Hitachi Power Tools tools and information

Find Hitachi Power Tools at best prices and buy!

Hitachi DV18DCL 18-Volt Lithium-Ion Cordless 1/2-Inch Hammer Drill

The Hitachi DV18DCL is a 1/2-Inch 18-Volt Lithium-Ion Hammer Drill. The Hitachi DV18DCL delivers a maximum torque of 380 in/lbs and has a 2-speed transmission with variable speed ranges from 0-400 in low and 0-1,500 in high. The hammer drill impact rate is 0-21,000bpm for even the toughest applications. A 22 stage slip clutch helps with all varies jobs along with tools balance.

Denver Tools 120013 34°Angle Finish Nailer

The Denver Tools 120013 34 Angle Finish Nailer drives 15 gauge finish nails from 32mm to 64mm in length. Its large cast aluminum body provides more power to easily drive nails into hard woods. The well balanced design makes it more efficient and the angled magazine enables you to nail into corners. The nailer features a 360 degree exhaust port that can be adjusted to any direction and a quick release nose cover to easily clear jams. The angle finish nailer is ideal for door and window trims, exterior trims, cabinet work, finish paneling and decorative trims.

Denver Tools 120021 2 In 1 Combo Nailer

The Denver Tools 120021 2 In 1 Combo Nailer drives 18 gauge finish nails from 15mm to 50mm in length as well as 18 gauge staples from 16mm to 40 mm in length. The 2 in 1 magazine shoots staples and finish nails without adjustment. The large cast aluminum body provides more power to easly drive nails into hard woods. A rubber comfort grip handle privides improved control and comfort even during extended use. The 192120021 2 In 1 Combo Nailer also has a 360-Degree exhaust port that can be adjusted to any direction. Continuous firing makes for high efficient working and a narrow nose is ideal for door and window trims, exterior trims and cabinet work as well as finish paneling, decorative trims and furniture making.

DeWalt BAG6PC Empty Tool Bag for 18 Volt Tools

The DeWalt BAG6PC is an Empty Tool Bag for 18V Tools. The empty tool bag from DC6KITA 6-tool cordless combo kit easily holds 6 power tools plus accessories. It has heavy-duty ballistic nylon for long life. It features reinforced bottom and side panels. Double stitching and steel rivets for maximum durability Heavy-Duty handles allow heavy loads.

Bondhus 10836 Set of 12 Balldriver Power Bits - Inches

-Balldriver® power bits are designed for power tools having 1/4 hex adapter. Saves time and increases productivity. All power bits are 3 long.

Bondhus 10899 Set of 9 Balldriver Power Bits - Metric

-Balldriver® power bits are designed for power tools having 1/4 hex adapter. Saves time and increases productivity. All power bits are 3 long.

Bench Dog 40-028 Power-Loc Auxiliary Safety Power Switch

Bench Dog 40-028 Power-Loc is an auxiliary power switch that can be mounted almost anywhere. Its aluminum housing has six t-slots, and comes with an angle bracket for universal mounting. The lighted switch warns you when the power is on, crucial when using routers and other power tools that already come with their own power switch. Power-Loc also comes with a safety lock to help prevent accidental tripping. 15 amp, 120 volt, 8 cord. Nonmagnetic.

Hitachi DH22PG 7/8-Inch SDS Plus Rotary Hammer

The Hitachi DH22PG is the 7/8 compact and lightweight SDS rotary hammer. The Hitachi DH22PG is ideal for overhead or tight areas because of its small design. The DH22PG comes with a powerful 5.4-amp motor which provides exceptional drilling performance. With two modes of operation, the DH22PG can also be used in wood and steel drilling applications or for setting fasteners and screws. The DH22PG also has a slip clutch mechanism to prevent gear damage along with an Idle Strike restrictor to prevent hammering while there is in no-load operation to pro-long the tool life.

Hitachi UC18YRL Universal Charger for 7.2V to 18V Ni-Cad/Ni-Mh Lithium-Ion Batteries

The Hitachi UC18YRL is an Universal Charger for 7.2V to 18V Ni-Cad/Ni-Mh Lithium-Ion Batteries. The charger is designed to recharge the Hitachi EBM1830 HXP Battery. The charger can also recharge other compatible 7.2-18V, Lithium-Ion, NiCd and NiMH batteries.

Tenryu PT-18524AM 7-1/4Inch 24 Teeth Power Tool Series Circular Saw Blade

The Tenryu PT-18524AM is a 7-1/4 24 Teeth Power Tool Series Circular Saw Blade. This thin kerf power tool series is for the contractor. The blade is for portable and stationary power tools. Thin kerf wood cutting blade is designed especially for smooth cuts on miter and slide-compound.

Hitachi NT65MA2 2-1/2? Angled Finish Nailer with Blow Nozzle

Hitachi NT65MA2 is a 15-Gauge 2-1/2 Angled Finish Nailer with Blow Nozzle. This tool is 4.4 lbs, lightweight and well balanced for easy maneuverability. The selective actuation (ANSI Compliant), allows transition from single actuation to contact actuation. It has a Tool-less clogged nail release mechanism for greater ease of use and Depth of drive adjustment, for accurate nail depth in varying materials. Unique air duster, clears debris before material installation. The adjustable air deflector, directs the air exhaust in any direction. It has a Long-lasting rubber grip, for added comfort.

Tenryu PT-18524-P 7-1/4Inch 24 Teeth Power Tool Series Circular Saw Blade

The Tenryu PT-18524-P is a 7-1/4 24 Teeth Power Tool Series Circular Saw Blade. This thin kerf power tool series is for the contractor. The blade is for portable and stationary power tools. Thin kerf wood cutting blade is designed especially for smooth cuts on miter and slide-compound. This blade is primarily used for portable saws and 8-1/4 table saws.

Denver Tools 502 150mm Air Hammer

The Denver Tools 502 is a 150mm Air Hammer which comes with 4 chisels.

Denver Tools 301 Jitterburg Sander

The Denver Tools 301 is a pneumatic Jitterburg Sander. This traditional style jitterbug sander with metal construction features a rubber grip and locking clamps to give you a good grip on both the tool and the sandpaper. This sander can be used on many materials including paint, metal and fiberglass.

Denver Tools 816A Air Angle Die Grinder

The Denver Tools 816A is a Air Angle Die Grinder. The angled head provides access to hard to reach places.

Denver Tools 653A 3/8-Inch In-line Air Drill

The Denver Tools 653A is a 3/8-Inch In-line Air Drill with variable speed. This small drill makes drilling in tight spaces easy.

Denver Tools 93486 Mini Grease Gun

The Denver Tools 93486 is a Mini Grease Gun. This small, one-hand operated grease gun is perfect for greasing in tight spaces.

Denver Tools RM016 16 oz Rubber Mallet

The Denver Tools RM016 is a 16 oz Rubber Mallet. This mallet features a double-faced rubber head with a rubber gripped handle.

Denver Tools SC02 1/4-Inch Swivel Connector

The Denver Tools SC02 is a 1/4-Inch Swivel Connector. This connector has a 360 swivel to prevent the air hose from kinking.

Hitachi NR83A2(S) 2-Inch to 3-1/4 Inch Full Head Framing Nailer w/o Depth Adjustment, 70 - 120 PSI, 64 - 70 Nails

The Hitachi NR83A2(S) is a 3-1/4 Inch Full Head Framing Nailer without Depth Adjustment. The tool is 7.9lbs, lightweight and well balanced for easy maneuverability. It has Tool-less depth adjustment to control depth of drive and a 2-piece steel magazine for replacement ease. It has a open nose design for easy extraction of a jammed nail and Rubber grip for added comfort. The framing nailer has a hardened aggressive toenail push lever which resists wear for prolonged life.

Denver Tools 120019 Brad Nailer

The Denver Tools 120021 Brad Nailer drives 18 gauge brad nails from 15mm to 50mm in length. A die cast aluminum body makes this nailer strong and light-weight while a rubber comfort grip handle provides improved control and comfort even during extended use. A touch-strike security system increases safety for the operator and a new 2 spring magizine pushes the nails smoothly. This nailer is ideal for door and window trims, decorative trim, cabinet work, finish paneling, frames and flooring.

Denver Tools 95439 Air Control Unit

The Denver Tools 95439 is an Air Control Unit. This air control unit consists of an air filter, air regulator and an oiler. It helps prevent costly damage to your air tools caused by rust, scale and moisture. It provides clean, dry, regulated air over a wide range of air flows. It is easy to install and maintain.

Denver Tools DBH24 24-Ounce Dead Blow Hammer

The Denver Tools DBH24 is a 24-ounce dead blow hammer. This steel shot filled, bright orange dead blow hammer is an essential part of anyone's toolbox.

Denver Tools ABG2 Air Blow Gun

The Denver Tools ABG2 is an Air Blow Gun featuring a comfortable vinyl coated control lever and durable chrome plated zince cast body.

Denver Tools RBC012 12-Inch Ratchet Bar Clamp

The Denver Tools RBC012 is a 12-Inch Ratchet Bar Clamp. It is a general purpose clamp that can be used on a variety of different tasks around the jobsite and the home.

Denver Tools 650 3/8-Inch Keyless Air Drill

The Denver Tools 650 is a 3/8-Inch Keyless Air Drill with an easily accessible forward/reverse switch making it easy to use with one hand.

Denver Tools AR2 Brass Air Regulator with Gauge

The Denver Tools AR2 is a Brass Air Regulator with Gauge. This regulator and guage allow you to monitor and control the air flow and pressure of your compressor.

Hitachi C15FB 15 Inch Heavy Duty Miter Saw - 15 Amp, 11 Positive Stops on Miter Index with Dynamic Electric Brake (No Bevel)

Hitachi C15FB 15-inch miter saw is a heavy-duty tool ideal for people who need to cut big post and beam stock. It has a powerful 15 amp with an electric brake to match its sturdy construction, and can cut material as thick as 4-3/4 inches and as wide as 7-1/2 inches at 0 degrees, and as wide as 5-15/32 at a 45 degree miter. It also comes with a clamp nearly hefty enough to be called a vise for holding the material tight to the fence, and has built-in extension wings to make work with long boards easier. The convenient thumb-operated blade guard lifter that makes it easier to work with big boards that might otherwise cause the guard to hang up. The miter gauge is riveted on, but the numbers and markings are not in relief, so it may need replacing in time as the paint wears off, although the riveted connection will make that replacement a tougher job than it should be. This saw has a vertical handle, like all the Hitachi miter saws, rather than the horizontal configuration many people prefer. This is a reliable miter saw thats designed and built tough enough to remain accurate under demanding job site conditions.

Denver Tools 703A 3/8-Inch Driver Air Ratchet Wrench

The Denver Tools 703A is a 3/8-Inch Driver Air Ratchet Wrench.

Denver Tools 113 Air Body Saw (Front Exhaust)

The Denver Tools 113 is a Air Body Saw with Front Exhaust.

Denver Tools DHTCZ-1 Zine Dual Head Tire Chuck

The Denver Tools DHTCZ-1 is a Zine Dual Head Tire Chuck for inflating tires.

Denver Tools TC1 Air Brass Tire Chuck

The Denver Tools TC1 is a Air Brass Tire Chuck. This solid brass air chuck has a standard 1/4-Inch NPT fitting and can be used to inflate various types of tires.

Denver Tools 94346 Mini Air Line Filter

The Denver Tools 94346 is a Mini Air Line Filter. This 40 micron particle filter can operate at up to 135 PSI and 140 degrees Fahrenheit. The reservoir of this filter is made of durable polycarbonate and features a push style drain.

Denver Tools 811B 1/4-Inch Air Die Grinder

The Denver Tools 811B is a 1/4-Inch Air Die Grinder. This powerful air die grinder is compact and lightweight making it easy to use for most grinding, deburring and polishing applications.

Denver Tools ABK2 Professional Air Brush Kit

The Denver Tools ABK2 is a Professional Air Brush Kit. This kit includes everything needed for painting model cars, trains and art detail projects, stenciling, stippling, base coats and much more.

Denver Tools 93703 3 Piece Ratchet Set

The Denver Tools 93703 is a 3 Piece Ratchet Set with 1/4-Inch, 3/8-Inch and 1/2-Inch drives. Each ratchet wrench is 8-Inches long and features a non-slip cushion grip for better grip and comfort.

Denver Tools 19212810 1/2-Inch Electric Impact Wrench

The Denver Tools 12810 is a 1/2-Inch Heavy Duty Industrial Electric Impact Wrench. The 19212810 Electric Impact Wrench has a reversiable 7.5amp moter and rugged die cast aluminum gear housing. A rocker trigger allows for easy one-hand operation.

Denver Tools 417002 3/8-Inch Electric Angle Drill

The Denver Tools 417002 is a 3/8-Inch Electric Angle Drill. This reversible drill features an easy to operate pull on/off paddle switch and a locking mechanism for continuous rotation. The ergonomic design and 55 degree angled chuck this drill easy to use in confined working areas.

Denver Tools 280 Air In-Line Sander

The Denver Tools 280 is an Air In-Line Sander. This in-line sander features a conveinent push trigger on the handle so you don't have to take your hands off the tool to flip a switch. There is also a standard knob in the front of the sander for two handed operation, giving you better control over the movement of the sander.

Denver Tools QC1 5-Piece Brass Quick Coupler Set

The Denver Tools QC1 is a 5-piece set of quick couplers.  These durable brass couplers allow you to easily and quickly connect your air tools to an air hose.

Denver Tools 610003 6 Ton Hydraulic Bottle Jack

The Denver Tools 610003 is a 6 Ton Hydraulic Bottle Jack. This compact jack is durable and easy to use.

Denver Tools 610004 8 Ton Hydraulic Bottle Jack

The Denver Tools 610004 is a 8 Ton Hydraulic Bottle Jack. This compact jack is durable and easy to use.

Denver Tools 610002 4 Ton Hydraulic Bottle Jack

The Denver Tools 610002 is a 4 Ton Hydraulic Bottle Jack. This compact jack is durable and easy to use.

Denver Tools 610001 2 Ton Hydraulic Bottle Jack

The Denver Tools 610001 is a 2 Ton Hydraulic Bottle Jack. This compact jack is durable and easy to use.

Denver Tools MSS10 5 Piece 1/8-Inch Die Grinding Stone Set

The Denver Tools MSS10 is a 5 Piece 1/8-Inch Die Grinding Stone Set with 5 assorted mounted grinding stones.

Denver Tools MSS101 5 Piece 1/4-Inch Die Grinding Stone Set

The Denver Tools MSS101 is a 5 Piece 1/4-Inch Die Grinding Stone Set with 5 assorted mounted grinding stones.

Delta 50-274 Mobile Base for Delta Tools

The Delta 50-274 is a mobile base for delta tools. Delta mobile base provides stationary machines with increased mobility for positioning them at any place, whether its across the shop or out-of-the-way for convenient storage. Delta mobile bases are made of heavy-gage steel and feature a foot-operated control lever that raises and lowers the base for easy movement and positioning.

Denver Tools 613002 2 Ton Engine Crane

The Denver Tools 613002 is a 2 Ton Engine Crane. This engine crane has four settings for half ton, full ton, one and a half ton and two ton loads and features a hydraulic action pump for easy lifting. The legs and easily fold up into the body for easy storage and four caster wheels are attached to the bottom of the main body so it can easily be rolled away.

Denver Tools 170028 Low Pressure Spray Gun

The Denver Tools 170028 Low Pressure Spray Gun may be used at work or home with highly efficient results. This product's high quality is due to the accuracy of each one of its components, as well as the materials composition, such as: treated and stainless steel and aluminum. This gun can be used in several applications, from high viscosity and slow drying paints (enamels), to heavy and quick drying paints (lacquers, synthetic enamels, latex, etc.), and a flexible fan pattern.

Spring Tools IPTS108 Impact Driver Set

Spring Tools IPTS108 is an Impact Driver Set. Combination impact tool and screwdriver for re-coining damaged, corroded or rusty fastener heads, and removing sticky, unmovable rusted fasteners or corroded threads. Pull back the ball holding the high tension spring, striking the fastener head, causing up to 5,000 lbs of impact on the fastener head - then use as screwdriver to remove fastener.

HUSQVARNA K960 RING PARTNER K950 RING promo video by www.toolhouse.gr

Couldn't find Hitachi Power Toolshere? Are you looking for something else? Search our partner sites: