Concrete Mixers      

Concrete Mixers tools and information

Find Concrete Mixers at best prices and buy!

Makita PC1100 Concrete Planer, 10000 RPM, 8.5 Amps

The Makita PC1100 is a Concrete Planer with an 8.5 Amps, 10000 RPM motor. The planer provides a smooth finish on concrete surfaces and levels concrete seams with precision. It features a dry cutting diamond wheel for planing without a water feeding system. It keeps surfaces clean with the handy dust bag on this tool.

Flex LD1509FR Lightweight Dustless Concrete Grinder, 10000 RPM, 11 Amps

The Flex LD1509FR is a Lightweight Dustless Concrete Grinder. The heavy-duty full wave electronic 5 dustless concrete grinder is used to grind away seams, cracks, uneven surfaces and to remove residual coatings, paints and adhesives. No rasping or jumping. The special flexible rubber vacuum ring prevents stones and concrete chips from flying.

DeWalt DW3521 7Inch x 1/8Inch Concrete/Masonry Abrasive Saw Blade

The DeWalt DW3521 is a 7" x 1/8" Concrete/Masonry Abrasive Saw Blade. The blade is constructed with two pieces of extra-strength fiberglass for long life. It features high quality resin bonds that are 100% inspected before use for product consistency and quality.

MK Diamond MK-1608H 157866 Premium 16-Inch Walk Behind Concrete Saw

The MK Diamond MK-1608H 157866 is a Premium 16-Inch Walk Behind Concrete Saw. A 16-Inch blade capacity provides for a depth of cut of 5-5/8. A reinforced box chassis provides the rigidity to prevent frame flex, and the 20 wide wheel base evenly distributes the engine weight over the frame for stability and improved tracking. The MK-1608 H Premium is a gas powered walk-behind concrete saw with an 8 hp Honda motor. The MK-1608 H is engineered for compactness, maneuverability and reliability. The MK-1608 H Premium cuts left and right and comes complete with a lifting bale, tach/hour meter, built-in depth gauge and 14 MK-799D dry cutting diamond blade.

DeWalt DW4428 4Inch x 1/8Inch x 5/8Inch Concrete/Masonry Cutting & Grinding Wheel

The DeWalt DW4428 is a 4" x 1/8" x 5/8" Concrete/Masonry Cutting & Grinding Wheel. It has 3 full sheets of fiberglass for durability and safety. It uses 100% virgin grain for enhanced removal and long life. The proprietary material mix ensures premium performance.

DeWalt DW4528 4-1/2Inch x 1/8Inch x 7/8Inch Concrete/Masonry Cutting & Grinding Wheel

The DeWalt DW4528 is a 4-1/2 X 1/8 X 7/8 Concrete/Masonry Cutting & Grinding Wheel. It has 3 full sheets of fiberglass for durability and safety. It uses 100% virgin grain for enhanced removal and long life. The proprietary material mix ensures premium performance.

DeWalt DW4524 4-1/2Inch x 1/4Inch x 7/8Inch Concrete/Masonry Cutting & Grinding Wheel

The DeWalt DW4524 is a 4-1/2 x 1/4 x 7/8 Concrete/Masonry Cutting & Grinding Wheel. It has 3 full sheets of fiberglass for durability and safety. It uses 100% virgin grain for enhanced removal and long life. The proprietary material mix ensures premium performance.

DeWalt DW4429 4Inch x 1/4Inch x 5/8Inch Concrete/Masonry Cutting & Grinding Wheel

The DeWalt DW4429 is a 4 X 1/4 X 5/8 Concrete/Masonry Cutting & Grinding. It has 3 full sheets of fiberglass for durability and safety. It uses 100% virgin grain for enhanced removal and long life. The proprietary material mix ensures premium performance.

Flex 304727 5Inch Dry Diamond Grinding Pad for LD 1509 FR Concrete Grinder

The Flex 304727 is a 5" Dry Diamond Grinding Pad for LD 1509 FR Concrete Grinder. The Thermojet Super pad is for surface grinding on thermo-plastic layers, coated sidewalk plates, for balcony and concrete renovation. The ingenious backing pad with the angled diamond segments in double rows ensures a 30% faster job completion. It has high number of specially shaped segments and the oval & patented turbo extraction bore holes (on the 125 pad) which creates an ultra-strong air suction. It extracts the aggressive swarf, prevents the plugging and overheating of the segments and reduces the wear.

Makita BVR850Z 18V LXT Lithium-Ion Cordless 8 Ft. Concrete Vibrator - Tool Only

The Makita BVR850Z is a 18V LXT Lithium-Ion Cordless 8 Ft. Concrete Vibrator - Tool Only. The Makita built motor produces 13000 VPM to help increase strength of concrete. The Makita BVR850Z vibrator has a compact design at only 105-1/2 inch long and weighs only 11.7 lbs for less operator fatigue. The ergonomic dual directional switch on the Makita BVR850Z conveniently holds the tool either horizontal or in vertical positions. The LXT Lithium-Ion provides longer run time, 5x lower self-discharge (for use any time) and 16 firm holding contact terminals (for constant high power). The Makita BVR850Zs 45-minute Optimum Charger and battery communicates throughout the charging process using the built-in chip in the battery and built-in CPU chip in the charger. The Charger also uses Active 3 Control for current control, thermal control & voltage control.

MK Diamond MK-Manta III 157448 Combo Fixed Base Concrete Core Rig, 0-450/0-950 RPM

MK Diamond MK-Manta III 157448 is a Combo Fixed Base Concrete Core Rig. This tool has a new innovative tool-free vacuum base mounting design. The new combination base provides quick change over from vacuum to anchor operations. It also has a dual switch/outlet control panel & amp meter.

Makita DPC7311HD 14-Inch Factory Reconditioned Concrete Power Cut-Off Tool

Foam-paper-nylon system with Advanced Directional Air Flow provides very clean air for better saw performanceReinforced aluminum blade guard with 70 range of limitless positioning using a marked knob handleOn/off/choke operating switch on a single lever for operator convenienceStarter grip and decompression valve located on the same side for faster startingWater kit is assembled to saw and can be used with garden hose, gravity tank, or pressure tankCushioned operator grips with 4 vibration-absorption rubber buffers for increased operator comfortImproved exhaust emissions are EPA Phase II compliant while maintaining power and performanceImproved ignition system with larger flywheel and rare earth magnets for more powerCutting arm position simply changes from center position to flush (outboard) position allowing cuts directly adjacent to curbShown with Makita A-94736 14" Segmented Rim Diamond Masonry Blade NOT included, but available for purchase right here at ToolKing.com!

Max HN120 PowerLite Concrete Nailer, 210 - 320 PSI, 50 Pins

-Extremely powerful -Extremely powerful-186 ft-lbs driving energy -Unique tangle free swivel fitting -Lightweight 6.4 lbs -Comes with plastic carry case

MK Diamond 156380 MK-Black Supreme 2Inch Wet Cutting Concrete Core Bit

The MK-Black is a supreme core bit engineered for exceptional footage and fast/aggressive drilling characteristics. Excellent performance in applications associated with moderate to high steel reinforcement.

MK Diamond 156390 MK-Black Supreme 5Inch Wet Cutting Concrete Core Bit

The MK-Black is a supreme core bit engineered for exceptional footage and fast/aggressive drilling characteristics. Excellent performance in applications associated with moderate to high steel reinforcement.

MK Diamond 156387 MK-Black Supreme 4Inch Wet Cutting Concrete Core Bit

The MK-Black is a supreme core bit engineered for exceptional footage and fast/aggressive drilling characteristics. Excellent performance in applications associated with moderate to high steel reinforcement.

MK Diamond 156382 MK-Black Supreme 2-1/2Inch Wet Cutting Concrete Core Bit

The MK-Black is a supreme core bit engineered for exceptional footage and fast/aggressive drilling characteristics. Excellent performance in applications associated with moderate to high steel reinforcement.

MK Diamond 156384 MK-Black Supreme 3Inch Wet Cutting Concrete Core Bit

The MK-Black is a supreme core bit engineered for exceptional footage and fast/aggressive drilling characteristics. Excellent performance in applications associated with moderate to high steel reinforcement.

MK Diamond 156391 MK-Black Supreme 6Inch Wet Cutting Concrete Core Bit

The MK-Black is a supreme core bit engineered for exceptional footage and fast/aggressive drilling characteristics. Excellent performance in applications associated with moderate to high steel reinforcement.

Makita D-00826-25 3/16 x 4-1/2 SDS Drill Bit 25 Pack

The D-00826-25 is a set of 25 3/16 x 4-1/2 SDS Drill Bits for drilling into brick, masonry and concrete.

Makita D-00832-25 3/16 x 6-1/4 SDS Drill Bit 25 Pack

The Makita D-00832-25 is a 25 Pack of 3/16 x 6-1/4 SDS Drill Bits for drilling into brick, masonry and concrete.

Makita D-01002-25 5/8 x 8 SDS Drill Bit 25 Pack

The Makita D-01002-25 is a set of 25 5/8 x 8 SDS Drill Bits for drilling into brick, masonry and concrete.

Makita D-00979-25 1/2 x 12-1/4 SDS Drill Bit 25 Pack

The Makita D-00979-25 is a set of 25 1/2 x 12-1/4 SDS Drill Bits for drilling into brick, masonry and concrete.

Makita D-00882-25 1/4 x 8-1/4 SDS Drill Bit 25 Pack

The Makita D-00882-25 is a set of 25 1/4 x 8-1/4 SDS Drill Bits for drilling into brick, masonry and concrete.

Makita D-00935-25 3/8 x 12-1/4 SDS Drill Bit 25 Pack

The Makita D-00935-25 is a set of 25 3/8 x 12-1/4 SDS Drill Bits for drilling into brick, masonry and concrete.

Bosch HS1915 2 inch x 12 inch SDS-Max Scraping Chisel

The Bosch HS1915 is a 2 inch x 12 inch SDS-Max Scraping Chisel. The chisel is used for scraping such as removing tile from a concrete floor.

Flex BED303 3 Speed Wet Core Drill with Stand, 1000 RPM, 20 Amps

The BED 303 is a heavy-duty, 3-speed stationary core rig designed for vibration free drilling up to 14” holes into concrete. No other unit in this class is as light and portable. It can be used for all types of concrete and reinforced concrete drilling applications. The extremely powerful 20 Amp electrical motor and 3-speed gearbox cover the entire range of the most important drilling operations involving diameters from 1-3/8” to 14”.

DeWalt DC530KAR Factory Reconditioned DC530KA 18-Volt XRP Cordless Pencil Vibrator Kit, 14000 VPM

The DC530KA is a Factory Reconditioned Heavy-Duty Cordless Pencil Vibrator Kit. The DC530KA is a full-power 1-1/8 pencil vibrator with the convenience of the DEWALT cordless 18-volt battery system. The pencil vibrator is ideal for small-scale reinforced concrete applications such as post-tension home slab perimeters, formwork, small-scale concrete street repairs, footers, insulated concrete forms or any application where proper concrete consolidation is critical. It has a 4 long flexible shaft for easy use and long reach. The 1-1/8 vibrator maintains 14,000 vibrations per minute under load for maximum consolidation efficiency. The kit includes two 18-volt XRP extended-runtime battery packs, a one-hour charger with automatic tune-up mode and a carrying bag to store the batteries and charger.

Makita 965-210-222 14 inch Abrasive Cut-Off Wheel

The Makita 965-210-222 is a 14 inch Abrasive Cut-Off Wheel. The wheel is used with power cutter to cut concrete, stone, masonry & asphalt bars, stock, pipes and other materials.

DeWalt D25304K Heavy-Duty 1-Inch L-Shape SDS Rotary Hammer Kit with Quick Change Removable Chuck & 3-Jaw Keyless Chuck

DeWalt D25304K Heavy-Duty 1-Inch L-Shape SDS rotary hammer kit has a quick change chuck plus an impact stop for drilling into wood and steel. It can be used for drilling anchor and fixing holes into concrete and masonry. It has electronic variable speed. Light chiseling into brick and concrete can be achieved with the rotation stop application.

Flex STN300 46-Inches Core Drill Stand for the BSW3023C Core Drill

The Flex STN300 is a Core Drill Stand for use with the Flex BSW3023C Core Drill. The STN300 Core Drill Stand helps stabilize the BSW3023C Core Drill by turning it into a stationary model for drilling into concrete. It is also used for orienting and holding the core-drilling apparatus for sampling concrete pilings. The 46-Inch tall stand is equipped with a quick-clamp mounting mechanism and an anchor plate to hold the core drill in position.

DeWalt DW4742 14Inch General Purpose Segmented Rim Industrial Dry/Wet Diamond Blade

The DeWalt DW4742 is a 14" general purpose segmented rim industrial dry/wet diamond blade. The DeWalt blade cuts faster and easier with less power requirements. Maximum blade strength in deep cuts provides straight constant depth of cut, eliminates multiple blade changing. It gives the ultimate performance in cutting concrete, reinforced concrete, stone, granite, brick and tile.

Mercer 601020 7Inch Masonry Cut-Off Wheel

The Mercer 601020 is a 7 Masonry Cut-Off Wheel. The masonry cut-off wheel is used on Portable/Hand held circular saw for fast and effective cut. The Mercer 601020 is used to cut masonry products, concrete, reinforced concrete, brick, block, roof tile, stone & artificial stone. The cut-off wheel has a silicon carbide grain and is made up of high strength phenolic resin bond. The Mercer blade is also double external reinforced with high tensile strength fiberglass.

DeWalt DW4714 7-Inch Extended Performance Turbo Diamond Blade

The DeWalt DW4714 lasts a hundred times longer than abrasive blades. Cuts faster and easier with less power requirements. Maximum blade strength in deep cuts. Provides straight constant depth of cut, eliminates multiple blade changing. Provides the ultimate performance in cutting concrete, reinforced concrete, stone, granite, brick and tile. 7-inch diameter, 5/8-inch with diamond knock out arbor.

DeWalt DW4702 7Inch Continuous Rim Industrial Dry/wet Cutting Diamond Blade

The DeWalt DW4702 is a 7 Continuous Rim Industrial Dry/wet Diamond Blade. The blade lasts 100 times longer than abrasive blades and cuts faster and easier with less power requirements. It provides straight constant depth of cut and eliminates multiple blade changing. It is extremely useful in cutting concrete, reinforced concrete, stone, granite, brick and tile.

Fein 6-35-02-114-01-7 2-1/2 Inch (63 mm) Diamond Segmented Grout Saw Blade

The Fein 6-35-02-114-01-7 2-1/2" Diamond Grout Saw Blade works with the Fein MultiMaster. You can use it to cut out marble and concrete joints. The 6-35-02-114-01-7 is also great for sinking ducts in plaster, brick, pumice, honeycomb stone, and autoclaved aerated concrete. This Diamond Saw Blade creates very little dust when used with the Fein MultiMaster and does not damage adjoining tiles. This premium Diamond Grout Saw Blade is long lasting and designed specifically for harder grouts, making them extremely useful in commercial applications.

Makita A-94736 14 inch Segmented Rim Diamond Masonry Blade

The Makita A-94736 is a 14 inch Segmented Rim Diamond Masonry Blade. It features segmented rim slots which help deliver a faster and cooler cut in multiple applications. It is used for general purpose cutting and is also great for cutting cured concrete, block and brick.

Bosch HCBG03 3/16 inch x 2 inch x 3 inch Blue Granite Hammer Drill Masonry Bit

The Bosch HCBG03 is a 3/16 inch x 2 inch x 3 inch Blue Granite Hammer Drill Masonry Bit. The masonry bit is ideal for concrete, brick & masonry. It has perfect "On-Center" diamond tip grinding. It features U-flute design which removes debris and increases speed.

Grip 54080 Multi Surface Push Broom

Bolted connection prevents handle form loosening Extra thick foam comfort grip Swivel hanger tip for easy storage Maximum filled, long lasting bristles Top quality laquered hardwood block Works great on smooth or rough surfaces including concrete, tile, and slate 58 steel handle

DeWalt DW0772 Digital Laser Detector & Clamp

The new DW0772 laser detector can locate the beam up to 600 (radius) from the laser. The detector is accurate to 1/25. It features front and rear LCD displays. It can withstand a one-story drop to concrete and is completely waterproof. The detector features 2 accuracy modes and 3 volume settings including mute.

AO Safety 94059 48-Inch Anchor Strap

The AO Safety 94059 is a 48 Anchor Strap. It is an excellent temporary anchorage solution for concrete forming work or tie-off on residential framing. It is designed to be cut and removed upon completion of job. It meets ANSI Z359.1, OSHA 1910/1926 safety standards.

MK Diamond 158729 MK-504CG1 5Inch 5/8-11 Nut Supr Speed Mount

MK Diamonds dry-grinding cup wheels have a unique shape which allow for superior form mark removal. These highly efficient cup wheels are also effective in the process of concrete deburring and rough-surface grinding. Their lightweight design and range of sizes ensure fast surface grinding with a minimum of operator fatigue.

Mercer 614300 4? x 3/32? x 5/8?C Small Diameter Masonry Cut-Off Wheel

The Mercer 614300 is a 4 x 3/32 x 5/8C Small Diameter Masonry Cut-Off Wheel. The Mercer 614300 is a small diameter, high speed and fully reinforced Cut-Off wheel. The masonry cut-off wheel is used for cutting masonry products, concrete, reinforced concrete, brick, block, roof tile, stone & artificial stone. The blade has an aluminum oxide grain and is made up of high strength phenolic resin bond. The cut-off wheel also has double external reinforcing with metal centers on 1/16 & 1/8.

DeWalt D28755R Factory Reconditioned D28755 14-Inch Cut-Off Machine, 15 Amps

The DeWalt D28755 is a Factory Reconditioned Heavy-Duty 14 Cut-Off Machine. Its 15.0 amp/5.3 HP motor provides high power and speed for metal and concrete cutting. An epoxy-coated field and armature provide long service life against abrasion from debris. The rotation directs sparks and debris towards the front of the tool and helps prevent climbing in the cut. The D28755s dust duct provides access to dust extraction while cutting concrete. The soft start reduces reactionary torque during start up and dust sealed switch protects against dust ingestion for longer switch life.

Milwaukee 5360-21 1-1/8Inch SDS L-Shape Rotary Hammer w/Removable Bit Holder

Double Insulated construction with 2 wire cord. 1-1/8 in. solid bit capacity, 3-1/2 in. thin wall core bit capacity in concrete or 4 in. capacity in masonry block. Bit protect the mechanism from overload. Variable speed 0-980 rpm, 0-4,200 bpm, 2.5 ft./lbs. blow energy Powerful 7.4 amp motor provides power for a hard-hitting 2.5 ft.-lbs. of energy per blow. 10 ft. cord. Three modes of operation rotation with hammering, hammer-only and rotation-only. This versatile tool can be used for drilling in steel, wood or concrete. Use rotation-only for drilling in steel and wood with optional chuck and adapter. Use rotation with hammering when drilling in concrete. Use hammer-only for light chipping work. Speed control switch allows operator controlled starts for less bit walk resulting in more accurate hole positioning. Lightweight, compact 14 in. length and well balanced design. Quick-change removable bit holder for optional 3-jaw chuck.

Flex BHW812VV 2-Speed Electronic Wet Handled Core Drill, 0-3800 RPM, 13.0 Amps

The Flex BHW812VV is a 2-Speed Electronic Wet Handled Core Drill. The drill has 13 Amp motor and infinitely adjustable speeds of 0-3800 RPM. The wet core drill is designed for drilling in concrete, natural stone (without hammer action) for electric boxes, fireplace connections, junction boxes and conduits. It is also ideal for precision drilling when securing heavy-load anchors. The nonhammering core drilling method allows for precise and fast drilling even in reinforced concrete. The Flex five-fold VV electronic control gives consistent speed control, soft start with acceleration trigger, overload protection, temperature monitoring and speed pre-selection. It features two-gear transmission for speed-compatible working. The additional rotating auxiliary handle with stops prevents turning. Not for use on masonry or asphalt.Please note that the hose assembly is NOT included in the BHW812VV. The hose is sold separately.

Milwaukee 5378-20 1/2Inch Pistol Grip Dual Torque Hammer Drill

At 7.5 amps this heavy duty pistol grip Hammer-Drill can handle the toughest drilling of 1/2 inch holes in concrete1/2 in. capacity, 7.5 amp motorTrigger speed control in two ranges 0-1350 rpm, 0-22,000 bpm & 0-2500 rpm, 0-40,000 bpm, reversingSelf-stop brush system 10 ft. fixed cordTwo modes of operation Rotation with hammering and rotation only.Dual range speed control allows the operator to choose higher speed with lower torque or slower speed and more torque depending on the size and type of the fastener or bit and the material being drilledEquipped with a removable side handle, the side handle also assists in setting the depth rod for pre-set hole drillingUse for drilling in wood, with Flat Boring Bits, Hole Saws, Auger Bits, and Selfeed Bits. It can also be used to drill in steel with Twist Bits and in concrete with Percussion Bits.Capacities 1/2 steel, 3/4 / 3/8 concrete, 1-3/4 selfeed bit

Milwaukee 5387-20 1/2-Inch Magnum Dual-Speed Hammer Drill

At 8.5 amps this heavy duty pistol grip 5387-20 Hammer-Drill can handle the toughest drilling of 3/4 inch holes in concrete. With dual range speed control, the operator can choose more power to speed for the toughest applications or more speed and less torque for lighter applications. Equipped with a metal gear case this tool can withstand the daily jobsite abuse. The removable side handle also assists in setting the depth rod for pre-set hole drilling. Use for drilling in wood with Flat Boring Bits, Hole Saws, Auger Bits, and Selfeed Bits (sold separately). It can also be used to drill in steel with Twist Bits and in concrete with Percussion Bits (both sold separately).

DeWalt DW4716 Industrial 12-Inch Dry Cutting Segmented Diamond Blade

The DeWalt DW4716 12-Inch Segmented Rim Industrial Dry Cut Diamond Blade's advanced diamond matrix provides long life (350 times longer than abrasive blades) and enhanced material removal for cleaner, safer cuts. Built with a segmented rim, this blade is designed to cut concrete, reinforced concrete, stone, granite, brick and tile, and it cuts faster and easier with less power requirements than most circular blades. For increased productivity, this blade delivers maximum strength in deep cuts and a straight, constant depth of cut, eliminating the need for multiple blade changes. The large diamond segments are augmented with cobalt, making it an ideal cutting solution for various product applications. This blade is designed with an 12-inch diameter with a 1-inch arbor.

Flex LW1509 4-1/2Inch High Speed Wet Angle Grinder, 10000 RPM, 7.8 Amps

The Flex LW1509 is a 4-1/2 High Speed Wet Angle Grinder. The compact 4-1/2 grinder is designed for maximum material removal of concrete or natural stone. With its 10000 RPM and 7.8 Amp motor, it is the fastest wet grinder in the market. It is intended for all heavy-duty stone grinding applications like bulk material removal, edge breaking, coarse grinding of uneven surfaces and polish preparation work.

concrete lorry being loaded by sam bateman

Couldn't find Concrete Mixershere? Are you looking for something else? Search our partner sites:

            Concrete Mixers