Channellock Tools                                                                                                                                                                      

Channellock Tools tools and information

Find Channellock Tools at best prices and buy!

Channellock 88 6-in-1 Rescue Tool

The Channellock 88 is a 6-in-1 Rescue Tool. Its hardened steel punch shatters safety glass. Its aggressive cross-hatch teeth twist and pull anything that gets in your way. Laser heat-treated cutting edges cut wires and cables easily. Its pry-bar quickly pries open windows and doors. It has a slot for shutting off standard gas safety valves. The spanner wrench tightens and loosens hose couplings.

Channellock® 804N 4Inch Adjustable Wrench

4 length, 1-5/16 head width Black phosphated finished handle Measurement scales (in. on front mm on reverse) for sizing nuts, pipe and tube diameters Perfectly parallel jaw surfaces grip safely and reduce possibility of damage Non protruding jaw with thinner jaw profile for use in confined spaces Ergonomic wide handle for comfortable grip Exceeds ASME B 107.8 M, B.S. 6333 and DIN 31117 standards Distinctive Channellock® blue comfort grips 100% guaranteed against breakage and failure

Channellock® 338 8Inch Cutting Plier Lap Joint

8 length, 25/32 cutting length, 25/32 jaw length Precision made of fine polished, high carbon drop forged steel Perfectly mated cutter, heat treated to hold its edge High leverage, heavy duty construction Distinctive Channellock® blue comfort grips 100% guaranteed against breakage and failure

Channellock® 357 7Inch Cutting Plier with End Cutter

7 length, 11/32 jaw length Precision made of fine polished, high carbon drop forged steel Perfectly mated cutter, heat treated to hold its edge Distinctive Channellock® blue comfort grips 100% guaranteed against breakage and failure

Channellock GL-12 12Inch Tongue and Groove Pliers with Griplock

12 long, 27/32 jaw length, 2-7/8 capacity in jawErgonomically designed offset head for greater leverageSpecial jaw design accommodates many shapesPatented PermaLock ® fastener eliminates nut and bolt failureDistinctive Channellock ® blue comfort grips100% guaranteed against breakage and failure

Channellock® 908 8-1/2Inch Crimp Strip Wiring Tool

8-1/2 length, 7/32 cutting length Crimps both insulated and non-insulated connections Precision holes for wire stripping Scissor-type blades are precision ground and heat treatedto hold their edge Cuts machine bolts without damaging threads Strips AWG wire sizes 10, 12, 14, 16, 18, 20 and 22 Strips mm wire sizes .80, 1.0, 1.3, 1.6, 2.0, 2.6 Distinctive Channellock® blue comfort grips 100% guaranteed against breakage and failure

Channellock® 369 9Inch Rounded Nose Linemen's Pliers

9-1/2 length, 47/64 cutting length, 1-17/32 jaw length Precision made of fine polished, high carbon drop forged steel Perfectly mated cutter, heat treated to hold its edge High leverage design, useful crushing area Distinctive Channellock® blue comfort grips 100% guaranteed against breakage and failure

Channellock® 480 20-1/4Inch Tongue and Groove Plier - BigAzz

20-1/4 length, 5 1/2 capacity Big as the job. Big as you need Patented undercut tongue and groove design assures, no slip jaw action Reinforcing edge minimizes stress breakage Right angle teeth grip in all directions for maximum bite and minimum wear PermaLock® fastener eliminates nut and bolt failures Distinctive Channellock® blue comfort grips 100% guaranteed against breakage and failure

Channellock® 430 10Inch Tongue and Groove Plier

10 length, 1-3/8 jaw length Patented undercut tongue and groove design assures, no slip jaw action Reinforcing edge minimizes stress breakage Right angle teeth grip in all directions for maximum bite and minimum wear PermaLock® fastener eliminates nut and bolt failures Distinctive Channellock® blue comfort grips 100% guaranteed against breakage and failure

Channellock® 424 4-1/2Inch Tongue and Groove Plier

4-1/2 length, 13/32 jaw length Patented undercut tongue and groove design assures, no slip jaw action Reinforcing edge minimizes stress breakage Right angle teeth grip in all directions for maximum bite and minimum wear PermaLock® fastener eliminates nut and bolt failures Distinctive Channellock® blue comfort grips 100% guaranteed against breakage and failure

Channellock® 909 THE CRIMPER Crimp and Cut Tool

9-3/4 length, 17/32 cutting length, 1-5/32 jaw length Precision crimping dies and cutters, slim nose shape for tight places Designed for crimping of both insulated/non-insulatedsolderless connections and terminals on 10 to 22 AWG wire Precision made of fine polished high carbon drop-forged steel Perfectly mated cutters, scientifically heat treated to hold their edge Distinctive Channellock® blue comfort grips 100% guaranteed against breakage and failure

Channellock® 420 9-1/2Inch Tongue/Groove Plier Smooth Jaw

9-1/2 length, 1-1/8 jaw length Patented undercut tongue and groove design assures, no slip jaw action Reinforcing edge minimizes stress breakage Right angle teeth grip in all directions for maximum bite and minimum wear PermaLock® fastener eliminates nut and bolt failures Distinctive Channellock® blue comfort grips 100% guaranteed against breakage and failure

Channellock® 422 9-1/2Inch Tongue and Groove Plier V Jaw

9-1/2 length, 1-1/8 jaw length V jaw design for use on round stock and tubing Patented undercut tongue and groove design assures, no slip jaw action Reinforcing edge minimizes stress breakage Right angle teeth grip in all directions for maximum bite and minimum wear PermaLock® fastener eliminates nut and bolt failures Distinctive Channellock® blue comfort grips 100% guaranteed against breakage and failure

Channellock® 442 12Inch Tongue and Groove Plier V Jaw

12 length, 1-1/2 jaw length V jaw design for use on round stock and tubing Patented undercut tongue and groove design assures, no slip jaw action Reinforcing edge minimizes stress breakage Right angle teeth grip in all directions for maximum bite and minimum wear PermaLock® fastener eliminates nut and bolt failures Distinctive Channellock® blue comfort grips 100% guaranteed against breakage and failure

Channellock 909CB Code Blue 9-1/2 in. Crimping & Cutting Tool***

-Polished high carbon drop forged steel.-Electronic coating to prevent rusting.-Laser-hardened cutting edges provide longer life and greater ease of cut.-A Santoprene core with TPR-rubber overmold composites for durabitlty, comfort and a secure grip.-New Code Blue designation on each of the pliers makes it easier than ever to choose the right tool for the job.

Denver Tools 502 150mm Air Hammer

The Denver Tools 502 is a 150mm Air Hammer which comes with 4 chisels.

Denver Tools 301 Jitterburg Sander

The Denver Tools 301 is a pneumatic Jitterburg Sander. This traditional style jitterbug sander with metal construction features a rubber grip and locking clamps to give you a good grip on both the tool and the sandpaper. This sander can be used on many materials including paint, metal and fiberglass.

Denver Tools 816A Air Angle Die Grinder

The Denver Tools 816A is a Air Angle Die Grinder. The angled head provides access to hard to reach places.

Denver Tools 653A 3/8-Inch In-line Air Drill

The Denver Tools 653A is a 3/8-Inch In-line Air Drill with variable speed. This small drill makes drilling in tight spaces easy.

Denver Tools SC02 1/4-Inch Swivel Connector

The Denver Tools SC02 is a 1/4-Inch Swivel Connector. This connector has a 360 swivel to prevent the air hose from kinking.

Denver Tools 93486 Mini Grease Gun

The Denver Tools 93486 is a Mini Grease Gun. This small, one-hand operated grease gun is perfect for greasing in tight spaces.

Denver Tools RM016 16 oz Rubber Mallet

The Denver Tools RM016 is a 16 oz Rubber Mallet. This mallet features a double-faced rubber head with a rubber gripped handle.

Denver Tools 120019 Brad Nailer

The Denver Tools 120021 Brad Nailer drives 18 gauge brad nails from 15mm to 50mm in length. A die cast aluminum body makes this nailer strong and light-weight while a rubber comfort grip handle provides improved control and comfort even during extended use. A touch-strike security system increases safety for the operator and a new 2 spring magizine pushes the nails smoothly. This nailer is ideal for door and window trims, decorative trim, cabinet work, finish paneling, frames and flooring.

Denver Tools 95439 Air Control Unit

The Denver Tools 95439 is an Air Control Unit. This air control unit consists of an air filter, air regulator and an oiler. It helps prevent costly damage to your air tools caused by rust, scale and moisture. It provides clean, dry, regulated air over a wide range of air flows. It is easy to install and maintain.

Denver Tools DBH24 24-Ounce Dead Blow Hammer

The Denver Tools DBH24 is a 24-ounce dead blow hammer. This steel shot filled, bright orange dead blow hammer is an essential part of anyone's toolbox.

Denver Tools RBC012 12-Inch Ratchet Bar Clamp

The Denver Tools RBC012 is a 12-Inch Ratchet Bar Clamp. It is a general purpose clamp that can be used on a variety of different tasks around the jobsite and the home.

Denver Tools 650 3/8-Inch Keyless Air Drill

The Denver Tools 650 is a 3/8-Inch Keyless Air Drill with an easily accessible forward/reverse switch making it easy to use with one hand.

Denver Tools ABG2 Air Blow Gun

The Denver Tools ABG2 is an Air Blow Gun featuring a comfortable vinyl coated control lever and durable chrome plated zince cast body.

Denver Tools AR2 Brass Air Regulator with Gauge

The Denver Tools AR2 is a Brass Air Regulator with Gauge. This regulator and guage allow you to monitor and control the air flow and pressure of your compressor.

Denver Tools 703A 3/8-Inch Driver Air Ratchet Wrench

The Denver Tools 703A is a 3/8-Inch Driver Air Ratchet Wrench.

Denver Tools DHTCZ-1 Zine Dual Head Tire Chuck

The Denver Tools DHTCZ-1 is a Zine Dual Head Tire Chuck for inflating tires.

Denver Tools 113 Air Body Saw (Front Exhaust)

The Denver Tools 113 is a Air Body Saw with Front Exhaust.

Denver Tools 811B 1/4-Inch Air Die Grinder

The Denver Tools 811B is a 1/4-Inch Air Die Grinder. This powerful air die grinder is compact and lightweight making it easy to use for most grinding, deburring and polishing applications.

Denver Tools 93703 3 Piece Ratchet Set

The Denver Tools 93703 is a 3 Piece Ratchet Set with 1/4-Inch, 3/8-Inch and 1/2-Inch drives. Each ratchet wrench is 8-Inches long and features a non-slip cushion grip for better grip and comfort.

Denver Tools 94346 Mini Air Line Filter

The Denver Tools 94346 is a Mini Air Line Filter. This 40 micron particle filter can operate at up to 135 PSI and 140 degrees Fahrenheit. The reservoir of this filter is made of durable polycarbonate and features a push style drain.

Denver Tools TC1 Air Brass Tire Chuck

The Denver Tools TC1 is a Air Brass Tire Chuck. This solid brass air chuck has a standard 1/4-Inch NPT fitting and can be used to inflate various types of tires.

Denver Tools ABK2 Professional Air Brush Kit

The Denver Tools ABK2 is a Professional Air Brush Kit. This kit includes everything needed for painting model cars, trains and art detail projects, stenciling, stippling, base coats and much more.

Denver Tools QC1 5-Piece Brass Quick Coupler Set

The Denver Tools QC1 is a 5-piece set of quick couplers.  These durable brass couplers allow you to easily and quickly connect your air tools to an air hose.

Denver Tools 280 Air In-Line Sander

The Denver Tools 280 is an Air In-Line Sander. This in-line sander features a conveinent push trigger on the handle so you don't have to take your hands off the tool to flip a switch. There is also a standard knob in the front of the sander for two handed operation, giving you better control over the movement of the sander.

Denver Tools 417002 3/8-Inch Electric Angle Drill

The Denver Tools 417002 is a 3/8-Inch Electric Angle Drill. This reversible drill features an easy to operate pull on/off paddle switch and a locking mechanism for continuous rotation. The ergonomic design and 55 degree angled chuck this drill easy to use in confined working areas.

Denver Tools 19212810 1/2-Inch Electric Impact Wrench

The Denver Tools 12810 is a 1/2-Inch Heavy Duty Industrial Electric Impact Wrench. The 19212810 Electric Impact Wrench has a reversiable 7.5amp moter and rugged die cast aluminum gear housing. A rocker trigger allows for easy one-hand operation.

Denver Tools 610003 6 Ton Hydraulic Bottle Jack

The Denver Tools 610003 is a 6 Ton Hydraulic Bottle Jack. This compact jack is durable and easy to use.

Denver Tools 610004 8 Ton Hydraulic Bottle Jack

The Denver Tools 610004 is a 8 Ton Hydraulic Bottle Jack. This compact jack is durable and easy to use.

Denver Tools 610002 4 Ton Hydraulic Bottle Jack

The Denver Tools 610002 is a 4 Ton Hydraulic Bottle Jack. This compact jack is durable and easy to use.

Denver Tools 610001 2 Ton Hydraulic Bottle Jack

The Denver Tools 610001 is a 2 Ton Hydraulic Bottle Jack. This compact jack is durable and easy to use.

Denver Tools MSS10 5 Piece 1/8-Inch Die Grinding Stone Set

The Denver Tools MSS10 is a 5 Piece 1/8-Inch Die Grinding Stone Set with 5 assorted mounted grinding stones.

Denver Tools MSS101 5 Piece 1/4-Inch Die Grinding Stone Set

The Denver Tools MSS101 is a 5 Piece 1/4-Inch Die Grinding Stone Set with 5 assorted mounted grinding stones.

Spring Tools IPTS108 Impact Driver Set

Spring Tools IPTS108 is an Impact Driver Set. Combination impact tool and screwdriver for re-coining damaged, corroded or rusty fastener heads, and removing sticky, unmovable rusted fasteners or corroded threads. Pull back the ball holding the high tension spring, striking the fastener head, causing up to 5,000 lbs of impact on the fastener head - then use as screwdriver to remove fastener.

Delta 50-274 Mobile Base for Delta Tools

The Delta 50-274 is a mobile base for delta tools. Delta mobile base provides stationary machines with increased mobility for positioning them at any place, whether its across the shop or out-of-the-way for convenient storage. Delta mobile bases are made of heavy-gage steel and feature a foot-operated control lever that raises and lowers the base for easy movement and positioning.

Denver Tools 613002 2 Ton Engine Crane

The Denver Tools 613002 is a 2 Ton Engine Crane. This engine crane has four settings for half ton, full ton, one and a half ton and two ton loads and features a hydraulic action pump for easy lifting. The legs and easily fold up into the body for easy storage and four caster wheels are attached to the bottom of the main body so it can easily be rolled away.

West Marine Tool Sets

Couldn't find Channellock Toolshere? Are you looking for something else? Search our partner sites:

                                                                                    Channellock Tools