Toolrr - Bostitch Tools

Search By Brand / Bostitch Tools

Bostitch Framing Nailers Bostitch Staplers Bostitch Brad Nailers Bostitch Finish Nailers Bostitch Flooring Nailers/Staplers Bostitch Combo Kits Bostitch Roofing Nailers Bostitch Compressors Bostitch Metal Connector Nailers Bostitch Nails & Accessories Bostitch Palm Nailers Bostitch Pin Nailers Bostitch Stapler Accessories Bostitch ProzHoze Bostitch Reconditioned Tools All Bostitch

Bostitch Tools tools and information

Find Bostitch Tools at best prices and buy!

Bostitch CPACK3 Factory Reconditioned Nailer, Stapler, and Compressor Combo Kit

The Bostitch CPACK3 is a factory reconditioned 3-Tool Finish & Trim Combo Kit that includes pneumatic tools such as a finish nailer, a brad nailer, a finish stapler, and an air compressor. The kit also includes an air hose, and canvas tool bag.The compressor in the Bostitch CPACK3 has heavy-duty motor with 2HP power at the peak, and otherwise smoothly works at 1.5 HP, delivering 3.4 CFM @ 40 PSI and 2.1 CFM @ 90 PSI and maximum 135 PSI. It has a tank capacity of 6 gallons and oil-free pump that requires no maintenance.The 16-gauge straight finish nailer can drive 1 ? 2-1/2 nails into toughest material. Moreover, it has a fast release nose to reduce downtime in case of jams. The 18-gauge brad nailer is designed to drive brads varying from 5/8 to 1-1/4. The narrow crown stapler is an 18-gauge tool that can drive 7/32 crown SX staples from ½ to 1. All three tools feature tool-free adjustable exhaust to direct the air away from the user. The non-mar tip protects the surface of the material. The adjustable depth guide enables the user to easily set the nail depth as required by the application. The housing of the tool in the Bostitch CPACK3 is made from aluminum, which is a lightweight and durable material.

Bostitch BA-W9 3/8InchHx1InchW Corrugated/Mitre Fastener

Bostitch BA-W9 3/8Hx1W Corrugated/Mitre Fastener

Bostitch BA-S114P90 9/16Inch Length 18-Gauge Headless Pin Nail

Bostitch 9/16 Length 18-Gauge Headless Pin Nail

Bostitch N86S-1 Factory Reconditioned Angle Nailer

-The Stanley-Bostitch N86S-1 Factory Reconditioned Nailer is a precision-built tool. Designed for high speed, volume nailing. These stick nailers will deliever efficient, dependable service when used correctly and with care.

Bostitch F21PL Factory Reconditioned 2Inch - 3-1/2Inch Industrial Stick Framing Nailer, 80 - 120 PSI, 21°

Bostitch RN46-1 Factory Reconditioned 1/4Inch Coil Roofing Nailer, 70-120 PSI

The Bostitch RN46-1, a factory reconditioned coil roofing nailer, is a durable power nailer that features a damage resistant body. Its aggressive wear guards and skid pads protects this heavy-duty nailer from any job site damages. Its zero lockout features ensure that the tool gets locked once the last nail is gunned, thus preventing dry run. This aids in understanding when the magazine needs to be reloaded. The carbide inserted nosepiece adds to the durability of this nailer making it last longer than its competitors. The quick-set adjustable depth guide, lets the user set the depth of a nail, when shot, as per the requirement. To address productive time utilization for professionals, the Bostitch RN46-1 features a unique single-action side load canister. This reduces the loading time of the magazine; With a 410in-lbs torque power this tool allows effortless gunning of nails on most of the surface. Moreover, the adjustable shingle guide incorporated in the Bostitch RN46-1, enables a user to quickly space the shingles at the required distance. This coil roofing nailer is an ideal tool for composition roofing, vapor barrier installation, insulation board, vinyl siding, and fiber cement siding.

Bostitch PN100K Impact Nailer Kit

Ideal for driving common bulk nails in confined areas and for nailing of metal connectors and joist hangersMagnetic nose with recessed nail slot holds nails stable for accurate fastener placementHardened steel nose for extreme durability

Bostitch MFN200 Factory Reconditioned 2-Inch Cleat Manual Flooring Cleat Nailer

Ready to use straight out of the box, Bostitch MFN200 Factory Reconditioned 2 Cleat Manual Flooring Cleat Nailer, comes along with a rubber mallet. Simply unpack, load, and strike to nail down and construct stable flooring. Ideal for DIY as well as professional installer this power cleat nailer drives 1 ½ to 2 inches nail with minimal effort. Gun it on hardwood or engineered floors and set the tongue-and-groove joint right for once and for all. The long reach handle of this cleat nailer enhances the comfort of use besides adding to the control. You need not bend every time to strike this nailer. The sturdy aluminum construction makes Bostitch MFN200 endure jobsite abuse. Use it for yourself or let your friends borrow; rest assured this tool will be with you for years. Being a non-pneumatic tool it assures a jam-free operation and lets you smoothly nail an L shaped serrated nail at every strike. More over the rubber bumper prevents the flooring from any sort of damage leaving it neat and spotless. With a magazine capacity of 200 cleats you are freed from the effort of frequent reloading. The 9.5 lbs Cleat Nailer is lightweight, can be easily ported at jobsite and stably drives a nail through inch hardwood flooring.

Bostitch BT200K-2 Factory Reconditioned 5/8Inch to 2Inch Oil-Free Brad Nailer Kit, 18 Gauge

The Bostitch BT200K-2 is a Factory Reconditioned 18 Gauge 5/8 to 2 Oil-Free Brad Nailer Kit. This lightweight tool has magnesium housing for jobsite durability. The oil-free operation prevents stains on work piece. It has ultra-quiet rear exhaust and open nose design for easy jam clearing.

Bostitch MCN150 1-1/2Inch STRAPSHOT Metal Connector Nailer, 80 - 120 PSI, 29 Nails

The Bostitch MCN150 is a 1-1/2 STRAPSHOT Metal Connector Nailer. It has an exposed nail tip which places fastener point directly into connector holes for a faster, more precise application. The compact design fits easily into hard to reach spaces. In-line magazine offers improved balance for added maneuverability.

Bostitch PRO-38REPAIR 3/8Inch Prozhoze Repair Kit

-Compression hose mending kit for 3/8" Prozhoze.

Bostitch RHS8D113HDG Galvanized Diamond Point Nail

-Stick Framing Nails 21 Degree-Plastic Collated Smooth Shank-Hot Dipped- Round Head Boxed-Lgth X Dia. Inches=2-3/8 X .113-Box of 5000

Bostitch BA-S125P50 1Inch 18 Gauge Headless Pins

BA-S125P50 18 Gauge headless pins fit BA-T520 Decorative Molding/Fine Trim Pinner

Bostitch N62FNK-2 Factory Reconditioned 15 Gauge Industrial Oil-Free Angled Finish Nailer Kit, 120 PSI

The Bostitch N62FNK-2 is a Factory Reconditioned Industrial 15 Gauge Oil-Free Angled Finish Nailer Kit. The nailer has an oil-free engine which requires no lubrication. Hence it leaves no oil stains on work. It has a tool-free removable magazine for fast cleaning and jam clearing. It also has an adjustable depth control for quick countersinking adjustments and angled magazine for maximum maneuverability.

Bostitch MIIIFS Factory Reconditioned 1-1/2 Inch to 2 Inch Flooring Stapler Kit, 70-90 PSI

The Bostitch MIIIFS is a Factory Reconditioned 1-1/2" to 2" Flooring Stapler Kit. The compact, mallet-actuated air stapler automatically positions and drives staples for rapid installation of hardwood flooring. It secures the flooring at the proper angle and penetration without the danger of hammer marring. By simply resting the nose of the machine squarely against the work, the direction and angle of the staple is automatically aligned. The stapler is easily adjusted to handle different flooring thickness or tongue positions. It has an aluminum body for job site durability.

Bostitch SX150K-1 Factory Reconditioned 18 Gauge Narrow Crown Stapler

-Lightweight magnesium housing for jobsite durability-Oil-free operation prevents stains on workpiece-Ultra quiet rear exhaust-Open nose design for easy jam clearing-Adjustable depth control for quick countersinking adjustments-Over molded comfort grip-Narrow nose for accurate fastener placement into hard-to-reach areas-Fastener range 1/2 to 1 1/2

Bostitch RHMC13125 2-1/2InchX.131 Round Head Plastic Coallated Metal Connector Nails

-Full Round Head-Bend yield = 100,000 PSI-For Metal Connector Applications-Good for use in all Pressure Treated Lumber

Bostitch RHMC14825 2-1/2InchX.148 Round Head Plastic Coallated Metal Connector Nails

-Full Round Head-Bend yield = 100,000 PSI-For Metal Connector Applications-Good for use in all Pressure Treated Lumber

Denver Tools 502 150mm Air Hammer

The Denver Tools 502 is a 150mm Air Hammer which comes with 4 chisels.

Denver Tools 301 Jitterburg Sander

The Denver Tools 301 is a pneumatic Jitterburg Sander. This traditional style jitterbug sander with metal construction features a rubber grip and locking clamps to give you a good grip on both the tool and the sandpaper. This sander can be used on many materials including paint, metal and fiberglass.

Denver Tools 816A Air Angle Die Grinder

The Denver Tools 816A is a Air Angle Die Grinder. The angled head provides access to hard to reach places.

Denver Tools 653A 3/8-Inch In-line Air Drill

The Denver Tools 653A is a 3/8-Inch In-line Air Drill with variable speed. This small drill makes drilling in tight spaces easy.

Denver Tools SC02 1/4-Inch Swivel Connector

The Denver Tools SC02 is a 1/4-Inch Swivel Connector. This connector has a 360 swivel to prevent the air hose from kinking.

Denver Tools 93486 Mini Grease Gun

The Denver Tools 93486 is a Mini Grease Gun. This small, one-hand operated grease gun is perfect for greasing in tight spaces.

Denver Tools RM016 16 oz Rubber Mallet

The Denver Tools RM016 is a 16 oz Rubber Mallet. This mallet features a double-faced rubber head with a rubber gripped handle.

Denver Tools 120019 Brad Nailer

The Denver Tools 120021 Brad Nailer drives 18 gauge brad nails from 15mm to 50mm in length. A die cast aluminum body makes this nailer strong and light-weight while a rubber comfort grip handle provides improved control and comfort even during extended use. A touch-strike security system increases safety for the operator and a new 2 spring magizine pushes the nails smoothly. This nailer is ideal for door and window trims, decorative trim, cabinet work, finish paneling, frames and flooring.

Denver Tools 95439 Air Control Unit

The Denver Tools 95439 is an Air Control Unit. This air control unit consists of an air filter, air regulator and an oiler. It helps prevent costly damage to your air tools caused by rust, scale and moisture. It provides clean, dry, regulated air over a wide range of air flows. It is easy to install and maintain.

Denver Tools DBH24 24-Ounce Dead Blow Hammer

The Denver Tools DBH24 is a 24-ounce dead blow hammer. This steel shot filled, bright orange dead blow hammer is an essential part of anyone's toolbox.

Denver Tools RBC012 12-Inch Ratchet Bar Clamp

The Denver Tools RBC012 is a 12-Inch Ratchet Bar Clamp. It is a general purpose clamp that can be used on a variety of different tasks around the jobsite and the home.

Denver Tools 650 3/8-Inch Keyless Air Drill

The Denver Tools 650 is a 3/8-Inch Keyless Air Drill with an easily accessible forward/reverse switch making it easy to use with one hand.

Denver Tools ABG2 Air Blow Gun

The Denver Tools ABG2 is an Air Blow Gun featuring a comfortable vinyl coated control lever and durable chrome plated zince cast body.

Denver Tools AR2 Brass Air Regulator with Gauge

The Denver Tools AR2 is a Brass Air Regulator with Gauge. This regulator and guage allow you to monitor and control the air flow and pressure of your compressor.

Denver Tools 703A 3/8-Inch Driver Air Ratchet Wrench

The Denver Tools 703A is a 3/8-Inch Driver Air Ratchet Wrench.

Denver Tools DHTCZ-1 Zine Dual Head Tire Chuck

The Denver Tools DHTCZ-1 is a Zine Dual Head Tire Chuck for inflating tires.

Denver Tools 113 Air Body Saw (Front Exhaust)

The Denver Tools 113 is a Air Body Saw with Front Exhaust.

Denver Tools 811B 1/4-Inch Air Die Grinder

The Denver Tools 811B is a 1/4-Inch Air Die Grinder. This powerful air die grinder is compact and lightweight making it easy to use for most grinding, deburring and polishing applications.

Denver Tools 93703 3 Piece Ratchet Set

The Denver Tools 93703 is a 3 Piece Ratchet Set with 1/4-Inch, 3/8-Inch and 1/2-Inch drives. Each ratchet wrench is 8-Inches long and features a non-slip cushion grip for better grip and comfort.

Denver Tools 94346 Mini Air Line Filter

The Denver Tools 94346 is a Mini Air Line Filter. This 40 micron particle filter can operate at up to 135 PSI and 140 degrees Fahrenheit. The reservoir of this filter is made of durable polycarbonate and features a push style drain.

Denver Tools TC1 Air Brass Tire Chuck

The Denver Tools TC1 is a Air Brass Tire Chuck. This solid brass air chuck has a standard 1/4-Inch NPT fitting and can be used to inflate various types of tires.

Denver Tools ABK2 Professional Air Brush Kit

The Denver Tools ABK2 is a Professional Air Brush Kit. This kit includes everything needed for painting model cars, trains and art detail projects, stenciling, stippling, base coats and much more.

Denver Tools QC1 5-Piece Brass Quick Coupler Set

The Denver Tools QC1 is a 5-piece set of quick couplers. These durable brass couplers allow you to easily and quickly connect your air tools to an air hose.

Denver Tools 280 Air In-Line Sander

The Denver Tools 280 is an Air In-Line Sander. This in-line sander features a conveinent push trigger on the handle so you don't have to take your hands off the tool to flip a switch. There is also a standard knob in the front of the sander for two handed operation, giving you better control over the movement of the sander.

Denver Tools 417002 3/8-Inch Electric Angle Drill

The Denver Tools 417002 is a 3/8-Inch Electric Angle Drill. This reversible drill features an easy to operate pull on/off paddle switch and a locking mechanism for continuous rotation. The ergonomic design and 55 degree angled chuck this drill easy to use in confined working areas.