DeWalt Cordless Laser Levels                      

DeWalt Cordless Laser Levels tools and information

Find DeWalt Cordless Laser Levels at best prices and buy!

DeWalt DW077KI 18V Cordless Self-Leveling Rotary Laser Kit - Interior

For precision leveling, the DeWalt DW077KDT 18-volt self-leveling rotary laser kit provides accuracy up to 1/8 inch with a sharp, high-power beam visible up to 100 feet or further when in chalk-line mode. Its four-speed laser rotary head allows selecting laser beams of varying strength. Lower speeds produce a brighter beam and higher speeds produce a more solid laser beam for projecting to longer distances. The bundled wall mount, tripod and floor mount set simplify installation. Its protected rotary head and weatherproof design provide durability for indoor and outdoor locations. Additionally, the red-tinted laser-enhancement glasses also enhance visibility of the laser beam under bright-light conditions or over long distances.The DeWalt DW077KDT rotary laser kit electronically levels itself in both level and plumb modes when switched on. The completely automatic horizontal and vertical self-leveling mechanism has an Out-of-Level shutoff mode that reduces any user error caused due to uneven surfaces. The wireless remote control makes for a quick and hassle-free one-person setup and operation.The DeWalt DW077KDT rotary laser kit is bundled with DeWalts 18V extended run-time battery and tune-up mode charger that can operate using 9.6V to 18V DeWalt batteries. The package includes a 1-hour charger, laser target card, laser enhancement glasses and heavy-duty kit box (w/ padded interior).

DeWalt DW082K Laser Plumb Bob

The DeWalt DW082K Self-Leveling Laser Plumb Bob kit is just the right tool for providing accurate plumb reference. Two laser beams plumb up and plumb down, project two bright dots. The self-leveling plumb bob is accurate to 1/8 @ 50. The accuracy level is such that, after the spots on the floor and ceiling are marked as indicated by these dots, when rotated in 90-degree increments for a full 360 degrees, the laser dots precisely zero-in on the marked spots. It self levels reasonably quickly, and the out-of-level sensor alerts if it is positioned out of its self-leveling range. Lights and fans can easily be installed even on sloped ceilings, using this Laser Plumb Bob. The overhang of the frame gives good visibility of the lower dot for reference or marking purposes. The DeWalt DW082K Laser Plumb Bob can be used to plumb walls, during stick framing and even to locate the end of the top plate of a wall. Simple to operate, the cross-hair beam pattern makes it easy for the user to find the center of beam, and the magnets help to conveniently attach the DeWalt DW082K Laser Plumb Bob to metal tracks.

DeWalt DW073KD Heavy-Duty 18V Cordless Rotary Laser - Combo Kit (Interior/Exterior)

The DeWalt DW073KD Heavy-Duty 18V Cordless Rotary Laser - Combo Kit provides accuracy, durability, versatility and visibility. It is designed for interior and exterior applications on both residential and commercial sites. For professionals, it is ideal for ceiling and wall installers, concrete workers, masons, remodelers and deck builders. The DW073KD is a manually leveled rotary laser that has dual side-by-side laser diodes for an extremely bright beam and is accurate to 1/4 at a radius of 100 (1/8 inch at 50) with a visible diameter of 200. Long-range leveling to 600 is possible with the digital laser detector. Laser setup is quick and easy with the tools built-in three-in-one floor mount, adjustable rack-and-pinion wall mount and 5/8-11 inch threaded tripod insert.

DeWalt DW073KDR Factory Reconditioned DW073KD 18-Volt Cordless Rotary Laser - Combo Kit (Interior/Exterior)

The DeWalt DW073KD is a factory reconditioned power tool. It is designed for accuracy, durability, versatility, visibility, for interior and exterior applications on both residential and commercial sites. For professionals, it is ideal for ceiling and wall installers, concrete workers, masons, remodelers and deck builders. The DW073KDR is a manually leveled rotary laser that has dual side-by-side laser diodes for an extremely bright beam and is accurate to 1/4 inch at a radius of 100 (1/8 inch at 50) with a visible diameter of 200. A long-range leveling up to 600 is possible with the digital laser detector. Laser setup is quick and easy with the tools built-in three-in-one floor mount, adjustable rack-and-pinion wall mount and 5/8-11 inch threaded tripod insert.

DeWalt DW0710 Wall & Ceiling Mount (for DW071 Rotary Laser)

The DeWalt DW0710 Wall & Ceiling Mount is designed to accommodate the DeWalt DW071 rotary laser. The mount provides stability and security in fine detail projects. The operator can alter the mount's elevation for tasks at varying levels by adjusting the rack and pinion height. To move the mount, the operator has to employ a quick release clamp for speedy set up and removal. The mount also features a rough leveling knob for application on uneven, less-than-vertical surfaces to maximize its utility.

DeWalt DW0730 Laser Target Card

The DeWalt DW0730 is a Laser Target Card. The DW0730 laser target card is used in conjunction with the rotary laser to enhance the visibility of the beam. The magnetic base can be attached to drop ceiling grid or steel studs for easy and accurate layout.

DeWalt DWS5030 Replacement Glide Strip For TrackSaw

Replacement glide stripFor use with Dewalt Corded and Cordless TrackSawsTrackSaws Sold Separately

DeWalt DW906 14.4V Cordless Heavy-Duty Pivoting Head Flashlight

The DeWalt DW906 is a 14.4V Cordless Heavy-Duty Pivoting Head Flashlight. This flashlight is powered by the DEWALT 14.4V "system" of battery packs. It has spare extra-bright Xenon bulb inside lens cover which allows user to always have a working light. Lightweight, compact design makes the flashlight durable and portable.

DeWalt DW904 Heavy-Duty 12V Cordless Pivoting Head Flashlight

The DeWalt DW904 is a Heavy-Duty 12V Cordless Pivoting Head Flashlight. The flashlight is powered by the DEWALT 12V system of battery packs. The flashlight has spare extra-bright Xenon bulb inside lens cover which allows user to always have a working light. Lightweight, compact design makes the flashlight durable and portable.

DeWalt DC547K 18V Cordless Adhesive Dispenser

The DeWalt DC547K is an 18V Cordless Adhesive Dispenser. The tool delivers up to 650 lbs pushing force to dispense the highest viscosity adhesives and sealants. It has auto-reverse feature helps reduce drips, waste, & clean-up. The dispenser has set-and-forget variable speed control for consistent flow rates & bead control.

DeWalt DC545K 18V Cordless Adhesive Dispenser

The DeWalt DC545K is an 18V Cordless Adhesive Dispenser. The dispenser features 360 rotatable cartridge holder which fits 10 oz, 1/10 gallon and 300 ml to 310 ml cartridges. The tool delivers up to 650 lbs pushing force to dispense the highest viscosity adhesives and sealants. It has auto-reverse feature which helps reduce drips, waste, & clean-up. The dispenser has set-and-forget variable speed control for consistent flow rates & bead control.

DeWalt DC720KA 18-Volt Cordless Drill/Driver Kit

The DeWalt DC720KA Compact 1/2 drill/driver provides users with superior ergonomics, better performance and enhanced durability. The DeWalt DC720KA offers end-users a dual- speed range of 0-500 and 0-1700 respectively, all packed into 4.8 pounds of compact weight and size. In addition, the DeWalt DC720KA has new components including a frameless motor that delivers 410 unit watts of power and all metal planetary gears for enhanced durability. Built in features include a LED light, 1/2 single sleeve ratcheting chuck to reduce bit slippage and onboard bit storage.

DeWalt DC926KAR Factory Reconditioned DC926KA 18-Volt Cordless Hammer Drill

The factory reconditioned DeWalt DC926KA Cordless Hammer Drill symbolizes ergonomic perfection between balance, size and weight. Its high efficiency motor delivers 480 unit watts out of max power, and is housed in a remarkably lightweight (6 lbs.) body. The unique 3-speed transmission system of DeWalt DC926KA Cordless Hammer Drill, along with 22 clutch settings, gives its user full control over the tool and makes it versatile for different drilling and fastening applications. The heavy-duty ½ self-tightening chuck of this Cordless Hammer Drill keeps the bits tight throughout the use and ensures a better bit gripping torque. The XRP batteries have extended run time and a long life as well. The 360 handle allows the user to comfortably work with the Cordless Hammer Drill at any angle. The DeWalt DC926KA kit includes a heady-duty case and a charger for the tool.

DeWalt DC385 18V Heavy-Duty Cordless Reciprocating Saw - Tool Only

The DeWalt DC385 is a 18V Heavy-Duty Cordless Reciprocating Saw - Tool Only. The 18V Cordless Reciprocating Saw provides 1 stroke length and 2900 SPM for fast cutting. Its keyless blade clamp allow to change the blade quickly. The electric brake prevents blades from breaking. It is compact & lightweight tool. The cordless saw has an anti-slip comfort grip which provides increased comfort and control while operating.

DeWalt DW937K 14.4V Cordless Reciprocating Saw Kit, 0-2700 SPM

The DeWalt DW937K is a 14.4V Cordless Reciprocating Saw Kit. 14.4V of brute cordless power with 0 to 2700 strokes per minute and a 7/8 inch stroke length, the DW937 cuts faster than a 4 Amps corded saw. It weighs only 6 lbs and is lighter than any corded saw. The saw comes with an electric brake, which prevents blades from breaking when exiting a plunge cut.

DeWalt DC550K Heavy-Duty 18-Volt Cordless Cut-Out Tool

The lightweight DeWalt DC550K heavy-duty cordless cut out tool is powered by an extended runtime 18V DeWalt battery and operates at 26000 RPM. The cut out tool uses 1/4 inch and 1/8 inch diameter collets and weighs just 4.5 pounds. The cordless tool also features tool-free bit change for quick and easy changing of bits, thereby lessening downtime and enhancing productivity. Its 26000 RPM motor provides better cutting power, which makes the work faster and easier. Its dust sealed switch provides durability and long switch life.Other features such as a slim body design and an adjustable guide add to the usage and convenience of this cordless cut out tool.

DeWalt DW059K-2 18V Heavy-Duty Cordless High Torque Impact Wrench Kit, 1650 RPM

The DeWalt DW059K-2 is a 18V Heavy-Duty Cordless Impact Wrench Kit. It part of the DeWalt line of heavy-duty cordless impact drivers and wrenches. The cordless impact wrench delivers 300 ft-lbs of maximum torque. Combining high torque with 1650 RPM and 2600 BPM, it provides the power and speed to drive larger lag screws into pressure treated materials and hard woods. The DW059K-2 wrench is the only cordless impact wrench equipped with a rocker switch for quick and easy forward and reverse.

DeWalt DC519 28V Cordless Floodlight With NANO Technology

DeWalts 28V Flexible Floodlight with NANO Technology is powered by an exclusive 28V nano-phosphate lithium ion battery. DeWalt 28V flexible floodlights provide lighting capacity well beyond any traditional flashlight. They feature a flexible neck which allows light to be projected in any direction whether standing on its base, wrapped around a pipe, or hanging from a rafter, true hands free lighting.

DeWalt DC509 Heavy-Duty 36V Cordless Flexible Floodlight With NANO Technology

The DeWalt DC509 is a Heavy-Duty 36V Cordless Flexible Floodlight With NANO Technology. The flex-neck design with lockable head clips allows for hands-free use and versatility to stand or hang the light. Wide angle beam of light provides more light than a conventional flashlight. The Xenon Bulb provides an extra bright beam of light compared to normal flashlights. The 36V Battery offers 8-hours of run-time on a single charge. The DeWalt exclusive 36V nano-phosphate lithium ion battery weighs the same as an 18V NiCd battery, delivers twice the power and runtime of 18V and 2000 recharges.

DeWalt DC830KA 14.4V Cordless 1/2 Inch Impact Wrench Kit

The DeWalt DC830KA 1/2 Heavy-Duty 14.4 Volt Impact Wrench provides a light weight, compact and durable solution for a wide range of light to medium fastening applications. The DeWalt DC830KA offers exceptionally small size just 5-3/4 front to back and with the battery weighs only 3.9 lbs. The DeWalt DC830KA has a DeWalt built; high power motor with replaceable brushes delivers maximum performance, durability and serviceability. The DeWalt DC830KA has a variable speed reversing switch which provides control for both setting and removing fasteners and an electric brake that prevents completely backing out and losing fasteners. Built-in features include a bright LED work light and onboard bit storage. The DeWalt DC830KA features advanced handle ergonomics and is equipped with a textured anti-slip rubber grip for extended user comfort and productivity.

DeWalt DC550KAR Factory Reconditioned DC550KA Heavy-Duty 18-Volt Cordless Cut-Out Tool

The DeWalt DC550KA is a Factory Reconditioned Heavy-Duty 18V Cordless Cut-Out Tool. The tool has all the features of the DeWalt DW660 cut-out tool, but in the convenience of cordless. The cordless cut-out tool has a 26000 RPM motor that cuts through drywall, plywood, ceramic tile, plexiglas, cement board, countertops and acoustical ceiling tile. It offers a tool-free bit change, so no longer waste time looking for lost wrenches and a dust-sealed switch to prevent contamination and allow for longer motor life.

DeWalt DC920KR Factory Reconditioned DC920K Heavy-Duty XRP 1/2-Inch 18-Volt Cordless Drill/Driver With Case - Tool Only

The DeWalt DC920K is a Factory Reconditioned Heavy-Duty XRP 1/2 inch 18V Cordless Drill/Driver With Case - Tool Only. The drill/driver uses a DeWalt built high power, high efficiency motor to deliver 510 unit watts out of power for maximum performance in all drilling and fastening applications.

DeWalt DC310BK 6-1/2 Inch 28-Volt Cordless Circular Saw with NANO Technology - Tool Only, With Case

The DeWalt DC310BK is a 6-1/2 Inch 28-Volt Cordless Circular Saw. With the power of 28 Volts the DC310BK is light enough for all day use and has enough power to handle any work site job. With the standard features expected from DeWalt® the 28-Volt line of tools will soon be a leader in the field. Battery and Charger are NOT Included.

DeWalt DC310B 6-1/2 Inch 28-Volt Cordless Circular Saw with NANO Technology - Tool Only

The DeWalt DC310B is a 6-1/2 Inch 28-Volt Cordless Circular Saw. With the power of 28 Volts the DC310BK is light enough for all day use and has enough power to handle any work site job. With the standard features expected from DeWalt® the 28-Volt line of tools will soon be a leader in the field. Battery and Charger are NOT Included.

DeWalt DC390 18V Cordless Circular Saw - Tool Only

The DeWalt DC390 is a 18V Cordless Circular Saw Tool Only. The saw uses 6-1/2 inch carbide tipped blade for 2x cutting capacity at 90 and 45. It has high strength magnesium shoe and upper guard provides increased durability. 0-50 bevel capacity provides additional capacity for a multitude of applications. It features fan-cooled motor with replaceable brushes for maximum power and durability.

DeWalt DC520K 18V Heavy-Duty Cordless Drywall/Deck Screwdriver Kit

The DeWalt DC520K is an 18V Heavy-Duty Cordless Drywall/Deck Screwdriver Kit. It has dual speed ranges (0-900/0-2900 RPM), high speed for drywall, low speed for decking. The screwdriver kit features depth sensitive set and forget nosepiece for consistent fastener depth. It has built high-performance motor with fan cooling which delivers maximum power and durability.

DeWalt DC825 18V Cordless Impact Driver, 0-2400 RPM - Tool Only

The DeWalt DC825 is a 18V Cordless Impact Driver - Tool Only. The high performance impact driver delivers a speed of 0-2400 RPM and 0-2700 BPM. A maximum torque of 1330 in-lbs helps to perform wide range of fastening applications. The compact size & light weight allows access into tighter areas and reduces user fatigue. It has a textured anti-slip comfort grip which provides maximum comfort.

DeWalt DW920K-2 7.2V Cordless Screwdriver Kit, 0-500 RPM******

The DeWalt DW920K-2 is a 7.2V Cordless Screwdriver Kit. A two-position handle allows adjusting the tools configuration as needed to work in confined areas. The 7.2V motor which turns at 0-500 RPM and delivers 80 in-lbs of torque helps to finish the job easier and faster. The clutch setting can be adjusted to 16 different positions which help to eliminate the problem of stripping out of screws. Also, changing the bit is simple with an industrial quick-release keyless chuck.

DeWalt DC212KAR Factory Reconditioned DC212KA 18-Volt Cordless 7/8-Inch SDS Hammer

The DeWalt Factory Reconditioned DC212KA is a Heavy-Duty 18V Cordless 7/8" SDS Hammer. The SDS hammer features electro-pneumatic hammer mechanism for fast penetration and low vibration. Its compact L-Shape design allows access in tight spaces while providing optimal balance for the user. The hammer has 360 side handle for better control and ease of use in tight spaces. Its shocks has active vibration control which significantly reduces vibration and increases user comfort and productivity.

DeWalt DW987K2R Factory Reconditioned DW987K2 18-Volt Cordless Drill, 2000 RPM

DeWalt DW987K2R is a factory reconditioned heavy-duty cordless drill driver. This power drill sports Dewalts three-speed transmission system. This enables the tool deliver three different speed ranges (0-450/1450/2000 RPM) at three different gear settings, making the operation smoother and faster. With a weight of 6 lbs, With a high torque motor this tool delivers a maximum torque of 450 in-lbs enduring toughest job applications. DeWalt DW987k2R operates on an extended run time batteries that provide a running power of 18V. The tool features a 1/2-inch ratchet locking system and an all-metal chuck with carbide jaws that prevents the drill bit from loosening or slipping during operation. The ergonomic tool trigger design has a rubber grip that provides comfort and ease and prevents user fatigue even during longer working hours. DeWalt DW987K2R also offers an all-metal gear case along with an option to add a side handle that rotates 360 degrees for better gripping of the cordless drill. Weighing just 6 lbs, this portable power drill/driver is ideal for jobsites as well as home.

DeWalt DC315BK 28V Cordless Reciprocating Saw With NANO Technology - Tool Only with Case

The DeWalt DC315BK is a 28-Volt Cordless Reciprocating Saw With NANO Technology, Tool Only with Case. This 28-Volt recip saw is powerful but light weight, allowing users to get the most out of its use.Battery and Charger are NOT Included.

DeWalt DC821KA 18V Cordless 1/2 Inch Impact Wrench Kit

The DeWalt DC821KA 1/2 Inch Heavy-Duty 18V Impact Wrench offers the ergonomics and control features of a compact impact wrench with its light weight, small size and comfortable handle set, as well as the constant-duty durability and runtime of larger wrenches. The DeWalt DC821KA 18V impact wrench has a high speed all-metal transmission that delivers 0-2,100 RPM for increased productivity. The DeWalt DC821KA has a DeWalt built; high power motor with replaceable brushes that delivers maximum performance, durability and serviceability. The DeWalt DC821KA has a variable speed reversing switch which provides control for both setting and removing fasteners and an electric brake that prevents completely backing out and losing fasteners.

DeWalt DW0732 Digital Laser Detector & Clamp

DeWalt DW0732 Digital Laser Detector & Clamp. It is used to enhance the versatility of laser with the digital laser detector and detector clamp. The digital laser detector detects the rotary laser beam inside and outside to a distance of 600. With a front and rear LCD display the operator can view the display much easier than single display models. The volume control has three different settings; high, low and mute. Any battery wattage is eliminated due to the automatic shutoff that turns off the detector if it is left inactive for five minutes. The magnets are located on top to allow the detector to be attached to ceiling track or steel studs. The clamp has a capacity of 3-1/2 so it can be attached to a grade rod or to dimensional 2 x 4 lumber. The quick release clamp is designed for fast and easy setup.

DeWalt DC9PAKIA 18V 9-Tool Cordless Combo Kit

Powered by 18 Volts battery the DeWalt DC6PAKRA comprises DC925 XRP 1/2" hammerdrill/drill/driver, DC390 XRP circular saw, DC385 XRP reciprocating saw, DW059 ½ inch high-torque impact wrench, DW056 1/2" impact driver, DC330 XRP variable speed jig saw, DC410 cut-off tool, and DC550 18V cut-out tool. As the Category Winner (Best In Test) of the Tools Of The Trade 07, the DC925 XRP 18V cordless hammer drill boasts its 510 units watt out based performance. With three different variable speed ranges (0 to 450, 0 to 1,500, and 0 to 2,000 RPM), the heavy duty DC925 XRP proves its versatility besides meeting the production speed of any professional. Weighing 6.1 lbs and featuring a compact size the power drill easily fits even into the tightest jobsite condition without being strenuous on the users arm.The DC390 XRP circular saw sports a 6 ½ inch carbide tipped blade. This helps the saw to cut at 2x speed when used at 90 or 45-degree angles. The 3700-RPM ensures faster cuts at no additional manual effort. Besides, its 0 to 50 degree bevel capacity adds to its application versatility. Most importantly, this circular saw features a fan-cooled motor that prevents the motor from getting over heated and eventually boosts the durability and longevity of this tool.The 1 1/8 inch stroke length backed by a cutting speed ranging from 0 to 3,000 SPM, makes the DC385 XRP reciprocating saw a fast cutter in its class. For different types of flush cutting the power saw features the 4-position blade clamp. This makes the saw versatile and increases the production speed. With anti slip comfort grip this reciprocating saw offers both comforts and control.The DW059 1/2 inch high torque impact wrench delivers a maximum torque of 300 ft-lbs, this enables the heavy duty wrench to perform a host of fastening applications. The magnesium gear case and all metal transmission enhance the durability of this tool. For added security this impact wrench features heavy duty impacting mechanism that directs the torque towards the fastener and prevents any kick back.In a short stature the look of DW056 18V impact driver may deceive any user who is in search of a power driver. However, once one get accustomed with its 1,170 in-lbs maximum torque its become nearly difficult to think of any other driver. With a speed range of 0 to 2,4000 RPM this driver drives almost any thing, fast and stable, without demanding additional pressure from the user.With all metal lever action, the DC330 XRP variable speed jigsaw enables fast blade change. The key less shoe bevel detents at 0, 15, 30, and 45 degrees to provide convenient bevel cutting at minimal effort. This versatile jig saw offers variable speed ranging from 0 to 30,000 SPM and can be used on multitude of materials in different applications.The 7 lbs weighing DC410 18V cut-off tool is easy to port and use without being much strenuous on the users arm. This power tool cuts at 6,500 RPM and saves a lot of production time. Besides, the spindle l

DeWalt DC022R Factory Reconditioned DC022 Cordless/Corded Worklight with Dual-Port Battery Charger, 38 Watt, 12V to 18V

The DeWalt DC022 is a Heavy-Duty Cordless/Corded Worklight With Dual Port Battery Charger. The cordless/corded 38W fluorescent worklight runs on 12-18V DeWalt batteries or AC power and provides area lighting without the extreme heat of halogen. It has a built-in 1 hour dual port battery charger which charges (2) DeWalt 7.2-18V batteries in one hour or less. It features (3) GFCI protected power outlets which offers more versatility for jobsite power. A spring loaded battery hold down keeps batteries in place when transporting from place to place. Its compact design provides quick and easy fold-up, transport and storage.

DeWalt DC500 2 Gallon Cordless/Corded Wet/Dry Vacuum

The DeWalt DC500 is a Light, portable, versatile and powerful Vacuum. It is powered by a 12-18V battery, allowing for use when the powers off. The five hose is flexible and the cleaning tools fit on board. The suction is impressive, whether on AC or DC power.

DeWalt DW087K Self-Leveling Line Laser (Horizontal & Vertical)

The DeWalt DW087K self-leveling line laser is accurate to +/- 1/8 @ 30 for level applications and is self-leveling within 4. The magnetic pivot bracket in the DeWalt DW087K helps the laser attach itself to any metal surface to exploit nearly 360 operation. In addition, the DeWalt DW087K comes with a universal wall mount as well. Designed to save time on the jobsite, the laser has a one-button operation. The DeWalt DW087K self-leveling line laser works great for hanging items or for mounting boxes, steel framing walls, ceilings and trim setting cabinets. The full over-molded housing of DeWalt DW087K ensures durability in the harsh jobsites. It has an out of level indicator in which the beams flash when the line laser is out of level. The tool can easily take care of leveling requirements for steel framing in walls, ceilings, soffits, and trim work in setting cabinets and aligning head casings. The kit includes line laser, kit box and 3 AA batteries.

DeWalt DC825KA 18-Volt Cordless 1/4-Inch Impact Driver Kit

The DeWalt DC825KA Impact Driver, at 5-3/4, weighs only 4.6 pounds but delivers 1330 in-lbs of torque for your fastening application needs. With a 2-speed motor gearing up to 0-2400rpm and 0-2700 rpm, you get a fast speed in a small size. The DeWalt DC825KA has replaceable brushes for increased serviceability, textured anti-slip grip for maximum comfort, and a durable magnesium gear case with an all metal transmission for extended durability.

DeWalt DWS5029 Tool TrackSaw Anti Splinter Strip Replacement

Replacement zero-clearance anti-splinger edgeFor use with Dewalt Corded and Cordless TrackSawsTrackSaws Sold Separately

DeWalt DC385K 18V Heavy-Duty Cordless Reciprocating Saw Kit, 0-2900 SPM

The DeWalt DC385K is a 18V Heavy-Duty Cordless Reciprocating Saw Kit. The 18V Cordless Saw kit provides 1 inch stroke length and 2900 SPM for fast cutting. Its keyless blade clamp allow to change the blade quickly. The electric brake prevents blades from breaking. It is compact & lightweight tool. The cordless saw has an anti-slip comfort grip which provides increased comfort and control while operating.

DeWalt DC612KAR Factory Reconditioned DC612KA XRP 12V/14.4V 16 Gauge Straight Finish Nailer Kit

The DeWalt DC612KA Factory Reconditioned Cordless Finish Nailer powered by DeWalt XRP battery system cycles fast and drives nails in fully without leaving a surface blemish. The XRP batteries are designed to perform 40% more than standard batteries, and provide extended run-time and also ensure a long work life. DeWalt offers the finish nailer in both straight and 20 angled magazine configurations, which accept most brands of 16 gauge straight nails and ensures consistent nail penetration into both soft and hard joints. Portable and versatile, the is ideal for nailing, installing molding, chair rails, cabinetry and other fine finish applications. The finish Nailers top cap is impact resistant and is easily removable for troubleshooting.. The headlights help while working in dimly lit conditions. The numbered, 6-position dial helps in easy referencing of depth levels. The DeWalt DC612KA Finish Nailers nosepiece is designed to for the removal of jammed nailers, without the need to use tools.

DeWalt DC520KAR Factory Reconditioned DC520KA Heavy-Duty 18-Volt Cordless Drywall/Deck Screwdriver Kit

The DeWalt DC520KA is a Factory Reconditioned Heavy-Duty 18V Cordless Drywall/Deck Screwdriver Kit. It features dual speed ranges 0-900/0-2900 RPM, high speed for drywall, low speed for decking applications. The depth sensitive set and forget nosepiece is for consistent fastener depth. The fan cooled motor provides additional power and durability.

DeWalt DC495KA 18V 18 Gauge Cordless Offset Shear Kit, 0 - 2300 SPM, 18 gauge

The DeWalt DC495KA is an 18V 18 Gauge Cordless Offset Shear Kit. The offset shear design can easily turn and cut circles. It also can easily cut through 20 gauge spiral duct seams. Head swivels 360 which allows user to access tight quarters while maintaining comfort.

DeWalt DW936KR Factory Reconditioned DW936K Heavy-Duty 5-3/8 Inch 18-Volt Cordless Trim Saw Kit

The DeWalt DW936K is a Factory Reconditioned Heavy-Duty 5-3/8 inch 18V Cordless Trim Saw Kit. It features lightweight & compact design which allows for use in confined work areas. The 5-3/8 inch blade can cut a 2 x 4 in one pass. 50 bevel provides additional capacity for specialty applications. DeWalt-built high-performance motor with fan cooling delivers maximum power and durability.

DeWalt DC233KLR Factory Reconditioned DC233KL 36-Volt Cordless 1-Inch SDS Rotary Hammer Kit with NANO? Technology

The DeWalt DC233KL is a Factory Reconditioned Heavy-Duty 36V Cordless 1 SDS Rotary Hammer Kit with NANO? Technology. It features SHOCKS? Active Vibration Control which significantly reduces vibration and increases user comfort and productivity. The compact L-shape design allows access in tight spaces while providing optimal balance to the user. The 2.0 ft-lbs impact energy provides corded power without the cord. The DeWalt-built high torque, high-efficiency motor delivers maximum performance in all drilling applications.

DeWalt DC930KR Factory Reconditioned DC930K XRP 1/2-Inch 14.4-Volt Cordless Drill/Driver - Tool Only with Case

The DeWalt DC930 is a Factory Reconditioned Heavy-Duty XRP 1/2 14.4V Cordless Drill/Driver. It has DeWalt built high power, high efficiency motor which delivers maximum performance in all drilling and fastening applications. The patented 3-speed all-metal transmission matches the speed to the application for optimal performance. The heavy-duty 1/2 ratcheting chuck locks the sleeve to prevent bits from slipping and falling out.

DeWalt DC910B Cordless 1/2-Inch 28-Volt Hammerdrill/Drill/Driver With NANO Technology - Tool Only

The DeWalt DC910B is a Cordless 1/2-Inch 28-Volt Hammerdrill/Drill/Driver With NANO Technology. With the power of 28 Volts the DC310BK is light enough for all day use and has enough power to handle any work site job. With the standard features expected from DeWalt® the 28-Volt line of tools will soon be a leader in the field. Battery and Charger are NOT Included.

DeWalt DC984B 14.4V 1/2 inch Heavy-Duty XRP Cordless Hammerdrill/Drill/Driver, 30600 BPM - Tool Only

The DeWalt DC984B is a 1/2 inch 14.4V Heavy-Duty XRP Cordless Hammerdrill/Drill/Driver - Tool Only. It uses a DeWalt built high-torque, high efficiency motor to deliver 450 in-lbs of torque for drilling large diameter holes and driving large screws. The XRP drill comes equipped with a patented 3-speed transmission. The 3-speed option allows the drill to be set at the optimum speed range for the application being performed to maximize performance. The DC984 has a maximum speed of 1800 RPM which is 29% faster than high speed. The Cordless Hammerdrill/Drill/Driver also has a maximum BPM speed of 30600 BPM which allows for high performance drilling in masonry applications.

DeWalt DW7187 Heavy-Duty Adjustable Miter Saw Laser System

The DW7187 Adjustable Miter Saw Laser System was designed for the professional miter saw user and will only fit the DeWalt DW715, DW716 & DW718 12 Miter Saws. The laser module mounts on the upper guard of the miter saw and the power supply, which delivers the ability for the laser to be turned on and off independent of blade rotation, mounts behind the saws handle. The laser is encased in a durable protected housing designed to meet the demands of the jobsite and shop.

DeWalt DC490KA Heavy-Duty 18V Cordless 18 Gauge Swivel Head and Shear Kit, 0-2300 SPM

The DeWalt DC490KA Cordless Shear is powered by a high performance 18V motor, which can slide right through wood, plastic and sheet metal. This Cordless shear has an 18 gauge, 360 swivel head that can cut into any corners and adds to the versatility, control and comfort. With an 18-28 gauge capacity in steel the DeWalt DC490KA Cordless Shear blades cut 0 to 2,300 spm with a minimum cutting radius of 5.5and remove a 7/32 inch metal strip which rolls out of the operational area, providing consistent and accurate cuts. The cordless mobility means that the tool can be taken to the work piece, and the tool weighs just 6.1 lbs. The motor is internally fan-cooled for easier handling and durability. The replaceable brushes add to the serviceability of the tool. The DeWalt DC490KA Cordless Shear operates at 18 V with a XRP extended run-time battery that provides long run-time and battery life for the kit. The Kit includes shear, blade wrench, one-hour charger, two DC9096 18V XRP Battery Packs, and a heavy-duty case.

DeWalt DW087K Line Laser

Couldn't find DeWalt Cordless Laser Levelshere? Are you looking for something else? Search our partner sites:

                DeWalt Cordless Laser Levels