Great Neck Tools                                                                                                                                                

Great Neck Tools tools and information

Find Great Neck Tools at best prices and buy!

Great Neck 350 3-1/2Inch Chisel Brick

The Great Neck 350 is a 3-1/2 Chisel Brick. It is used for scoring and cutting brick and masonry block. It must be used with a hand drilling hammer or small sledge.

Great Neck TL4C Tack Lifter

-Plastic handle with rustproof plated blade firmly imbedded-Full 1/4 thick heavy duty shank lifts tacks, small nails, brads-Smoothly polished back and face-Carded

Great Neck 25052 Air Conditioning and Fuel Line Disconnect Tool Set

The Great Neck 25052 is an Air Conditioning and Fuel Line Disconnect Tool Set. The air conditioning and fuel line disconnect tool set easily disconnects air conditioning lines and quick connect fuel lines. It includes sizes 5/16 3/8, 1/2, 5/8, 3/4, 7/8.

Great Neck 914M 9-Pc 1/4Inch Drive Shallow Metric Socket Set

The Great Neck 914M is a 9-Pc 1/4 Drive Shallow Metric Socket Set. It has 1/4 Drive 6 point chrome vanadium steel construction. The sockets feature Posi-grip No Slip design. The socket wall design provides superior gripping power without rounding the fastener points. Torque is applied to the walls of the fastener head.

Great Neck 914SA 9-Pc 1/4Inch Drive Shallow SAE Socket Set

The Great Neck 914SA is a 9-Pc 1/4 Drive Shallow SAE Socket Set. It has 1/4 Drive 6 point chrome vanadium steel construction. The sockets feature Posi-grip No Slip design. The socket wall design provides superior gripping power without rounding the fastener points. Torque is applied to the walls of the fastener head.

Great Neck 33006 36 LED Rechargeable Work Light

The Great Neck 33006 is a 36 LED Rechargeable Work Light. The rechargeable work lamp has 36 high intensity LED bulbs for maximum visibility. It runs continuously for 3 hours powered by a 4.8V rechargeable battery. The light completely recharges in 2 to 3 hours. It includes AC and DC charging adapters. The light has lightweight durable comfort grip handle, powerful magnet on back and hanging hook for hands free operation.

Great Neck® 10229 Sliding T-Bevel

Sliding T-Bevel2-1/4 width1 depth

Great Neck® 10231 Squangle (Square-Angle) Carded

14 squangle (square-angle) carded 7 width 1-1/4 depth

Great Neck SC4C 4in Scratch Sawl Carded

4 Scratch Awl Carded

Great Neck® 10198 9Inch Magnetic Torpedo Level

9 magnetic torpedo level 3-1/4 width 3/4 depth

Great Neck® 10440 24Inch Aluminum Rafter Square

24 aluminum rafter square 16 width 1/4 depth

Great Neck GN25738 Small Nut splitter

-Wont damage bolt threads. Work on smaller nuts by using stems.

Great Neck CS6 6pk Coping Saw Blade

-Heat treated steel blades-Length 6-1/2-Fits CP9-#28 and most popular brands

Great Neck® 10747 24Inch Steel Carpenter Square

24 carpenter square 16 width1/4 depth

Great Neck® 10155 Small Angle Finder

7 small angle finder 5 width 3/4 depth

Great Neck 12116 Mini Lock Back Utility Knife

-Razor Sharp Knife-Quick Change Mechainism-One Hand Opening-Lightweight Aluminum-Key Chain

Great Neck 12119 Folding Quick Change Lock-Back Utility Knife

-Light-weight aluminum handle with belt clip.-Quick change blade mechanism.-One handed opening operation.-Spring blade release.-Store up to five blades in handle.-Includes five blades.

Denver Tools 502 150mm Air Hammer

The Denver Tools 502 is a 150mm Air Hammer which comes with 4 chisels.

Denver Tools 301 Jitterburg Sander

The Denver Tools 301 is a pneumatic Jitterburg Sander. This traditional style jitterbug sander with metal construction features a rubber grip and locking clamps to give you a good grip on both the tool and the sandpaper. This sander can be used on many materials including paint, metal and fiberglass.

Denver Tools 816A Air Angle Die Grinder

The Denver Tools 816A is a Air Angle Die Grinder. The angled head provides access to hard to reach places.

Denver Tools 653A 3/8-Inch In-line Air Drill

The Denver Tools 653A is a 3/8-Inch In-line Air Drill with variable speed. This small drill makes drilling in tight spaces easy.

Denver Tools 93486 Mini Grease Gun

The Denver Tools 93486 is a Mini Grease Gun. This small, one-hand operated grease gun is perfect for greasing in tight spaces.

Denver Tools RM016 16 oz Rubber Mallet

The Denver Tools RM016 is a 16 oz Rubber Mallet. This mallet features a double-faced rubber head with a rubber gripped handle.

Denver Tools SC02 1/4-Inch Swivel Connector

The Denver Tools SC02 is a 1/4-Inch Swivel Connector. This connector has a 360 swivel to prevent the air hose from kinking.

Denver Tools 120019 Brad Nailer

The Denver Tools 120021 Brad Nailer drives 18 gauge brad nails from 15mm to 50mm in length. A die cast aluminum body makes this nailer strong and light-weight while a rubber comfort grip handle provides improved control and comfort even during extended use. A touch-strike security system increases safety for the operator and a new 2 spring magizine pushes the nails smoothly. This nailer is ideal for door and window trims, decorative trim, cabinet work, finish paneling, frames and flooring.

Denver Tools 95439 Air Control Unit

The Denver Tools 95439 is an Air Control Unit. This air control unit consists of an air filter, air regulator and an oiler. It helps prevent costly damage to your air tools caused by rust, scale and moisture. It provides clean, dry, regulated air over a wide range of air flows. It is easy to install and maintain.

Denver Tools DBH24 24-Ounce Dead Blow Hammer

The Denver Tools DBH24 is a 24-ounce dead blow hammer. This steel shot filled, bright orange dead blow hammer is an essential part of anyone's toolbox.

Denver Tools ABG2 Air Blow Gun

The Denver Tools ABG2 is an Air Blow Gun featuring a comfortable vinyl coated control lever and durable chrome plated zince cast body.

Denver Tools RBC012 12-Inch Ratchet Bar Clamp

The Denver Tools RBC012 is a 12-Inch Ratchet Bar Clamp. It is a general purpose clamp that can be used on a variety of different tasks around the jobsite and the home.

Denver Tools 650 3/8-Inch Keyless Air Drill

The Denver Tools 650 is a 3/8-Inch Keyless Air Drill with an easily accessible forward/reverse switch making it easy to use with one hand.

Denver Tools AR2 Brass Air Regulator with Gauge

The Denver Tools AR2 is a Brass Air Regulator with Gauge. This regulator and guage allow you to monitor and control the air flow and pressure of your compressor.

Denver Tools 703A 3/8-Inch Driver Air Ratchet Wrench

The Denver Tools 703A is a 3/8-Inch Driver Air Ratchet Wrench.

Denver Tools 113 Air Body Saw (Front Exhaust)

The Denver Tools 113 is a Air Body Saw with Front Exhaust.

Denver Tools DHTCZ-1 Zine Dual Head Tire Chuck

The Denver Tools DHTCZ-1 is a Zine Dual Head Tire Chuck for inflating tires.

Denver Tools TC1 Air Brass Tire Chuck

The Denver Tools TC1 is a Air Brass Tire Chuck. This solid brass air chuck has a standard 1/4-Inch NPT fitting and can be used to inflate various types of tires.

Denver Tools 94346 Mini Air Line Filter

The Denver Tools 94346 is a Mini Air Line Filter. This 40 micron particle filter can operate at up to 135 PSI and 140 degrees Fahrenheit. The reservoir of this filter is made of durable polycarbonate and features a push style drain.

Denver Tools 811B 1/4-Inch Air Die Grinder

The Denver Tools 811B is a 1/4-Inch Air Die Grinder. This powerful air die grinder is compact and lightweight making it easy to use for most grinding, deburring and polishing applications.

Denver Tools ABK2 Professional Air Brush Kit

The Denver Tools ABK2 is a Professional Air Brush Kit. This kit includes everything needed for painting model cars, trains and art detail projects, stenciling, stippling, base coats and much more.

Denver Tools 93703 3 Piece Ratchet Set

The Denver Tools 93703 is a 3 Piece Ratchet Set with 1/4-Inch, 3/8-Inch and 1/2-Inch drives. Each ratchet wrench is 8-Inches long and features a non-slip cushion grip for better grip and comfort.

Grip 55110 24Inch Magnetic Tool Holder Strip

A great addition for any shop or tool areaKeeps tools off of the floor and right there ready to usePowerful magnets hold tools in placeComes complete with installation hardware24 long

Denver Tools 19212810 1/2-Inch Electric Impact Wrench

The Denver Tools 12810 is a 1/2-Inch Heavy Duty Industrial Electric Impact Wrench. The 19212810 Electric Impact Wrench has a reversiable 7.5amp moter and rugged die cast aluminum gear housing. A rocker trigger allows for easy one-hand operation.

Denver Tools 417002 3/8-Inch Electric Angle Drill

The Denver Tools 417002 is a 3/8-Inch Electric Angle Drill. This reversible drill features an easy to operate pull on/off paddle switch and a locking mechanism for continuous rotation. The ergonomic design and 55 degree angled chuck this drill easy to use in confined working areas.

Denver Tools 280 Air In-Line Sander

The Denver Tools 280 is an Air In-Line Sander. This in-line sander features a conveinent push trigger on the handle so you don't have to take your hands off the tool to flip a switch. There is also a standard knob in the front of the sander for two handed operation, giving you better control over the movement of the sander.

Denver Tools QC1 5-Piece Brass Quick Coupler Set

The Denver Tools QC1 is a 5-piece set of quick couplers.  These durable brass couplers allow you to easily and quickly connect your air tools to an air hose.

Denver Tools 610003 6 Ton Hydraulic Bottle Jack

The Denver Tools 610003 is a 6 Ton Hydraulic Bottle Jack. This compact jack is durable and easy to use.

Denver Tools 610004 8 Ton Hydraulic Bottle Jack

The Denver Tools 610004 is a 8 Ton Hydraulic Bottle Jack. This compact jack is durable and easy to use.

Denver Tools 610002 4 Ton Hydraulic Bottle Jack

The Denver Tools 610002 is a 4 Ton Hydraulic Bottle Jack. This compact jack is durable and easy to use.

Denver Tools 610001 2 Ton Hydraulic Bottle Jack

The Denver Tools 610001 is a 2 Ton Hydraulic Bottle Jack. This compact jack is durable and easy to use.

Denver Tools MSS10 5 Piece 1/8-Inch Die Grinding Stone Set

The Denver Tools MSS10 is a 5 Piece 1/8-Inch Die Grinding Stone Set with 5 assorted mounted grinding stones.

Denver Tools MSS101 5 Piece 1/4-Inch Die Grinding Stone Set

The Denver Tools MSS101 is a 5 Piece 1/4-Inch Die Grinding Stone Set with 5 assorted mounted grinding stones.

Kayla MAKING OUT REALLY NASTILY!

Couldn't find Great Neck Toolshere? Are you looking for something else? Search our partner sites:

                                                                                                          Great Neck Tools