DeWalt Tools tools and information

Find DeWalt Tools at best prices and buy!

DeWalt Case 1-Tool Carrying Case

The DeWalt Case is a 1-Tool Carrying Case. The DeWalt carrying case holds 1 Dewalt tool. Tools are not included.

DeWalt DW9099 18V Battery, 2.2 Amps

The DeWalt DW9099 is an 18V Battery. It used to powers entire DeWalt line of 18V tools allowing users to run multiple tools off of the same battery pack.

DeWalt BAG6PC Empty Tool Bag for 18 Volt Tools

The DeWalt BAG6PC is an Empty Tool Bag for 18V Tools. The empty tool bag from DC6KITA 6-tool cordless combo kit easily holds 6 power tools plus accessories. It has heavy-duty ballistic nylon for long life. It features reinforced bottom and side panels. Double stitching and steel rivets for maximum durability Heavy-Duty handles allow heavy loads.

DeWalt BAG2PC Empty 2-Bag Tool

The DeWalt BAG2PC is an Empty 2-Bag Tool. The empty tool bag is for cordless tools. It easily holds 2 power tools plus accessories. It has heavy-duty ballistic nylon for long life. The bag features reinforced bottom and side panels, double stitching and steel rivets for maximum durability and heavy-duty handles for allowing heavy loads.

DeWalt DW9057 Heavy-Duty 7.2V Compact NiCd Battery Pack

The DeWalt DW9057 is a Heavy-duty 7.2V Compact NiCd Battery Pack. The 7.2V compact battery is 10% lighter than standard batteries and 15% smaller than standard batteries. It powers the DeWalt line of 7.2V tools allowing users to run multiple tools off of the same battery pack.

DeWalt DC9071 12V XRP Battery Pack

The DeWalt DC9071 is a 12-Volt XRP battery pack compatible with most 12 Volt power tools, except the Univolt tools. The battery can also work with some of the 14.2 Volt XRP power tools, and has 40% more run time than standard batteries. These 12 Volt NiCd batteries charge in much lesser time than alkaline batteries, and increase your productivity with uninterrupted workflow. One of the first serviceable batteries offered by DeWalt, the DC9071 is designed to give power pack performance for lighter tools. This battery is better constructed with a rugged plastic case, and weighs approximately 1.6 pounds. The advanced DeWalt DC9071 12 Volt XRP batteries are screwed instead of glued, which makes it easy to refurbish them at the end of their life.

DeWalt DC9091 14.4V XRP Battery Pack

The DeWalt DC9091 is a 14.4 V NiCd XRP battery pack that is compatible with any 14.4-v power tools and chargers except the Univolt tools. An abbreviation for eXtended Run-time Performance, the XRP battery is an upgraded version of the XR batteries and gives 40% more run-time than its predecessor. With an impressive run time between the charges, you will spend less time in charging or swapping the batteries. The DeWalt DC9091 fully meets the expectations of heavy-duty power tools such as the cordless circular saw and hammer drill. The NiCd XRP battery can be quickly recharged ? much faster than any alkaline batteries. It has a rugged plastic casing, which adds to the endurance of the battery and protects it from external damages. The DeWalt DC9091 rechargeable NiCd XRP battery is lightweight and is designed to allow the battery to be easily released.

DeWalt D5126 Ballistic Nylon Tele Communications Pouch

The DeWalt D5126 is a Ballistic Nylon Tele Communications Pouch. The pouch has large main pocket with 2 Compartments for organization, 2 interior hand tool loops, 3 heat formed pockets for hand tools. It also has the electrical tape holder.

DeWalt DC9099 18-Volt Ni-Cd Low-Profile Battery Without Manufacturer Packaging

The DeWalt DC9099 is a low-profile 18-volt battery that is compatible with all DeWalt 18-volt cordless tools. The DC9099 is 0.5 lbs. lighter than the DW9099 batteries and 3/8" thinner.

DeWalt DC9096 18V XRP Extended Run-Time Battery Pack

BUY A DC9096 TWO PACK for 119.99 AND SAVE 60!The DeWalt DC9096 is a 18V XRP Extended Run-Time Battery Pack. The DeWalt only uses top quality cells for their cordless batteries. The DC9096 XR+ Pack Extended Run Time batteries deliver 40% more run time than XR PACK batteries. They are high capacity 2.4 Amp-Hour with new cobalt technology which produces extended run time. The Ni-Cd cells used by DeWalt offer consistent performance in a wide variety of climates and applications. It is for use with all DeWalt 18V cordless tools.

DeWalt DC500 2 Gallon Cordless/Corded Wet/Dry Vacuum

The DeWalt DC500 is a Light, portable, versatile and powerful Vacuum. It is powered by a 12-18V battery, allowing for use when the powers off. The five hose is flexible and the cleaning tools fit on board. The suction is impressive, whether on AC or DC power.

DeWalt DW9061 9.6V XRP Extended Run-Time Battery

High capacity XRP battery has 25% more run-time than compact batteries Powers entire DEWALT line of 9.6V tools except Univolt tools allowing users to run multiple tools off of the same battery pack 9.6V NiCd Battery

DeWalt DC9096-2 18V XRP XRP Extended Run-Time Batteries - 2 Pack

The DeWalt DC9096-2 is a 2-pack of 18V XRP Extended Run-Time Batteries. DeWalt only uses top quality cells for their cordless batteries. The DC9096 XRP Extended Run-Time Batteries deliver 40% more run time than the standard batteries. They are high capacity 2.4 Amp-Hour batteries with new cobalt technology which produces extended run time. The Ni-Cd cells used by DeWalt offer consistent performance in a wide variety of climates and applications. It is for use with all DeWalt 18V cordless tools.

DeWalt D5130 Ballistic Nylon Tape Measure Holder

The DeWalt D5130 is a Ballistic Nylon Tape Measure Holder. the holder is designed with features that make getting tools in and out easy. The holder is made from heavy-duty ballistic nylon so its lightweight, abrasion resistant and moisture resistant. Solid steel rivets, double stitching and reinforced belt tunnel makes it one of the toughest tape measure holders available. It holds up to 35 ft. tape.

DeWalt D5136 Ballistic Nylon Trim Carpenter's Pouch

The DeWalt D5136 is a Ballistic Nylon Trim Carpenters Pouch. The tool pouch is designed with features that make getting tools in and out easy. It is made from heavy-duty ballistic nylon so its lightweight, abrasion resistant and moisture resistant. Solid steel rivets, double stitching and reinforced belt tunnel make this one of the toughest trim carpenters pouches available. It includes two large pockets, four additional pockets for dedicated tool storage and a lightweight hammer holder.

DeWalt DC9280 28V Battery Pack with NANO? Technology

NANO Technology is a proprietary technology from DEWALT that combines longer life, lighter weight, greater performance, and an expanded system of tools. Delivering 2,000 recharges, DEWALTs NANO-Phosphate Lithium Ion cells deliver industry leading durability and cycle life. Two to three times more than any other formula of lithium ion tested. The 28V system with NANO Technology provides a new line of cordless tools to help professional contractors complete a wide-range of heavy-duty jobsite applications. It is the ultimate power-to-weight performer. 28V delivers longer run-time and faster application speeds compared to current 18V, yet weighs less. The DC9280 weighs the same as a 14.4 Volt NiCd battery and delivers up to 50% more runtime than 18V. The NANO-Phosphate Lithium Ion cells deliver 2,000 recharges which is two to three times more than any other formula of lithium ion tested. The DC9280 is for use with all DEWALT 28V tools.

DeWalt DC310BK 6-1/2 Inch 28-Volt Cordless Circular Saw with NANO Technology - Tool Only, With Case

The DeWalt DC310BK is a 6-1/2 Inch 28-Volt Cordless Circular Saw. With the power of 28 Volts the DC310BK is light enough for all day use and has enough power to handle any work site job. With the standard features expected from DeWalt® the 28-Volt line of tools will soon be a leader in the field. Battery and Charger are NOT Included.

DeWalt DC310B 6-1/2 Inch 28-Volt Cordless Circular Saw with NANO Technology - Tool Only

The DeWalt DC310B is a 6-1/2 Inch 28-Volt Cordless Circular Saw. With the power of 28 Volts the DC310BK is light enough for all day use and has enough power to handle any work site job. With the standard features expected from DeWalt® the 28-Volt line of tools will soon be a leader in the field. Battery and Charger are NOT Included.

DeWalt DW840K 7-Inch Medium Angle Grinder Kit

The DeWalt DW840K is a Medium Angle Grinder containing a 13.0 Amp AC/DC, 8,000 rpm motor which provides high power and speed for 7" grinding applications. The high power-to-weight ratio provides greater efficiency and reduced user fatigue while the keyless adjustable guard can be adjusted without the use of tools. The DW840K also has a rear handle design for greater comfort and control, external brush doors for easy servicing, a sealed ball and roller bearing for extended motor life, and a spindle lock for quick and easy wheel changes, making this grinder very easy, and comfortable to use.

DeWalt D5128 Ballistic Nylon Pliers / Tin Snip Pouch

The DeWalt D5128 is a Ballistic Nylon Pliers / Tin Snip Pouch. The tool pouch is designed with features that make getting tools in and out easy. It is made from heavy-duty ballistic nylon so its lightweight, abrasion resistant and moisture resistant. Solid steel rivets, double stitching and reinforced belt tunnel makes it one of the toughest pliers / tin snip pouches available. The single tool storage makes this perfect for retention of a variety of pliers or miscellaneous tools.

DeWalt D6050 17 inch Ballistic Nylon Tool Bag

The DeWalt D6050 is a rugged 17 tool bag made from ballistic nylon, which makes it lightweight. Apart from the ballistic nylon construction that is moisture and abrasion resistant, this tool bag also has reinforced bottom and side panels to protect its contents. Double stitched high stress areas and reinforced solid steel rivets ensure a longer life for the tool bag. The DeWalt D6050 also has protective rails with heavy-duty handles for additional durability. The flat top allows you to stack other bags or accessories and thus, save space. The tool bag is large enough to store a couple of power tools or combo kits, along with wrenches, extension cord, and other accessories that can easily fit into the outer and inner compartments. Moreover, the compact size (8.5x17x11) and the well-organized pockets (11 large pockets) of the DeWalt 6050 make it easy to just pick up the tool bag and head out to jobsites with all your essential tools.

DeWalt DC9180 Heavy-Duty 18V Battery Pack with NANO Technology

The DeWalt DC9180 is a 18V Battery Pack with NANO Technology. It is backwards compatible with the DeWaltT 18V system of 40+ tools. The NANO -Phosphate Lithium Ion cells deliver 2000 recharges which is two to three times more than any other formula of lithium ion tested. The battery pack weighs 1.5 lbs, the same as a 12V NiCd battery. The DC9180 has no memory and virtually no self-discharge for maximum productivity and less downtime.

DeWalt D28494SR Factory Reconditioned D28494S 7-Inch Heavy-Duty Angle Grinder

The DeWalt D28494S is a Factory Reconditioned 7 inch Heavy-Duty Angle Grinder. A high power 4 HP, 6000 RPM motor with overload protection provides higher operating speeds under load. It has an epoxy coated field and armature which provide long service life against abrasion from airborne debris. The grinder has a keyless adjustable guard, it allows for guard adjustments to be made without any tools. A low profile gear case allows for work in tight areas.

DeWalt DW920K-2 7.2V Cordless Screwdriver Kit, 0-500 RPM******

The DeWalt DW920K-2 is a 7.2V Cordless Screwdriver Kit. A two-position handle allows adjusting the tools configuration as needed to work in confined areas. The 7.2V motor which turns at 0-500 RPM and delivers 80 in-lbs of torque helps to finish the job easier and faster. The clutch setting can be adjusted to 16 different positions which help to eliminate the problem of stripping out of screws. Also, changing the bit is simple with an industrial quick-release keyless chuck.

DeWalt D5118 Ballistic Nylon Electrical Test Kit Pouch

The DeWalt D5118 is a Ballistic Nylon Electrical Test Kit Pouch. The pouch is designed with features that make getting tools in and out easy. The pouch is made from heavy-duty ballistic nylon so its lightweight, abrasion resistant and moisture resistant. Solid steel rivets, double stitching and reinforced belt tunnel make this one of the toughest electrical test kit pouches available. The single pocket snugly fits the test kit while the nylon webbing and buckle keeps it firmly in place.

DeWalt D180001 9-Piece Plumber's Hole Saw Kit

DeWalt D180001 is ideal for wood and metal cutting, especially for plumbers. This complete 9-piece hole saw kit contains 3/4, 7/8, 1-1/8, 1-1/2, 1-3/4, and 2-1/4 inches hole saws. Besides, the kit also includes small and large quick-change mandrel. With all these components this hole saw kit enhance the productivity of any professionals. Along with the other components, the D180001 has replacement parts, including two additional Pilot Point(R) centering bits to increase the user value. The tools feature three trade specific configurations that encompass the most commonly used sizes. This enables a user carry only this kit to use during job requirements. The C-clamp design of the door lock allows tool free clamping without creating any surface damage. Besides, it can drill accurately at any height due to the alignment window and taller bushings. More over, the door lock kit has two completely adjustable bushing that can be used in the both standard backsets and both common door thickness. The compact injection molded hole saw kit makes it durable apart from adding portability to the entire collection.

DeWalt DC910B Cordless 1/2-Inch 28-Volt Hammerdrill/Drill/Driver With NANO Technology - Tool Only

The DeWalt DC910B is a Cordless 1/2-Inch 28-Volt Hammerdrill/Drill/Driver With NANO Technology. With the power of 28 Volts the DC310BK is light enough for all day use and has enough power to handle any work site job. With the standard features expected from DeWalt® the 28-Volt line of tools will soon be a leader in the field. Battery and Charger are NOT Included.

DeWalt DC9180C Heavy-Duty 1 Hour Charger and 18V Battery Pack with NANO Technology

Exclusively featuring Dewalts proprietary NANO Technology, the DeWalt DC9180C 18V Battery Pack is compatible with the DeWalt 18V system of 40+ tools. The NANO-Phosphate Lithium Ion cells deliver 2000 recharges and are renowned for their long battery life. The battery pack has no memory and virtually no self-discharge, leading to maximum productivity and less downtime. The DC9310 charges all DeWalt 7.2V - 18V NiCd, NiMH or Li-Ion batteries in about an hour, with Univolt as an exception. This helps the user to make optimum use of a single charger for multiple cordless products. The DeWalt DC9180C Battery Pack also features the patented 3-stage charging system, to maximize performance and also extend the overall life of the battery. The DC9180 18V battery pack comes with DC9310 one-hour charger.

DeWalt D26670R Factory Reconditioned D26670 5.6 Amp Laminate Trim Router

The Dewalt D26670 is a Factory Reconditioned Heavy-Duty Laminate Trim Router. The laminate trim router allow the user to adjust the base vertically, horizontally, as well as base changes without the need for tools. The D26670 features a 1/4 inch collet to allow for roundover bits, laminate bits and a variety of decorative detail bits. At 5.6 Amps and 30000 RPM it delivers the power and torque for hardwoods and all small router applications. The fixed base accepts standard template guides for ease of use in cutting mini dovetails, hinge butt and strike and latch templates.

DeWalt DW756R Factory Reconditioned DW756 Heavy-duty 6-Inch Bench Grinder

The DeWalt DW756 is a Factory Reconditioned Heavy-duty 6 Bench Grinder. The bench grinder performs all grinding operations including sharpening tools, deburring, rust removal, shaping parts and cleaning objects. The bench grinder is powered by a 4 Amps all-ball-bearing enclosed induction motor that produces 5/8 HP. It features a rugged cast-iron base and motor housing to provide durability and prolong life. The motor runs at 3450 RPM for high-speed material removal. The spindle Diameter is 1/2. The bench grinder comes complete with eye shields, spark deflectors, tool rests, 36 and 60 grit wheels and an adjusting wrench.

DeWalt D28474WR Factory Reconditioned D28474W 7-Inch Large Angle Grinder, 8000 RPM, 15.0 Amps

The DeWalt D28474W factory reconditioned large angle grinder has the right combination of power, torque and speed. Powered by a new breed of 4 HP motors, the 15 Amp AC/DC DeWalt grinder runs cool and efficiently to provide maximum power, even under heavy loading. Combined with high power, the helical cut-steel gears provide high torque for faster in-use operating speeds. The tool is protected from abrasion through the use of labyrinth protected and sealed bearings and electrostatic coated motor windings. The keyless adjustable guard allows users to make guard adjustments without looking for tools.

DeWalt DWS5020 46-Inch Tracksaw Track

The DeWalt DWS5020 is a 46-Inch Tracksaw Track for use with the DeWalt DWS520SK Track Saw.

DeWalt DC9PAKIA 18V 9-Tool Cordless Combo Kit

Powered by 18 Volts battery the DeWalt DC6PAKRA comprises DC925 XRP 1/2" hammerdrill/drill/driver, DC390 XRP circular saw, DC385 XRP reciprocating saw, DW059 ½ inch high-torque impact wrench, DW056 1/2" impact driver, DC330 XRP variable speed jig saw, DC410 cut-off tool, and DC550 18V cut-out tool. As the Category Winner (Best In Test) of the Tools Of The Trade 07, the DC925 XRP 18V cordless hammer drill boasts its 510 units watt out based performance. With three different variable speed ranges (0 to 450, 0 to 1,500, and 0 to 2,000 RPM), the heavy duty DC925 XRP proves its versatility besides meeting the production speed of any professional. Weighing 6.1 lbs and featuring a compact size the power drill easily fits even into the tightest jobsite condition without being strenuous on the users arm.The DC390 XRP circular saw sports a 6 ½ inch carbide tipped blade. This helps the saw to cut at 2x speed when used at 90 or 45-degree angles. The 3700-RPM ensures faster cuts at no additional manual effort. Besides, its 0 to 50 degree bevel capacity adds to its application versatility. Most importantly, this circular saw features a fan-cooled motor that prevents the motor from getting over heated and eventually boosts the durability and longevity of this tool.The 1 1/8 inch stroke length backed by a cutting speed ranging from 0 to 3,000 SPM, makes the DC385 XRP reciprocating saw a fast cutter in its class. For different types of flush cutting the power saw features the 4-position blade clamp. This makes the saw versatile and increases the production speed. With anti slip comfort grip this reciprocating saw offers both comforts and control.The DW059 1/2 inch high torque impact wrench delivers a maximum torque of 300 ft-lbs, this enables the heavy duty wrench to perform a host of fastening applications. The magnesium gear case and all metal transmission enhance the durability of this tool. For added security this impact wrench features heavy duty impacting mechanism that directs the torque towards the fastener and prevents any kick back.In a short stature the look of DW056 18V impact driver may deceive any user who is in search of a power driver. However, once one get accustomed with its 1,170 in-lbs maximum torque its become nearly difficult to think of any other driver. With a speed range of 0 to 2,4000 RPM this driver drives almost any thing, fast and stable, without demanding additional pressure from the user.With all metal lever action, the DC330 XRP variable speed jigsaw enables fast blade change. The key less shoe bevel detents at 0, 15, 30, and 45 degrees to provide convenient bevel cutting at minimal effort. This versatile jig saw offers variable speed ranging from 0 to 30,000 SPM and can be used on multitude of materials in different applications.The 7 lbs weighing DC410 18V cut-off tool is easy to port and use without being much strenuous on the users arm. This power tool cuts at 6,500 RPM and saves a lot of production time. Besides, the spindle l

DeWalt DC612KAR Factory Reconditioned DC612KA XRP 12V/14.4V 16 Gauge Straight Finish Nailer Kit

The DeWalt DC612KA Factory Reconditioned Cordless Finish Nailer powered by DeWalt XRP battery system cycles fast and drives nails in fully without leaving a surface blemish. The XRP batteries are designed to perform 40% more than standard batteries, and provide extended run-time and also ensure a long work life. DeWalt offers the finish nailer in both straight and 20 angled magazine configurations, which accept most brands of 16 gauge straight nails and ensures consistent nail penetration into both soft and hard joints. Portable and versatile, the is ideal for nailing, installing molding, chair rails, cabinetry and other fine finish applications. The finish Nailers top cap is impact resistant and is easily removable for troubleshooting.. The headlights help while working in dimly lit conditions. The numbered, 6-position dial helps in easy referencing of depth levels. The DeWalt DC612KA Finish Nailers nosepiece is designed to for the removal of jammed nailers, without the need to use tools.

DeWalt DW920K-2R Factory Reconditioned DW920K-2 1/4 inch 7.2V Cordless Screwdriver Kit, 0-500 RPM

The DeWalt DW920K-2 is a Factory Reconditioned 1/4 inch 7.2V Cordless Screwdriver Kit. A two-position handle allows to adjust the tools configuration as needed to work in confined areas. The 7.2V motor which turns at 0-500 RPM and delivers 80 in-lbs of torque helps to finish the job easier and faster. The clutch setting can be adjusted to 16 different positions which help to eliminate the problem of stripping out of screws. Also, changing the bit is simple with an industrial quick-release keyless chuck.

DeWalt DW758 Heavy-Duty 8Inch Bench Grinder, 3600 RPM, 4.2 Amps

The DeWalt DW758 bench grinder performs all grinding operations including sharpening tools, deburring, rust removal, shaping parts and cleaning objects. The bench grinder is powered by a 4.2 Amp all-ball-bearing enclosed induction motor. The bench grinder comes complete with eye shields, spark deflectors, tool rests, 6 medium wire brush and 6 medium grinding wheel.

DeWalt D5100LG Heavy-Duty Large/X-Large Ballistic Nylon Tool Belt Set

The DeWalt D5100LG is a Ballistic Nylon Tool Belt Set designed by professionals and contractors based on their rich experience. It includes a tool pouch with 12 pockets, a nail pouch with 8 pockets, a separate hammer holder, and 3 padded work belt. The tool belt set is made from ballistic nylon, which is light in weight and 2 times more abrasion and moisture resistant than woven materials. The toughness is further guaranteed with top-grained leather that is oil-tanned, thick, durable, and yet flexible for comfort. The reinforced solid steel rivets in DeWalt D5100LG can withstand up to 200 pounds of force and still not pull through or pop off. The double-stitched high stress areas add to the sturdiness of this tool belt. The heat-formed pockets in De Walt D5100LG will not collapse even when they are open, and the chances of the contents falling out are minimized. This tool belt with reinforced tunnels can be easily adjusted to snug-fit waist sizes ranging from 36 to 48. This DeWalt tool belt is lightweight (5.2 lbs), comfortable to wear and the extra-large pockets help you keep a lot of tools handy within reach.

DeWalt D28770K Heavy-Duty 4-3/4? Deep Cut Variable Speed Band Saw Kit, 82-280 SFPM, 6.0 Amps

DeWalt D28770K is a lightweight smart design portable band saw kit. The motor is placed on top of the blades that help in impeccable balance and comfort while use. The speed control knob of this power tool helps set optimum speed for specific applications. With its variable cutting speed ranging from 82 to 280 feet per minute, the D28770K proves its versatility. Among the different types of application some worth mentioning are cutting aluminum, angle iron, galvanized pipe, mild and tougher steel that includes stainless, chrome and tungsten. Whether round or rectangular, what ever is the shape of stock this band saw can cut which is as deep as 4-3/4. This saw kit can withstand the toughest jobsite application ? thanks to its powerful 6.0 Amp motor. The DeWalt D28770K also features a sight light, which adds to the convenience of seeing accurate cut line in low lit or dark job site. The integrated hang hook of DeWalt D28770K protects the front handle and the casting from any sort of damaging while not in use. The rubber bumpers protect the tool from job site abuse and add to the longevity of this tool. While the wide front handle allows for more hand space, the soft grip back handle ensures comfort during usage thus proving this power tools ergonomic design.

DeWalt DW317KR Factory Reconditioned DW317K Heavy-Duty Variable Speed Compact Jig Saw Kit

The DeWalt DW317K factory reconditioned jig saw is a user-friendly, quick and compact jig saw. It features a beefy 5-1/2 Amp motor for fast cuts through hard materials. From thin-gauge metals to plastics to hardwoods, The cutting machine gets the job done in a short time. An intuitive, keyless blade change means less downtime and more productivity. Four-position orbital action and variable speeds from 0 to 3100 strokes per minute make it easy to adjust the tools speed and performance to a wide variety of sawing tasks. An all-metal gear housing stands up to abuse on the toughest jobsites.

DeWalt DW160VR Factory Reconditioned DW160V 3/8-Inch Variable Speed 3.7 Amp Reversible Right Angle Drill

DeWalt DW160V is a factory reconditioned heavy-duty 3/8 variable speed reversible right angle drill has a 3.7 Amp right-angle drill. The drill has been specially designed for electricians, plumbers, remodelers and anyone who works in tight places. The drill offers good speed (1200 RPM) and weighs 3-3/4 lbs. It features paddle-type trigger, which runs nearly the length of the tools body, allowing the user to engage the drill using all manner of inventive hand configurations. The molded neck makes the drill comfortable to grasp by the head.

DeWalt D26670K Heavy-Duty Laminate Trim Router Kit With 3 Bases, 5.6 Amps, 30000 RPM

The DeWalt D26670K is a Heavy-Duty Laminate Trim Router Kit With 3 Bases. The laminate trim router kit allows the user to adjust the base vertically, horizontally, as well as base changes without the need for tools. The tool features a 1/4 collet to allow for round over bits, laminate bits and a variety of decorative detail bits. At 5.6 Amps and 30000 RPM the tools delivers the power and torque for hardwoods and all small router applications. The fixed base accepts standard template guides for ease of use in cutting mini dovetails, hinge butt and strike and latch templates. The tool offers a tilt base, standard base with ball-bearing guides and offset base for nearly any and all laminate trimming applications.

DeWalt D25113KR Factory Reconditioned D25113K 1-Inch SDS Pistol Grip 3 Mode Hammer

The DeWalt D25113K is a Factory Reconditioned Heavy-Duty 1 inch SDS Pistol Grip 3 Mode Hammer. It features 2.5 ft-lbs of impact energy that provides for fast drilling and powerful chipping. The unit has an 8.0 Amp motor that provides high performance and overload protection. The rotary hammer has a capacity to cover a broad range of mechanical and epoxy anchoring applications. The optimal range for the hammer in concrete is 5/32 inch - 5/8 inch. The reverse feature assists in the removal of fasteners. The tools variable speed is used for precise hole placement on work surface. The tool comes with a factory set clutch which reduces sudden, high torque reactions if the bit jams. The 360 side handle adjusts easily for preference or use in tight spaces.

DeWalt D25213KR Factory Reconditioned D25213KR 1-Inch SDS D-Handle 3 Mode Hammer

The DeWalt D25213K Factory Reconditioned Heavy-Duty 1-Inch SDS D-Handle 3 Mode Hammer features 2.5 ft-lbs of impact energy that provides for fast drilling and powerful chipping. The unit has an 8.0 Amp motor that provides high performance and overload protection. This rotary hammer has a capacity to cover a broad range of mechanical and epoxy anchoring applications. The optimal range for this hammer in concrete is 5/32-Inch to 5/8-Inch. The reverse feature assists in the removal of fasteners. Use the tools variable speed for precise hole placement on work surface. The tool comes with a factory set clutch which reduces sudden, high torque reactions if the bit jams. The 360 degree side handle adjusts easily for preference or use in tight spaces.

DeWalt DW073KDR Factory Reconditioned DW073KD 18-Volt Cordless Rotary Laser - Combo Kit (Interior/Exterior)

The DeWalt DW073KD is a factory reconditioned power tool. It is designed for accuracy, durability, versatility, visibility, for interior and exterior applications on both residential and commercial sites. For professionals, it is ideal for ceiling and wall installers, concrete workers, masons, remodelers and deck builders. The DW073KDR is a manually leveled rotary laser that has dual side-by-side laser diodes for an extremely bright beam and is accurate to 1/4 inch at a radius of 100 (1/8 inch at 50) with a visible diameter of 200. A long-range leveling up to 600 is possible with the digital laser detector. Laser setup is quick and easy with the tools built-in three-in-one floor mount, adjustable rack-and-pinion wall mount and 5/8-11 inch threaded tripod insert.

DeWalt D25213K 1 Inch D-Handle Three Mode SDS Hammer Drill

The DeWalt D25213K Heavy-Duty 1 Inch SDS D-Handle 3 Mode Hammer features 2.5 ft-lbs of impact energy that provides for fast drilling and powerful chipping. The unit has an 8.0 Amp motor that provides high performance and overload protection. This rotary hammer has a capacity to cover a broad range of mechanical and epoxy anchoring applications. The optimal range for this hammer in concrete is 5/32-5/8. The reverse feature assists in the removal of fasteners. Use the tools variable speed for precise hole placement on work surface. The tool comes with a factory set clutch which reduces sudden, high torque reactions if the bit jams. The 360 degree side handle adjusts easily for preference or use in tight spaces.

DeWalt DW073KD Heavy-Duty 18V Cordless Rotary Laser - Combo Kit (Interior/Exterior)

The DeWalt DW073KD Heavy-Duty 18V Cordless Rotary Laser - Combo Kit provides accuracy, durability, versatility and visibility. It is designed for interior and exterior applications on both residential and commercial sites. For professionals, it is ideal for ceiling and wall installers, concrete workers, masons, remodelers and deck builders. The DW073KD is a manually leveled rotary laser that has dual side-by-side laser diodes for an extremely bright beam and is accurate to 1/4 at a radius of 100 (1/8 inch at 50) with a visible diameter of 200. Long-range leveling to 600 is possible with the digital laser detector. Laser setup is quick and easy with the tools built-in three-in-one floor mount, adjustable rack-and-pinion wall mount and 5/8-11 inch threaded tripod insert.

DeWalt DW7053 Dust Bag for All (DeWalt) Miter Saws

The DeWalt DW7053 is a Dust Bag for All (DeWalt) Miter Saws. It is used for models for DW703, DW705, DW706 and DW708 miter saws. It captures dust for a cleaner shop.

DeWalt D55152R Factory Reconditioned D55152 Heavy-Duty 1.1 HP Continuous 4 Gallon Electric Hand Carry Compressor with Control Panel

The DeWalt D55152 is a Factory Reconditioned Heavy-Duty Electric Hand Carry Compressor. The compressor is ready for the job site with the professional contractor. The oil-lubricated pump with cast iron cylinder gives cu-ft. per minute at 90 PSI, enough to run multiple tools off the dual universal couplers. The panel is protected between the two tanks. It features large, easy-to-read gauges for tank pressure and regulated pressure, as well as the regulator and the two quick couplers. It has ball-type tank drain design and roll bars that surround and protect the 2.7 HP motor. The handle offers a well-balanced haul and its light enough for easy portability at 65 lbs.

DeWalt D55152 Heavy-Duty 1.1 HP Continuous 4 Gallon Electric Hand Carry Compressor with Control Panel, 3400 RPM

The DeWalt D55152 is a Heavy-Duty Electric Hand Carry Compressor. The compressor is ready for the job site with the professional contractor. The oil-lubricated pump with cast iron cylinder gives cu-ft. per minute at 90 PSI, enough to run multiple tools off the dual universal couplers. The panel is protected between the two tanks. It features large, easy-to-read gauges for tank pressure and regulated pressure, as well as the regulator and the two quick couplers. It has ball-type tank drain design and roll bars that surround and protect the 2.7 HP motor. The handle offers a well-balanced haul and its light enough for easy portability at 65 lbs.

DeWalt DC2PAKCAR Factory Reconditioned DC2PAKCA XRP 18-Volt Cordless Hammerdrill / Reciprocating Saw Combo Kit

The DeWalt DC2PAKCA Factory Reconditioned Combo Kit offers you the convenience of speed and power in two tools - a hammerdrill and a reciprocating saw. The hammerdrill is easy to handle and is beautifully balanced. The 1/2 chuck grabs the bit powerfully and centers it quickly, locking it into place with the ratcheting system. Vibration is down to a minimum in the hammerdrill even at maximum RPM, so its not difficult to control.The reciprocating saw has a keyless blade clamp system that makes for easy blade changes. Its also extremely powerful, with up to 3,000 strokes per minute. The stroke length is 1-1/8, so you can get aggressive cutting and more even blade wear. You can set the blade in four positions to help you reach whatever youre cutting and the depth adjustment is as easy as pushing a button and adjusting the show. You get great control from this tool with the comfort grip that reduces vibration. The two tools together make the DC2PAKCA Factory Reconditioned Combo Kit a great value.

DeWalt 18V Cordless hammerdrill/driver

Couldn't find DeWalt Toolshere? Are you looking for something else? Search our partner sites: