Guard Dog Watches                                                                                                                                            

Guard Dog Watches tools and information

Find Guard Dog Watches at best prices and buy!

Bench Dog 40-022 ProGuard Multi-Use Freehand Accessory/Bit Guard

Bench Dog 40-022 ProGuard is essential for guarding Router body during freehand routing applications. The polycarbonate shield resists the impact of chips and flying debris, and the aluminum body ensures secure mounting. ProGuard has a built-in dust port. It is effective for extracting dust and debris away from router bits while freehand routing. ProGuard also works great as a starting pin. ProGuard bolts securely to the top of ProLift or ProPlate Aluminum.

Bench Dog 40-006 ProFence 36Inch For Router Tables 24Inch to 32Inch Wide

Bench Dog 40-006 ProFence is a top quality fence for router table system because of its design, strength, and quality of construction. ProFence utilizes a heavy duty aluminum extrusion that is fully machined on the front and bottom surfaces. This ensures that ProFence is flat, true, and square. Like the exclusive dual EZ-Load t-slots that accept Bench Dogs Feather-Loc featherboards, Panel-Loc panel hold-down, and Power-Loc auxiliary safety power switch. The MDF sub fences adjust without tools, perfect for zero clearance setup. ProFence comes with built-in jointing capability, dual position bit guard, and a dust collection port.

Bench Dog 10-025 Push-Loc Offset Push Stick W/Docking Station

Bench Dog 10-025 Push-Loc Offset Push Stick W/Docking Station keeps Push-Loc upright, always ready for use. This docking station is also a handy pencil tray, and it even holsters up to two tape measures. It is safer, more visible, and less likely to get caught on the blade guard. It works on router tables and jointers too. It gets your hands out of harms way, improves line-of-sight visibility, and allows to easily clear the blade guard. On router tables the offset works by preventing your hand from scraping the table top. The soft rubber sole helps prevent slippage, and the rear tail hook keeps Push-Loc secured to the work piece.

Festool 490121 Splinter Guard for PS 300/PSB 300 Jigsaw (20 Pack)

ToolKing.com promotional discount codes or coupons are NOT valid on Festool productsThe Festool 490121 is a pack of 20 splinter guards for PS 300/PSB 300 Jigsaw. The simple but effective splinter guard ensures perfect, splinter-free edges. The splinter guard is automatically cut to shape by the saw blade immediately after fitting. It gives clean cut edges and avoids the need for laborious reworking.

Festool 490120 Splinter Guard for PS 300/PSB 300 Jigsaw (5 Pack)

ToolKing.com promotional discount codes or coupons are NOT valid on Festool productsThe Festool 490120 is a pack of 5 splinter guards for PS 300/PSB 300 Jigsaw. The simple but effective splinter guard ensures perfect, splinter-free edges. The splinter guard is automatically cut to shape by the saw blade immediately after fitting. It gives clean cut edges and avoids the need for laborious reworking.

Delta 34-976 Uniguard Blade Guard for 10 inch Table Saws

The Delta 34-976 uniguard is a blade guard with splitter and anti-kickback fingers for 10 inch table saws. The blade guard does not have to be removed for non-through cutting operations. There is no mounting bracket behind the blade of the uniguard to interfere with dado cutting or molding operations. A separate, removable splitter with anti-kickback pawls is included for use during through-cutting thus allowing safer operation of the uniguard. The U-shaped support arm helps to cut to the full capacity of the fence. The Uniguard is used with Delta 10 inch Unisaws and Contractors Saws.

Pull?R Holding 54045 Bucket Boss Rear Guard Tooth Sheath

The PullR Holding 54045 is Bucket Boss Rear Guard Tooth Sheath. The padded and reinforced pouch easily slips into back pants pocket. 4 front pockets hold tools, pencils, wallet and more. The clip loop attaches tape roll and keys. It is abrasion-resistant material. Snap loop secures to belt or bag handle. Creates a mini tool belt.

Festool 491473 Plastic Splinter Guard for TS 55 and TS 75 (5 Pack)

ToolKing.com promotional discount codes or coupons are NOT valid on Festool productsThe Festool 491473 is a pack of 5 Plastic Splinter Guard for TS 55 and TS 75 Portable circular plunge-cut saw. It enables clean cuts on the right side of the blade.

Festool 488467 Splinter Guard for Guide Rail Edge, 118Inch, FS-SP 3000

ToolKing.com promotional discount codes or coupons are NOT valid on Festool productsThe Festool 483167 is a replacement splinter guard for guide rail edge. A rubber lip pressing onto the workpiece along the scribe line ensures< splinter-free cut edges. It gives clean cut edges and avoids the need for laborious reworking.

Bench Dog 10-012 Miter Slot Adapter

-For use with Feather-Loc Pair (stock number 40-011).-Fits in standard 3/4 x 3/8 miter gauge tracks.-Comes with taper-head bolt.-Durable ploymer.-Bench Dog stock number 10-012.

Bench Dog 40-020 ProPlate Phenolic Undrilled W/3.6Inch Bit Opening

Bench Dog 40-020 ProPlate Phenolic Undrilled W/3.6 Bit Opening are the sensible choice for most applications. They are tough, resistant to sag, and economical. ProPlates also work great for enlarging your routers base for freehand work.

Bench Dog 10-019 Pro-Cut Portable Saw Guide

Bench Dog 10-019 Pro-Cut Portable Saw Guide is the ultimate portable saw guide. It is easy to handle, and produces perfect 90 cross-cuts. It also reduces dangerous kickback. Built-in guides square Pro-Cut to the work piece, and two rubber strips prevent side-to-side movement.

Bench Dog 40-012 Feather-Loc Featherboard Tandem Pair Stacked

Bench Dog 40-012 Tandem Feather-Loc is used for holding taller stock. Great for resawing. Works with both 1/4 t-tracks and miter gauge slots. Comes with miter slot adapter. This is perfect for holding tall panels on the router table. It also works great for holding taller stock on table saw.

Bench Dog 40-038 Titer-Miter Miter Track (32Inch Length)

Bench Dog 40-038 Titer-Miter is a heavy duty extruded aluminum miter track for shop-made router table. The miter track is adjustable and fits all standard 3/4 by 3/8 bars. Titer-Miter also includes three 1/4 accessory slots for featherboards, switches, and jigs.

Bench Dog 10-013 T-Loc 1/4Inch Accessory T-Track 36Inch

Bench Dog 10-013 T-Loc is a horizontal 1/4 accessory t-track. The t-slot captures 1/4 hex head bolts used on many aftermarket accessories. It has many other uses, such as a guide, holding stops, or other fixtures. T-Loc is the best way to attach the Feather-Loc featherboards and other Bench Dog accessories to your shop made fence. T-Loc can also be mounted to many other brands of router table fences. T-Loc may also be an effective way to add a horizontal t-track to your table saws rip fence.

Bench Dog 40-028 Power-Loc Auxiliary Safety Power Switch

Bench Dog 40-028 Power-Loc is an auxiliary power switch that can be mounted almost anywhere. Its aluminum housing has six t-slots, and comes with an angle bracket for universal mounting. The lighted switch warns you when the power is on, crucial when using routers and other power tools that already come with their own power switch. Power-Loc also comes with a safety lock to help prevent accidental tripping. 15 amp, 120 volt, 8 cord. Nonmagnetic.

Bench Dog 40-017 ProPlate Aluminum Router Plate W/Reduction Rings

Bench Dog 40-017 ProPlate Aluminum Router Plate is ultimate in strength and versatility. It is perfect for using a variety of bit sizes. This Router Plate is hard anodized for long wear and feature three bit hole openings (2, 2.6, 3.6), two insert rings, 4 starting pin locations (starting pin included), and the ability to accept several options. This Insert plate is strong and the sag-resistant.

Bench Dog 40-011 Feather-Loc Featherboard Pair for 1/4Inch T-Slots

Bench Dog 40-011 Feather-Loc Featherboard Pair for 1/4 T-Slots is essential for holding the stock against the guide fence, Perfect for router tables, shapers, band saws, and table saws. Super tough polymer is specially formulated to hold its shape. The Single and Tandem models come with our exclusive miter slot adapter, fits standard 3/8 x 3/4 slots.

Bench Dog 40-002 Adapter -ProLift/ProLift Ni 4.2Inch Lift to 3.5Inch Router Motor

Bench Dog 40-002 is an adapter for 3.5 diameter fixed base routers. For use with Porter Cable 690, Bosch 1617 and 1618, and for DeWalt 610, 616 and 618 Routers.

Bench Dog 40-039 Zero Clearance Insert (Polymer Insert for ProLifts and ProPlate Alum)

Bench Dog 40-039 Zero Clearance Insert is to be used with small bits and small pieces of stock. It prevents small stock from falling into the router bit opening. Resists melting and wont harm your router bits.

Bench Dog 10-010 Crown Cut Crown Molding Cutting Jig

Bench Dog 10-010 Crown Cut Crown Molding Cutting Jig. Crown-Cut eliminates the complication of cutting crown and cove molding, giving perfect miters, every time. Crown-Cut holds the molding at its intended angle while cutting. No more compound cuts and tedious trial and error. Before Crown-Cut, miscalculated compound cuts produced sloppy miters that screamed for caulk and paint. Crown-Cut requires only a simple 45 miter cut that any miter saw can do. For a professional looking job, cut crown and cove the easy way.

Bench Dog 40-016 ProLift (Max) Router Lift System

Bench Dog 40-016 is Bench Dogs new cast iron top-adjust router system for fixed base routers. ProLift gives easiest bit changes and the ability to zero-out and accurately set bit height. The heavy duty ProLift Nis core is a cast-iron motor housing, finned for cooling, with bronze bushings that adjust up and down on two hardened steel columns, guided by an 8 t.p.i. acme threaded shaft. This core is anchored to a 3/8-inch thick, cast iron, hard chrome plate that accepts three supplied steel insert rings (2-, 2.625- and 3.75-inch i.d.) and one supplied threaded insert pin. The insert pin mounts at four locations for freehand work. ProLift Ni is designed to accommodate for the largest routers and is built to last a lifetime.

Bench Dog 40-031 ProMAX Table/Ext Cast Iron Router Top W/ProFence

Bench Dog 40-031 ProMAX expands the table saw versatility by adding a professional-grade router table in place of the left extension wing. ProMAX is perfect for shops where space is tight. Other added benefits include expanded router table depth and an additional miter slot for cross-cut sled use.

Bench Dog 40-041 ProPlate Acrylic (Accepts Porter Cable Style Guide Bushing

Bench Dog 40-041 Acrylic ProPlate is designed for use with a Porter-Cable style guide bushing (PCGB), making this plate perfect for use with dovetail jigs, as well as enlarging routers sub base. This see-through plate is ideal for freehand work.

Bench Dog 40-027 ProPlate Phenolic Group 1 Predrilled W/3.6Inch Bit Opening

Bench Dog 40-027 ProPlate Phenolic Group 1 Predrilled W/3.6 Bit Opening are the sensible choice for most applications. They are tough, resistant to sag, and economical. ProPlates also work great for enlarging your routers base for freehand work.

Bench Dog 40-026 ProPlate Phenolic Group 1 Predrilled W/2Inch Bit Opening

Bench Dog 40-026 ProPlate Phenolic Group 1 Predrilled W/2 Bit Opening are the sensible choice for most applications. They are tough, resistant to sag, and economical. ProPlates also work great for enlarging your routers base for freehand work.

Acme® A540BL 10-130 lbs. Heavy-Duty Dual-Foot Tire Gauge

New wheel guard prevents the scratching or nicking of expensive aluminum wheels

Bench Dog 40-001 ProTop Contractor 16Inch X 24Inch Portable Router Table Sys

ProTop Contractor is a job site router table. Its unique forward offset router location and dual position fence give it as much usable table surface as most full-size router tables. Moreover, the 15 cabinet height will accept all router, not to mention Bench Dogs ProLift. ProTop Contractor fits all relevant Bench Dog accessories. The Baltic Birch enclosed cabinet reduces dust and noise, and the rubber feet prevent table slippage.

Bench Dog 40-075 ProPlate Aluminum Group 2 Predrilled W/Bit Hole Reduction Rings

Bench Dog 40-075 ProPlate Aluminum Router Plate is ultimate in strength and versatility. It is perfect for using a variety of bit sizes. This Router Plate is hard anodized for long wear and feature three bit hole openings (2, 2.6, 3.6), two insert rings, 4 starting pin locations (starting pin included), and the ability to accept several options. This Insert plate is strong and the sag-resistant.

Bench Dog 10-001 Blade-Loc Blade Changing Tool

Blade-Loc is a revolutionary blade changing tool that provides safer changes for table saw blades. It evenly grips the blade around its perimeter and does not bend it, Blade-Loc protects your hands. It is made from a specially formulated polymer.

Woods® 201 25' 18 Gauge 2-Conductor Work Light

Insulated guard Dual hook system allows hanging from guard or handle Convenient on/off switch 2-conductor, 75W bulb rating UL Listed Meets OSHA specifications for temporary lighting

Bosch 1873-8 Factory Recondition 7 inch Angle Grinder, 8500 RPMS

The Bosch 1873-8 Factory Reconditioned 7 inch Angle Grinder with 8500 RPMS is tool-free adjustable guard for quick guard installation and adjustments. It features Rat Tail Handle.

Bosch 4100DG-09 10-Inch Worksite Table Saw With Digital Rip Fence And Gravity-Rise Wheeled Stand

Cutting edge and easy-to-use new featuresSmart Guard System allows superior cutting controlPrecise digital measuring display

Jet 708455 JJ-6OS 6Inch Open Stand Jointer with Two Way Tilting Fence

The Jet 708455 JJ-6OS is a 6 Open Stand Jointer with Two Way Tilting Fence. It has a spring loaded front blade guard and rear blade guard offer maximum protection. A dust chute with a 4 port offers efficient dust/chip collection. A totally enclosed

MK Diamond 158436 MK-1225 10Inch Hot Dog Porcelain & Tile Wet Cutting Diamond Blade

Premium grade thin-rim blades for porcelain & vitreous tile.

MK Diamond 158434 MK-1225 7Inch Hot Dog Porcelain & Tile Wet Cutting Diamond Blade

Premium grade thin-rim blades for porcelain & vitreous tile.

DeWalt DW3970 12Inch High Tension Hack Saw Frame

The DeWalt DW3970 is a 12 High Tension Hack Saw Frame. With aluminum and steel components, it is built to withstand the use and abuse found on the job-site. It also features hacksaw blade storage, a quick change blade changing mechanism, a robust tension adjust knob, comfortable soft-feel grips, 45 and 90 cutting for flush cutting capability, jab saw capability and a removable hand guard. The hand guard protects the user from cuts and scrapes often incurred upon material breakthrough.

DeWalt D28494SR Factory Reconditioned D28494S 7-Inch Heavy-Duty Angle Grinder

The DeWalt D28494S is a Factory Reconditioned 7 inch Heavy-Duty Angle Grinder. A high power 4 HP, 6000 RPM motor with overload protection provides higher operating speeds under load. It has an epoxy coated field and armature which provide long service life against abrasion from airborne debris. The grinder has a keyless adjustable guard, it allows for guard adjustments to be made without any tools. A low profile gear case allows for work in tight areas.

Grip 65140 6-Piece Precision Screwdriver Set

Hardened and tempered carbon steel blades Black oxide finish Free turning speed cap for easy, accurate driving Ideal for computers, watches, and glasses Includes Flat (1.4mm x 1, 2mm x 1, 2.4mm x 1-1/8, 3mm x 1-1/4) and Phillips (#1 x 1-1/8, #0 x 1-1/8)

Makita MT240 Maktec Factory Reconditioned 14-Inch Portable Cut-Off Saw

Makita MT240 Factory Reconditioned Maktec Portable Cut-Off Saw has a huge 2,000-Watt motor which makes cutting easy. It has a cutting capacity up to 4-1/2-inches in pipe. It has a built in spark deflection guard for your safety and a quick release vice with adjustable guide plate for cutting angles up to 45.

AO Safety 90514 General Purpose Safety Glasses

Anti-fog coating to prevent fogging in humid conditionsScratch-resistant coating to help prevent scratchingTough, one-piece wraparound construction provides durable front and side protectionBuilt-in brow guard to protect from overhead hazardsMeets ANSI Z87.1 and CSA Z94.3 industrial safety standards

Chicago Pneumatic CP7901K Super Duty Reciprocating Saw Kit

-Lowest vibration on the market-Power at 10,000 strokes per minute allows you to cut through material with ease-Adjustable guard/guide allows operator to set depth of cut-Ergonomic design for comfort and easy handling-Premium tool for body, exhaust and muffler work

Denver Tools 813B 3-Inch Air Cut-Off Tool

The Denver Tools 813B is a 3-Inch Air Cut-Off Tool. This cut-off tool is designed to cut through metal piping, mufflers and tail pipes quickly and efficiently and features a plastic guard to protect you from sparks and a rubber grip handle that allows for better control and comfort.

DeWalt D28474WR Factory Reconditioned D28474W 7-Inch Large Angle Grinder, 8000 RPM, 15.0 Amps

The DeWalt D28474W factory reconditioned large angle grinder has the right combination of power, torque and speed. Powered by a new breed of 4 HP motors, the 15 Amp AC/DC DeWalt grinder runs cool and efficiently to provide maximum power, even under heavy loading. Combined with high power, the helical cut-steel gears provide high torque for faster in-use operating speeds. The tool is protected from abrasion through the use of labyrinth protected and sealed bearings and electrostatic coated motor windings. The keyless adjustable guard allows users to make guard adjustments without looking for tools.

Milwaukee 6154-20 4-1/2Inch Super Magnum Grinder/Sander w/Electronic Feedback

Offers extra heavy duty grinding capability in a compact body grip ergonomic design12 amp, 2.1 HP AC motor. Dial speed control 4,000 - 11,000 RPM.Electronic feedback maintains speed and torque under load conditions. Soft start.Power to weight ratio makes it perfect for those extra heavy duty confined area grinding projectsSpiral cut bevel gears for optimum transmission of torque to the work piece. All ball and roller bearing construction.Integrated lock-off button is featured in the paddle switch. Lock-on button is also available for continuous use operations.Comfortable body grip style is easy to hold onto, side handle can be attached in three positions and allows for maximum operator controlWheel guard can be moved around the spindle (without the use of tools) for greatest operator protectionDouble insulated. 10 ft., 2-wire Quik-Lok cord set.Sold as a grinder with guard, this tool can be used as a sander when a 4-1/2 backing pad and disc are attachedIncludes Tool, guard, grinding wheel, spanner wrench and side handle

Milwaukee 6155-20 5Inch Magnum Grinder/Sander

Offers extra heavy duty grinding capability in a compact body grip ergonomic design 12 amp, 2.1 HP AC/DC motor, 11,000 RPM Power to weight ratio makes it perfect for those extra heavy duty confined area grinding projects Spiral cut bevel gears for optimum transmission of torque to the work piece. All ball and roller bearing construction. Integrated lock-off button is featured in the paddle switch. Lock-on button is also available for continuous use operations. Comfortable body grip style is easy to hold onto, side handle can be attached in three positions and allows for maximum operator control Wheel guard can be moved around the spindle (without the use of tools) for greatest operator protection Double insulated Sold as a grinder with guard, this tool can be used as a sander when a 4-1/2 backing pad and disc are attached Includes Tool, guard, grinding wheel, spanner wrench and side handle

Milwaukee 6156-20 5Inch Super Magnum Grinder/Sander w/Electronic Feedback

Offers extra heavy duty grinding capability in a compact body grip ergonomic design12 amp, 2.1 HP AC motor. Dial speed control 4,000 - 11,000 RPM.Electronic feedback maintains speed and torque under load conditions. Soft start.Power to weight ratio makes it perfect for those extra heavy duty confined area grinding projectsSpiral cut bevel gears for optimum transmission of torque to the work piece. All ball and roller bearing construction.Integrated lock-off button is featured in the paddle switch. Lock-on button is also available for continuous use operations.Comfortable body grip style is easy to hold onto, side handle can be attached in three positions and allows for maximum operator controlWheel guard can be moved around the spindle (without the use of tools) for greatest operator protectionDouble insulated. 10 ft., 2-wire Quik-Lok cord set.Sold as a grinder with guard, this tool can be used as a sander when a 4-1/2 backing pad and disc are attachedIncludes Tool, guard, grinding wheel, spanner wrench and side handle

Powermatic 1791289 COS18R 18Inch Right Hand Cut-Off Saw, 10 HP, 3 Phase, 230-460V

The Powermatic 1791289 is a 18" Right Hand Cut-Off Saw. The saw is powered by a big 10 HP motor and is designed for production cutting of up to 70 cycles a minute. The saw is constructed with a cast iron table and heavy steel plate body, built for production cutting. The blade is mounted to a chrome steel alloy arbor that is precision ground and balanced. The arbor is supported by massive bearings and full power of the 10 HP motor is transmitted to the blade. Each cutting cycle is cushioned by a large shock absorber and cycle times are easily adjustable. A large 4" dust collection port keeps the work area clear. Blade changes are accomplished quickly through the large side access door. Standard equipment includes a pneumatic safety guard on the inside and a full basket guard on the finish side. The heavy blade/clamp assembly is quickly positioned for different jobs.

DeWalt DW828R Factory Reconditioned DW828 6-Inch Cut-Off Tool with Paddle Switch

DeWalt DW828 Factory Reconditioned Cut-Off Tool is Powered by a 9.0 Amp, 9,000 rpm motor. The DW828 is the industry's first 6 cut-off tool with a non lock-on paddle switch. The DW828 provides best-in-class durability through its dust-sealed switch, automatic turn-off brushes, and spiral bevel cut steel gear. For enhanced ergonomics, the DW828 includes a keyless adjustable Type 1 guard, a low-profile, air-cooled gear case that allows the tool to get into tighter spaces, anti-lockup flanges that allow you to change accessories without the need for a wrench, a protected side-positioned spindle lock for easier wheel changes, and a vibration-reducing rubber grip side handle. Includes wrench, anti-lockup flanges, keyless adjustable guard, side handle.

Powermatic 1791294 COS18L 18Inch Left Hand Cut-Off Saw, 10 HP, 3 Phase, 230-460V

The Powermatic 1791294 is a 18" Left Hand Cut-Off Saw. The saw is powered by a big 10 HP motor and is designed for production cutting of up to 70 cycles a minute. The saw is constructed with a cast iron table and heavy steel plate body, built for production cutting. The blade is mounted to a chrome steel alloy arbor that is precision ground and balanced. The arbor is supported by massive bearings and full power of the 10 HP motor is transmitted to the blade. Each cutting cycle is cushioned by a large shock absorber and cycle times are easily adjustable. A large 4" dust collection port keeps the work area clear. Blade changes are accomplished quickly through the large side access door. Standard equipment includes a pneumatic safety guard on the inside and a full basket guard on the finish side. The heavy blade/clamp assembly is quickly positioned for different jobs.

CRITTER GUARD-CONTAINER GARDENING PROTECTOR

Couldn't find Guard Dog Watcheshere? Are you looking for something else? Search our partner sites:

                                                                                                              Guard Dog Watches