Drill Accessories tools and information

Find Drill Accessories at best prices and buy!

Skil 90842 42 Piece Quick-Change Drill/Drive Set

Spade bits feature tappered edge design for clean cutting into woodSpade-style countersinks pre-drill holes to fit screw head flush surfaceMasonry drill bits for drilling into brick, masonry, and plasterHex shank design optimizes drill powerEZ-Lock Quick-Change accessories are secure and accurateFor use with EZ-Lock Eazy-Change chuck and all other 1/4 Quick-Change and standard chucksHex shank degign holds securley in chuckBits stay on-center with no slippageChange from drilling holes to driving screws in a snap

DeWalt DW124R Factory Reconditioned DW124 Heavy-Duty 1/2-Inch Stud & Joist Right Angle Drill

DeWalt DW124 1/2 factory reconditioned angle drill is designed for the plumbers and electricians to drill large holes safer and faster. It drills holes up to 2-9/16 at 1200 RPM and larger holes up to 4-5/8, at 300 RPM. The mechanical clutch in the 300 RPM setting will engage at 70 ft-lbs of torque, preventing kick-back. The joist and stud drill's extra length provides more leverage, while it's compact head will fit with accessories between standard studs.

DeWalt DW960K-2R Factory Reconditioned DW960K-2 18-Volt 3/8-Inch Cordless Right Angle Drill/Driver Kit

The DeWalt DW960K-2 is a Factory Reconditioned 18V 3/8 inch Cordless Right Angle Drill/Driver Kit. The drill/driver kit delivers 310 in-lbs in low range 0-500 and in high speed 0-1500 it delivers 80 in-lbs of torque. The three position rubber paddle switch allows users to adjust their hand for maximum control in different applications. The 3/8 inch chuck accepts a wide variety of drill bits and other accessories.

Milwaukee 0234-6 Heavy-Duty 1/2Inch Reversible Magnum Drill, 0-850 RPM, 5.5 Amps

Milwaukee 0234-6 is a Heavy-Duty 1/2 Reversible Magnum Drill. This heavy duty Magnum drill is built for industrial/construction applications. It features raw power with a Milwaukee built 5.5 Amps motor, 0-850 RPM trigger speed control, reversing, and a Quik-Lok cord that can be quickly removed from the drill for storage or service replacement. Another exclusive feature is the brush cartridge system, with a set of spare brushes, that allows to change brushes in less than one minute. This tool can be used with a variety of accessories to drill into wood, metal, plastics and composites.

DeWalt DW124K Heavy-Duty 1/2Inch Stud & Joist Right Angle Drill Kit, 300/1200 RPM, 11.5 Amps

DeWalt 1/2 DW124K is designed for plumbers and electricians to drill larger holes safer and faster. It drills up to 2-9/16 holes at 1200 RPM or larger holes up to 4-5/8 at 300 RPM. The mechanical clutch in the 300 RPM setting will engage at 70 ft-lbs of torque, preventing kickback. The extra length of the joist and stud drill provides more leverage, while its compact head will fit with accessories between standard studs. It includes two-position side handle, chuck key and holder, bail handle and kit box.

Flex STN300 46-Inches Core Drill Stand for the BSW3023C Core Drill

The Flex STN300 is a Core Drill Stand for use with the Flex BSW3023C Core Drill. The STN300 Core Drill Stand helps stabilize the BSW3023C Core Drill by turning it into a stationary model for drilling into concrete. It is also used for orienting and holding the core-drilling apparatus for sampling concrete pilings. The 46-Inch tall stand is equipped with a quick-clamp mounting mechanism and an anchor plate to hold the core drill in position.

Denver Tools 653A 3/8-Inch In-line Air Drill

The Denver Tools 653A is a 3/8-Inch In-line Air Drill with variable speed. This small drill makes drilling in tight spaces easy.

DeWalt DW2567 6 Countersink with 9/64Inch Drill Bit

The DeWalt DW2567 #6 Countersink with 9/64 Drill Bit. The countersink with bit offers drill, countersink and counterbore in one step. The four-cutter countersink and tapered drill bit provide superior speed and ideal finish.

Wilmar W9003 3-Piece Titanium Step Drill Set

Wilmar W9003 is a 3-Piece Step Drill Set made of titanium.

Steel City 25415 Drill Press Laser

-Simply line your work up and know exactly where the bit is going to drill. Battery operated laser mounts easily to your drill press column.

Milwaukee 1630-1 1/2Inch Compact Drill

The Milwaukee 1630-1 is easy to use with its extra long handles. This drill is made for two handed operation which is nice for large hole drilling or material mixing, this drill has the power to handle it. This unit features a 900 rpm operating speed, a good speed for smaller bits and less torque applications.

DeWalt D5120 Universal Drill Holster

The DeWalt D5120 Universal Drill Holster. The holster is made from heavy-duty ballistic-grade nylon, so its lightweight and it offers real abrasion and moisture resistance. The pouch boasts solid steel rivets and rugged double stitching, plus a reinforced belt tunnel so drill will never fall or snag itself free. The holster works great for left or right-handed users and it has a nylon retention strap and buckle to keep the drill securely in place when not in use.

Makita D-00826 3/16 x 4-1/2 SDS Drill Bit

The D-00826 3/16 x 4-1/2 SDS Drill Bit.

Makita D-00882 1/4 x 8-1/4 SDS Drill Bit

The D-00882 1/4 x 8-1/4 SDS Drill Bit.

Denver Tools 417002 3/8-Inch Electric Angle Drill

The Denver Tools 417002 is a 3/8-Inch Electric Angle Drill. This reversible drill features an easy to operate pull on/off paddle switch and a locking mechanism for continuous rotation. The ergonomic design and 55 degree angled chuck this drill easy to use in confined working areas.

Irwin 80185 13 PC. Tap & Drill Set

These drill and tap combinations produce a thread that is strong and easy to tap135 split point HSS drill bits ensure fast, precise drillingHigh carbon steel plug taps are ideal for general purpose threading

Milwaukee 49-22-1550 Large Drill Chuck Kit

The Milwaukee 49-22-1550 Large Drill Chuck Kit converts the Milwaukee 2404-1 Super Hole Shooter Drill from a no. 3 internal morse taper spindle to a 3/4" jawed chuck. The 49-22-1550 includes a 48-66-2000 Chuck and a 48-07-0100 Arbor.

Irwin 80187 13 PC. Tap & Drill Set

These drill and tap combinations produce a thread that is strong and easy to tap135 split point HSS drill bits ensure fast, precise drillingHigh carbon steel plug taps are ideal for general purpose threading

Chicago Pneumatic 7300R 1/4Inch Reversing Mini Drill

-Chicago Pneumatic 7300R 1/4 Reversing Mini Drill-General purpose, reversible drill. 2,700 rpm-Compact and lightweight for easy handling-Plenetary gearing with brass bushings-Jacobs chuck 1/4 inch capacity

Performance W3939 2-1/2Inch Drill Press Vise

The Performance W3939 is a 2-1/2" Drill Press Vise. The drill press vises feature sturdy construction and etched 2-1/2" jaws for a secure grip. The slotted mounting holes allow for quick easy vise alignment adjustments.

Festool 564178 12V Cordless Drill

ToolKing.com promotional discount codes or coupons are NOT valid on Festool products-The very compact, remarkably light C12 offers all the power, control, torque, and features you need for demanding jobs. Its the lightest 12v on the market and the first cordless drill with a brushless motor. Lift a pound less each time you drill or drive without sacrificing any power. Thats 200 fewer pounds in a typical day. As for longevity, the C12 will drive up to one million screws before it needs to be replaced.

Festool 564180 12V Cordless Drill

ToolKing.com promotional discount codes or coupons are NOT valid on Festool products-The very compact, remarkably light C12 offers all the power, control, torque, and features you need for demanding jobs. Its the lightest 12v on the market and the first cordless drill with a brushless motor. Lift a pound less each time you drill or drive without sacrificing any power. Thats 200 fewer pounds in a typical day. As for longevity, the C12 will drive up to one million screws before it needs to be replaced.

DeWalt DW2568 #8 Countersink with 11/64Inch Drill Bit

The DeWalt DW2568 is a #8 Countersink with 11/64" Drill Bit. The countersink with tapered drill bit is ideal for fine wood drilling and provides user with superior speed while leaving an ideal finish. Using a four-cutter countersink and 11/64" drill bit, the product is uniquely designed to allow to drill, countersink and counterbore all in one step.

DeWalt DW2569 #10 Countersink with 3/16Inch Drill Bit

The DeWalt DW2569 is a #10 Countersink with 3/16" Drill Bit. The countersink with tapered drill bit is ideal for fine wood drilling and provides user with superior speed while leaving an ideal finish. Using a four-cutter countersink and 3/16" drill bit, the product is uniquely designed to allow to drill, countersink and counterbore all in one step.

Kreg KJSCD Stop Collar for 3/8Inch Drill Bit

-Stop collar for 3/8 step drill bit-For setting proper drilling depth-Allen wrench included

Makita 711147-A-25 1/4-Inch x 4-Inch SDS Drill Bits 25 Pack

The Makita 711147-A-25 is a pack of 25 1/4-Inch x 4-Inch SDS Drill Bits.

Makita 711148-A-25 1/4-Inch x 6-Inch SDS Drill Bits 25 Pack

The Makita 711148-A-25 is a pack of 25 1/4-Inch x 6-Inch SDS Drill Bits.

Makita D-01002 5/8 x 8 SDS Drill Bit

The Makita D-01002 5/8 x 8 SDS Drill Bit.

Makita 711161-A-25 1/2-Inch x 6-Inch SDS Drill Bits 25 Pack

The Makita 711161-A-25 is a pack of 25 1/2-Inch x 6-Inch SDS Drill Bits.

Makita 711155-A-25 3/8-Inch x 6-Inch SDS Drill Bits 25 Pack

The Makita 711155-A-25 is a pack of 25 3/8-Inch x 6-Inch SDS Drill Bits.

Makita D-00935 3/8 x 12-1/4 SDS Drill Bit

The Makita D-00935 3/8 x 12-1/4 SDS Drill Bit.

Makita D-00832 3/16 x 6-1/4 SDS Drill Bit

The Makita D-00832 3/16 x 6-1/4 SDS Drill Bit.

Makita D-00979 1/2 x 12-1/4 SDS Drill Bit

The Makita is D-00979 1/2 x 12-1/4 SDS Drill Bit.

DeWalt DW1232 1/2Inch Reduced Shank Cobalt Split Point Drill Bit

The DeWalt DW1232 is a 1/2 Reduced Shank Cobalt Split Point Drill Bit. It has 3/8 reduced shank. Cobalt drill bit is designed to drill through the toughest metal drilling applications. The bit is ideal for drilling in stainless steel, abrasive metal and hard-to-drill alloys.

Makita 711144-A-25 3/16-Inch x 8-Inch SDS Drill Bits 25 Pack

The Makita 711144-A-25 is a pack of 25 3/16-Inch x 8-Inch SDS Drill Bits.

Kreg KJD 3/8-Inch Step Drill Bit

The Kreg KJD is a 3/8-Inch High speed steel step drill bit for Mini, Rocket, K2 and K2000 Kreg Jigs. The one-piece design eliminates clogging and provides a much smoother and faster drilling stroke than the drill bits with replaceable center drills. The tip of this bit is 1/2-Inch in length.

Denver Tools 650 3/8-Inch Keyless Air Drill

The Denver Tools 650 is a 3/8-Inch Keyless Air Drill with an easily accessible forward/reverse switch making it easy to use with one hand.

Flex BD05 Stationary Drill Stand for Core Rigs

The Flex BD05 is a Stationary Drill Stand for Core Rigs. It is a slimline drill stand with triple suction lateral support. The long-footed base plate allows it to be used even in the narrowest environments. By rotating the feed column it is also possible to drill in corners and recesses, for example, the steps of stairways, kitchen countertop slabs, parapets and gravestones. It is stable, even for horizontal drilling on all smooth and polished surfaces.

DeWalt DW2735P 12-Pc Drill and Drive Set

The DeWalt DW2735P is a 12-Pc Drill and Drive Set. DeWalts new Drill and Drive accessory system is the fastest way to drill holes and drive screws in wood. The quick-change mechanism is designed for easy one step loading, with an easy push forward one-handed release and the shank has been beefed up to 5/16 of an inch for added durability.

Milwaukee 0300-20 1/2-Inch Variable Speed Drill

Powerful 8.0 amp motor. Variable speed 0-850 RPM. This drill has the construction and performance to eliminate any other 1/2 drill in its category Heavy-duty keyed chuck 8 ft. 3-wire rubber cord 360 locking side handle Ergonomic tactile grip and two finger trigger for user comfort and balance Includes Drill, 360 side handle, chuck key, and flexible key holder

Milwaukee 48-89-9050 2 Piece Step Drill Bit Set

Milwaukee 48-89-9050 is a 2 Piece Step Drill Bit Set. This is a set of two step drill bits 48-89-9100 and 48-89-9110. These step drill bits are made from a high alloy, premium industrial grade steel. Step drill bits allow user to quickly and easily drill a variety of round holes in steel, brass, copper, aluminum, wood, Plexiglas and plastic. The balanced double flute design provides two cutting edges for easier, faster cutting in soft or hard materials.

Grip 35357 21-Piece Cobalt Drill Bit Set

Professional quality Use for drilling in tough, high tensile strength materials Lasts up to 12 times longer than standard bits! Includes Drill bits 1/16 to 3/8 by 1/64 in handy storage box

Chicago Pneumatic CP887 3/8Inch Straight In-Line Drill

-3/8 Straight In-Line Drill-Jacobs Chuck 3/8 capacity-Built-in regulator-Lock off throttle to prevent accidental start up-Perfect for drilling in hard to reach areas

DeWalt DW1622 5/8-Inch Reduced Shank Black Oxide Drill Bit

The DeWalt DW1622 is a 5/8-Inch Reduced Shank Black Oxide Drill Bit. The bit is ideal for drilling holes larger than 3/8-Inch with a standard 3/8-Inch drill. The 12-Inch reduced shank black oxide drill bit is ideal for drilling in hard to reach areas, in materials such as non-ferrous metal, wood and plastic.

Grip 35315 17-Pc Cobalt Silver & Deming Drill Bit Set

The Grip 35315 is a 17-Pc Cobalt Silver & Deming Drill Bit Set. The extra large & stubby bits set is for use in drilling into wood, metal and more. It includes heat treated, high speed steel bits with cobalt coating which can be used in any 1/2 chuck electric drill or drill press.

DeWalt DW1620 9/16-Inch Reduced Shank Black Oxide Drill Bit

The DeWalt DW1620 is a 9/16-Inch Reduced Shank Black Oxide Drill Bit. The bit is ideal for drilling holes larger than 3/8-Inch with a standard 3/8-Inch drill. The 12-Inch reduced shank black oxide drill bit is ideal for drilling in hard to reach areas, in materials such as non-ferrous metal, wood and plastic.

New DeWalt DC987KA 18 Volt XRP Drill Kit

The DeWalt DC987KA is an 18 Volt XRP Drill Kit. This 18-volt cordless drill/driver kit deliver high speed and great performance. The 3-speed transmission produces more RPMs for faster drilling in wood and metal. Plus, the high 500-In./Lbs. torque motor allows you to drill larger holes and drive bigger screws.

DeWalt DW1224 3/8Inch Cobalt Split Point Drill Bit

The DeWalt DW1224 is a 3/8 Cobalt Split Point Drill Bit. The 135 split point drills on contact and prevents walking. It is ideal for drilling in stainless steel, abrasive metal and other hard to drill alloys.

DeWalt DW1205 5/64Inch Cobalt Split Point Drill Bit

The DeWalt DW1205 is a 5/64" Cobalt Split Point Drill Bit. The 135 split point drills on contact and prevents walking. It is ideal for drilling in stainless steel, abrasive metal and other hard to drill alloys.

DeWalt DW1214 7/32Inch Cobalt Split Point Drill Bit

The DeWalt DW1214 is a 7/32 Cobalt Split Point Drill Bit. The 135 split point drills on contact and prevents walking. It is ideal for drilling in stainless steel, abrasive metal and other hard to drill alloys.

can I do?

Couldn't find Drill Accessorieshere? Are you looking for something else? Search our partner sites: