degree ToughTape Collation (500 Per Bucket)

All Paslode fasteners feature high holding power, ease of drive and advanced collation methods. The Paslode 650431 Framing Nails are no exception. The Paslode 650431 Framing Nails work with the Paslode 900420 IM325CT Cordless Angled Framing Nailer and the Paslode 501000 F-350S PowerMaster Plus? Pneumatic Framing Strip Nailer. The Paslode 650431 nails are collated with ToughTape, which allows for 20% more nails per strip than plastic-strip nails. They also produce less waste on the jobsite for you to clean up. The ToughTape collation means that the nail strip will not break if you drop it and they will not deteriorate in wet weather. These Hot Dipped Galvanized Plus nails offer superior corrosion protection in all pressure treated lumber and reduce staining but up to 80%, so they are perfect for exterior applications. Attention International Customers Paslode products cannot be shipped outside of the USA.

Paslode 650433 3 Inch x .120 Inch Hot Dipped Galvanized Plus Round-Head Ring-Shank Framing Nails with 30-Degree ToughTape Collation (500 Per Bucket)

All Paslode fasteners feature high holding power, ease of drive and advanced collation methods. The Paslode 650433 Framing Nails are no exception. The Paslode 650433 Framing Nails work with the Paslode 900420 IM325CT Cordless Angled Framing Nailer and the Paslode 501000 F-350S PowerMaster Plus? Pneumatic Framing Strip Nailer. The Paslode 650433 nails are collated with ToughTape, which allows for 20% more nails per strip than plastic-strip nails. They also produce less waste on the jobsite for you to clean up. The ToughTape collation means that the nail strip will not break if you drop it and they will not deteriorate in wet weather. These Hot Dipped Galvanized Plus nails offer superior corrosion protection in all pressure treated lumber and reduce staining but up to 80%, so they are perfect for exterior applications. Attention International Customers Paslode products cannot be shipped outside of the USA.

Paslode 650432 2-3/8 Inch x .113 Inch Hot Dipped Galvanized Plus Round-Head Ring-Shank Framing Nails with 30-Degree ToughTape Collation (500 Per Bucket)

All Paslode fasteners feature high holding power, ease of drive and advanced collation methods. The Paslode 650432 Framing Nails are no exception. The Paslode 650432 Framing Nails work with the Paslode 900420 IM325CT Cordless Angled Framing Nailer and the Paslode 501000 F-350S PowerMaster Plus? Pneumatic Framing Strip Nailer. The Paslode 650432 nails are collated with ToughTape, which allows for 20% more nails per strip than plastic-strip nails. They also produce less waste on the jobsite for you to clean up. The ToughTape collation means that the nail strip will not break if you drop it and they will not deteriorate in wet weather. These Hot Dipped Galvanized Plus nails offer superior corrosion protection in all pressure treated lumber and reduce staining but up to 80%, so they are perfect for exterior applications. Attention International Customers Paslode products cannot be shipped outside of the USA.

MK Diamond 158436 MK-1225 10Inch Hot Dog Porcelain & Tile Wet Cutting Diamond Blade

Premium grade thin-rim blades for porcelain & vitreous tile.

MK Diamond 158434 MK-1225 7Inch Hot Dog Porcelain & Tile Wet Cutting Diamond Blade

Premium grade thin-rim blades for porcelain & vitreous tile.

Bostitch RHS8D113HDG Galvanized Diamond Point Nail

-Stick Framing Nails 21 Degree-Plastic Collated Smooth Shank-Hot Dipped- Round Head Boxed-Lgth X Dia. Inches=2-3/8 X .113-Box of 5000

DeWalt DW9116R Factory Reconditioned DW9116 7.2V - 18V One Hour Charger

The DeWalt DW9116 is a Factory Reconditioned 7.2V - 18V One Hour Charger. The DEWALT 3-stage charging system provides maximum run-time and extends overall life of the battery. The battery thermal protection system prevents the charging of batteries that are too hot or too cold which would cause damage to the battery and a loss of run-time. The battery features diagnostics with 5 LED indicators to communicate battery charge status charged, charging, power line problem, replace pack and battery too hot or too cold.

DeWalt DCA16125 1-1/4Inch 2500 Count Angle Nails

The DeWalt DCA16125 is a box of 2500 16 Gauge 20 1-1/4 Angle Nails. These 16 gauge 20 finish nails are manufactured out of cold-worked carbon steel and galvanized in a hot-dip process, which ensures that each nail will resist rust and moisture. Nails are ideal for finish work.

Eclipse 900-119 Heat Gun, 10.0 Amps

The Eclipse 900-119 is a 1200 Watt and 10 Amp Heat Gun. This heat gun is used for heat shrink tubing, stretching and bending, vinyl (PVC) and other plastics, and activating hot melt adhesives. It features deluxe 2 temperature heat settings of 600F and 1000F.

Grip 46110 12Inch Professional Scraper with Three Blades

Designed to reach into tight spaces Ideal for removing stickers from windshields and bumpers Spring release allows easy interchange of blades Hollow handle stores blades when hot in use Includes Scraper, 3 stainless steel blades, and one plastic blade for use on safety plastic laminated glass

Chicago Pneumatic QRS5.0HPD-3 High Performance 5 HP Rotary Screw Compressor w/ Dryer - (3 Phase)

5-Year/20,000 Hour Extended Warranty Available Learn MoreQuiet by design with a low sound enclosure and innovative cooling fan, the CPs QRS series offers the lowest noise levels available. Exceptional performance combined with efficient rotary screw technology and a high efficiency TEFC motor, the QRS offers low energy consumption, reducing your monthly electric bill. With its compact space saving design and quiet operation, the QRS series can easily be installed just about anywhere in the shop. With its simple compression concept and continuous contact cooling, the QRS series can operate fully loaded-24 hours a day / 7 days a week.

Chicago Pneumatic QRS3.0HPD-3 High Performance 3 HP Rotary Screw Air Compressor - (3 Phase)

5-Year/20,000 Hour Extended Warranty Available Learn MoreQuiet by design with a low sound enclosure and innovative cooling fan, the CPs QRS series offers the lowest noise levels available. Exceptional performance combined with efficient rotary screw technology and a high efficiency TEFC motor, the QRS offers low energy consumption, reducing your monthly electric bill. With its compact space saving design and quiet operation, the QRS series can easily be installed just about anywhere in the shop. With its simple compression concept and continuous contact cooling, the QRS series can operate fully loaded-24 hours a day / 7 days a week.

Chicago Pneumatic QRS3.0HP-1 Air Compressor, Rotary Screw, 3HP, 1 Phase

5-Year/20,000 Hour Extended Warranty Available Learn MoreChicago Pneumatic QRS3.0HP-1 Air Compressor, Rotary Screw, 3HP, 1 Phase. Quiet by design with a low sound enclosure and innovative cooling fan, the CPs QRS series offers the lowest noise levels available. Exceptional performance combined with efficient rotary screw technology and a high efficiency TEFC motor, the QRS offers low energy consumption. the QRS series can operate fully loaded-24 hours a day / 7 days a week. There are no wearing parts, the CP QRS offers increased reliability, reduced maintenance and trouble-free operation. No need to worry about rings, valves, rod inserts, bushings and pistons.

Chicago Pneumatic QRS3.0HP-3 High Performance 3 HP Rotary Screw Air Compressor - (3 Phase)

5-Year/20,000 Hour Extended Warranty Available Learn MoreQuiet by design with a low sound enclosure and innovative cooling fan, the CPs QRS series offers the lowest noise levels available. Exceptional performance combined with efficient rotary screw technology and a high efficiency TEFC motor, the QRS offers low energy consumption, reducing your monthly electric bill. With its compact space saving design and quiet operation, the QRS series can easily be installed just about anywhere in the shop. With its simple compression concept and continuous contact cooling, the QRS series can operate fully loaded-24 hours a day / 7 days a week.

Chicago Pneumatic QRS5.0HP-3 High Performance 5 HP Rotary Screw Air Compressor, 3 Phase

5-Year/20,000 Hour Extended Warranty Available Learn MoreQuiet by design with a low sound enclosure and innovative cooling fan, the CPs QRS series offers the lowest noise levels available. Exceptional performance combined with efficient rotary screw technology and a high efficiency TEFC motor, the QRS offers low energy consumption, reducing your monthly electric bill. With its compact space saving design and quiet operation, the QRS series can easily be installed just about anywhere in the shop. With its simple compression concept and continuous contact cooling, the QRS series can operate fully loaded-24 hours a day / 7 days a week.

Chicago Pneumatic QRS5.0HP-1 High Performance 5 HP Rotary Screw Compressor - (1 Phase)

5-Year/20,000 Hour Extended Warranty Available Learn MoreQuiet by design with a low sound enclosure and innovative cooling fan, the CPs QRS series offers the lowest noise levels available. Exceptional performance combined with efficient rotary screw technology and a high efficiency TEFC motor, the QRS offers low energy consumption, reducing your monthly electric bill. With its compact space saving design and quiet operation, the QRS series can easily be installed just about anywhere in the shop. With its simple compression concept and continuous contact cooling, the QRS series can operate fully loaded-24 hours a day / 7 days a week.

Bosch BAT181 18V 2.4 Amp-Hour BLUECORE Battery

The Bosch BAT181 is a 18V 2.4 Amp-Hour BLUECORE Battery. The BLUECORE Batteries can charge in 30 minutes. Other batteries can take up to 3 hours to charge when hot. BLUECORE Batteries were engineered with internal cooling rods placed between the battery cells to absorb damaging heat. The battery cells stay cooler during operation and charging as compared with standard batteries which heat up quickly, speeding up chemical breakdown and shortening battery life. BLUECORE Battery can charge in 30 minutes while other batteries take up to 3 hours to charge when hot.

Chicago Pneumatic QRS5.0HPD-1 5HP Quiet Rotary Screw Air Compressor with Air Dryer (1 phase)

5-Year/20,000 Hour Extended Warranty Available Learn MoreQuiet by design with a low sound enclosure and innovative cooling fan, the CPs QRS series offers the lowest noise levels available. Exceptional performance combined with efficient rotary screw technology and a high efficiency TEFC motor, the QRS offers low energy consumption, reducing your monthly electric bill. With its compact space saving design and quiet operation, the QRS series can easily be installed just about anywhere in the shop. With its simple compression concept and continuous contact cooling, the QRS series can operate fully loaded-24 hours a day / 7 days a week. There are no wearing parts, the CP QRS offers increased reliability, reduced maintenance and trouble-free operation. No need to worry about rings, valves, rod inserts, bushings and pistons. Extended service intervals save time and money. Convent service panel with easy access to internal components.

Chicago Pneumatic QRS75HP-1 7.5HP Rotary Screw Air Compressor Single Phase

5-Year/20,000 Hour Extended Warranty Available Learn MoreQuiet by design with a low sound enclosure and innovative cooling fan, the CPs QRS series offers the lowest noise levels available. Exceptional performance combined with efficient rotary screw technology and a high efficiency TEFC motor, the QRS offers low energy consumption, reducing your monthly electric bill. With its compact space saving design and quiet operation, the QRS series can easily be installed just about anywhere in the shop. With its simple compression concept and continuous contact cooling, the QRS series can operate fully loaded-24 hours a day / 7 days a week. There are no wearing parts, the CP QRS offers increased reliability, reduced maintenance and trouble-free operation. No need to worry about rings, valves, rod inserts, bushings and pistons. Extended service intervals save time and money. Convent service panel with easy access to internal components.

DeWalt DCA16200 2-Inch 2500 Count Angle Nails

The DeWalt DCA16200 is a box of 2500 16 Gauge 20 2 Angle Nails. These 16 gauge 20 angled finish nails are manufactured out of cold-worked carbon steel and galvanized in a hot-dip process, which ensures that each nail will resist rust and moisture. These nails are ideal for finish work and are for use with DeWalt cordless angled nailers.

Bosch BAT100 9.6V 2.0 Amp-Hour BLUECORE Battery

The Bosch BAT100 is a 9.6V 2.0 Amp-Hour BLUECORE Battery. The battery is fully compatible with all Bosch Cordless Tools. The BLUECORE cooling rods are placed between battery cells to absorb heat and protect battery from damage. Battery cells stay cooler during tool operation and charging. BLUECORE Battery can charge in 30 minutes compared to other batteries which can take up to 3 hours to charge when hot.

DeWalt DC9310 7.2V-18V NiCd/NiMH/Li-Ion Charger*****

The DC9310 charges all DEWALT 7.2V - 18V NiCd, NiMH or Li-Ion batteries (except Univolt) in about 1 hour. It features the patented 3-stage charging system which provides maximum run-time and extends the overall life of the battery.Diagnostics with LED indicator communicates battery charge status charged, charging, power line problem, replace pack, and battery too hot or too cold

MK Diamond 166967 TX-30 10-Inch Diamond Blade With 1-Inch Arbor For Porcelain

TX-30 offers a thicker kerf version of MK Diamonds popular Hot Dog blade. The unique J cooling slots deliver fast chip free cutting of porcelain tile and other hard dense materialsTX Blade Series have a 1" arbor that differentiates them from typical wet cutting tile blades available in the market. The TX Blade Series are premium blades that match the high quality standards that professionals expect. Please note: standard 5/8" Arbor Tile Blades will NOT Fit the TX-3 tile saw.

DeWalt DCA16250 2-1/2 inch 2500 Count Angle Nails

The DeWalt DCA16250 is a box of 2500 16 Gauge 20 2-1/2 inch Angle Nails. These 16 gauge 20 angled finish nails are manufactured out of cold-worked carbon steel and galvanized in a hot-dip process, which ensures that each nail will resist rust and moisture. These nails are ideal for finish work and are for use with DeWalt cordless angled nailers.

DeWalt DCA16150 1-1/2Inch 2500 Count Angle Nails

The DeWalt DCA16150 is a box of 2500 16 Gauge 20 1-1/2 2500 Count Angle Nails. These 16 gauge 20 finish nails are manufactured out of cold-worked carbon steel and galvanized in a hot-dip process which ensures that each nail will resist rust and moisture. These 1-1/2 16 gauge 20 nails are ideal for finish work and are compatible with DeWalt cordless angled nailers.

Bosch BAT120 12V 2.0 Amp-Hour BLUECORE Battery

The Bosch BAT120 is a 12V 2.0 Amp-Hour BLUECORE Battery. The BLUECORE Batteries are engineered with internal cooling rods placed between the battery cells to absorb damaging heat. The battery cells stay cooler during operation and charging as compared with standard batteries which heat up quickly, speeding up chemical breakdown and shortening battery life. BLUECORE Batteries can charge in 30 minutes while other batteries take up to 3 hours to charge when hot.

DeWalt DW9116 7.2V 18V 1 Hour Charger with Automatic Tune-Up Mode - Accessory Only

The DeWalt DW9116 is a 7.2V - 18V One Hour Charger with Automatic Tune-Up Mode. It is used to optimize the performance and life of DeWalt batteries. It is required to leave the battery in the charger for 4 to 10 hours to revitalize the battery, approximately every tenth charge. Every charge gives longer run time and up to 20% more cycle life. It has diagnostics with 5 LED indicators which are used to communicate battery charge status like charged, charging, power line problem, replace pack and battery too hot or too cold.

Bosch 52318 18V Jig Saw - Tool Only

The Bosch 52318 is a 18V Jig Saw - Tool Only. It is a bare tool, no battery/Charger included. The Bosch Jig Saw offers a One-Touch blade-change system for quick blade changes, ejecting hot or broken blades with the pull of a lever. The unit also features the patented Bosch blade-retention system, with an exclusive three-position grip that maintains secure blade position for precise cuts. The powerful Bosch-built motor includes magnesium gear housing and the large die-cast aluminum foot provides stable guidance and control.

Porter-Cable 8924 9.6V -19.2V Battery Charger

The Porter-Cable 8924 is a 9.6V - 19.2V Battery Charger. Designed to prolong battery life, the advanced diagnostic charger senses the condition of the battery before charging. If the battery is too hot or too cold to be charged without risking damage, the charger will wait until the battery is in the proper temperature range before charging. A green light flashes while the charger is waiting and then lights solid during charging. When the battery is fully charged, the light goes off and the charger switches to trickle-charge mode. The battery can be left on the charger and it will remain fully charged without overcharging. Also, a second indicator light will flash red during charging to indicate a battery that is getting weak or has been fully discharged. If the battery is nearing the end of its useful life, the red light will continue to blink during the charging cycle. When a battery needs to be replaced because it will no longer take a charge, both lights-red and green-will blink during charging.

Central Park - Original Trailer 1932

Couldn't find Hot Deals of the Weekhere? Are you looking for something else? Search our partner sites:

    Hot Deals of the Week