Bosch Tools tools and information

Find Bosch Tools at best prices and buy!

Bosch BAT100 9.6V 2.0 Amp-Hour BLUECORE Battery

The Bosch BAT100 is a 9.6V 2.0 Amp-Hour BLUECORE Battery. The battery is fully compatible with all Bosch Cordless Tools. The BLUECORE cooling rods are placed between battery cells to absorb heat and protect battery from damage. Battery cells stay cooler during tool operation and charging. BLUECORE Battery can charge in 30 minutes compared to other batteries which can take up to 3 hours to charge when hot.

Bosch 83038 Deluxe Door & Jamb Hinge Template Kit

Transfers directly from jamb to door (or vice-versa) with hinges on either side of door No turning template end over endNo straight edges, measuring tools or calculations requiredWorks with or without the stops installedTemplate guide requiredUse the competitive brand template guide which matches the dimensions of the Bosch Template Guide No. RA1113

Bosch PS20-2A 12-Volt Max Lithium-Ion Pocket Driver with 2 Batteries

The Bosch PS20-2A is a 12-Volt Max Lithium-Ion Pocket Driver. Forty-percent lighter and 33-percent more productive than other ultra-compact drill/drivers, the Pocket Driver is small enough to fit into a tool belt pouch and lightweight and powerful enough to accomplish a majority of professional drill/driving tasks all day without fatigue. For carpenters, re modelers, electricians, woodworkers and more, the Pocket Driver is an invaluable complement to larger and heavier cordless drill/drivers. The 12-volt Max Pocket Driver measures only 6 by 6.5-inches, nearly half the size of stick drivers and other ultra-compact drill/drivers. Under 2 pounds (with battery), the Pocket Driver is also 40% lighter and comfortably fits into a tool belt pouch or back pocket, unlike the competition. The Pocket Driver can drive 100 3-inch screws per charge and drill holes up to 1/2-inch in diameter, more than enough to keep most professionals productive through the day. The variable speed trigger controls 0-400 rpm and over 80-inch/lbs. of torque. A 10+1 clutch system, similar to those of standard drill/drivers, offers 10 drive and one "Max" drill setting for better control. The tool's Clic-Change bit holder makes 1/4-inch hex shank bits changes quick and easy. And an LED light enhances visibility in dim working conditions, while a soft-grip handle makes the tool more comfortable for all day use. Litheon 12-volt Max tools, such as the Pocket Driver, were not possible before lithium-ion technology. In addition to larger more powerful 36-volt tools, Bosch recognized the opportunity to extend the inherent benefits of the new battery technology to innovate the lower end of the voltage spectrum with a never before seen ultra-compact, lightweight and powerful design.

Bosch 11248EVS Factory Reconditioned 1-9/16 inch 2-Mode Spline Combination Rotary Hammer, 170-340 RPM, 11.0 Amps

The Bosch 11248EVS is a Factory Reconditioned 1-9/16 inch 2-Mode Spline Combination Rotary Hammer. The tough spline drive combination hammer offers dual mode operation for hammering with or without rotation. It features a variable-speed 11 Amp motor that provides 170 to 340 RPM and 1700 to 3300 BPM. It delivers 6.2 ft-lbs of impact energy in regular operation and up to 7.4 ft-lbs in turbo mode. The tools constant response circuitry ensures a soft start and a constant speed under load. Bosch also equips the hammer with a vibration-reducing handle, which makes the tool easier to work with for extended periods of time. The combination hammer also includes an indicator light to let user know when preventative maintenance is required and a power light that indicates when the tool is plugged in and ready for use.

Bosch 1617EVSK 2-1/4 HP Variable Speed Fixed Base Router with Case, 8000-25000 RPM, 12.0 Amps

The 1617EVSK router includes a Deluxe Edge Guide. With an exclusive quick clamp, the 2 HP, 12 Amps router from Bosch gives fast set-up with constant motor-to-base tension. The electronic feedback circuitry maintains selected speed and provides a soft start. It also features a precision centering design that assures perfect bit centering for unmatched accuracy, a quick-change template guide that needs no tools and pre-drilled and tapped base that holes fit a variety of fixtures and accessories. The exclusive 180 motor housing turns for convenient switch and cord location.

Bosch PS20-2 Factory Reconditioned Lithium 10.8V Lithium-Ion Pocket Driver with 2 Batteries, 400 RPM

The Bosch PS20-2 is a Factory Reconditioned Lithium 10.8V Lithium-Ion Pocket Driver with 2 Batteries. The Pocket Driver is small enough to fit into a tool belt pouch and lightweight and powerful enough to accomplish a majority of professional drill/driving tasks all day without fatigue. The pocket driver can drive 100 3 inch screws per charge and drill holes up to 1/2 inch in diameter, more than enough to keep most professionals productive through the day. The variable speed trigger controls 0-400 RPM and over 80 in-lbs of torque. A 10+1 clutch system, similar to those of standard drill/drivers, offers 10 drive and one Max drill setting for better control. The tools Clic-Change bit holder makes 1/4 inch hex shank bits changes quick and easy.

Bosch TS1001 Fixed Base Table Saw Stand

The Bosch TS1001 is a fixed base table saw stand. It is a fixed steel stand for Bosch's 4000 10 inch worksite table saw stand.

Bosch HS2172 Ground Rod Driver

The Bosch HS2172 is a Ground Rod Driver. It drives ground rods and measures 15-1/2 inches long; inside diameter of 1 inch; inside depth of 3 inches.

Bosch HC4591 1-1/2 inch x 23 inch Spline Shank Bit

The Bosch HC4591 is a 1-1/2 inch x 23 inch Spline Shank Bit. Bosch spline rotary hammer bit is carbide tipped and fit Bosch as well as other spline hammers.

Bosch HC4540 7/8 inch x 16 inch Spline Shank Bit

The Bosch HC4540 is a 7/8 inch x 16 inch Spline Shank Bit. Bosch spline rotary hammer bit is carbide tipped and fit Bosch as well as other spline hammers.

Bosch TS1003 Left Side Support for Table saw Model 4000

The Bosch TS1003 Left Side Support Extension increases the width of the table to 52 inch when used with the Bosch 4000 10 inch Worksite Table Saw.

Bosch 52318 18V Jig Saw - Tool Only

The Bosch 52318 is a 18V Jig Saw - Tool Only. It is a bare tool, no battery/Charger included. The Bosch Jig Saw offers a One-Touch blade-change system for quick blade changes, ejecting hot or broken blades with the pull of a lever. The unit also features the patented Bosch blade-retention system, with an exclusive three-position grip that maintains secure blade position for precise cuts. The powerful Bosch-built motor includes magnesium gear housing and the large die-cast aluminum foot provides stable guidance and control.

Bosch TS1002 Rear Outfeed Support Extension for Table saw Model 4000

The Bosch TS1002 rear outfeed support extension increases the working depth upto 39-1/2 inch, when used with the Bosch 4000 10 inch worksite table saw. The extension is constructed from hard metal with aluminum mounts.

Bosch HS1914 SDS-Max Shank 18 inch Bull Point Chisel

The Bosch HS1914 is a SDS-Max Shank 18 inch Bull Point Chisel. It fits Bosch SDS-max hammers, competitive SDS-max driver hammers and Hiliti hammers using TE-Y and TE-FY shanks.

Bosch HS1913 SDS-Max Shank 12 inch Bull Point Chisel

The Bosch HS1913 is a SDS-Max Shank 12 inch Bull Point Chisel. It fits Bosch SDS-max hammers, competitive SDS-max driver hammers and Hiliti hammers using TE-Y and TE-FY shanks.

Bosch BAT607 14.4-Volt Litheon? SlimPack Battery

Up to 5 times longer cycle life than competitive Lithium-Ion batteriesFor use with all Bosch 14.4V Litheon? toolsUse only with Litheon 18V Litheon? Charger -- BC630

Bosch BAT614 14.4-Volt Litheon? FatPack Battery

Up to 5 times longer cycle life than competitive Lithium-Ion batteriesFor use with all Bosch 14.4V Litheon? toolsUse only with Litheon 18V Litheon? Charger -- BC630

Bosch BAT609 18-Volt Litheon? SlimPack Battery

Up to 5 times longer cycle life than competitive Lithium-Ion batteriesFor use with all Bosch 18V Litheon? toolsUse only with Litheon 18V Litheon? Charger -- BC630

Bosch BAT618 18-Volt 2.6-Ah Litheon? FatPack Battery

Up to 5 times longer cycle life than competitive Lithium-Ion batteriesFor use with all Bosch 18V Litheon? toolsUse only with Litheon 18V Litheon? Charger -- BC630

Bosch TS1005 Zero Clearance Insert for Table saw Model 4000

The Bosch TS1005 zero clearance insert for table saw model 4000 is basically used for precision cuts at 90. It reduces kerf clearance to thickness of blade.

Bosch HC4510 1/2 inch x 6 inch x 11 inch Spline Shank Rotary Hammer Drill Bit

The Bosch HC4510 is a 1/2 inch x 6 inch x 11 inch Spline Shank Rotary Hammer Drill Bit. The spline rotary hammer bit is carbide tipped and fit Bosch as well as other spline hammers.

Bosch PS50-2A 12v Litheon Multi-X Cordless Oscillating Tool Kit

The Bosch 12 Volt Cordless Multi-X Oscillating Tool is versatile and effective at multitasking and uses a fast side-to-side oscillating motion to take on a variety of projects, such as repairs, remodeling, or restoration work.

Bosch 1873-8 Factory Recondition 7 inch Angle Grinder, 8500 RPMS

The Bosch 1873-8 Factory Reconditioned 7 inch Angle Grinder with 8500 RPMS is tool-free adjustable guard for quick guard installation and adjustments. It features Rat Tail Handle.

Bosch T4-B Gravity-Rise Miter Saw Stand

Bosch expanded its patented and award-winning technology to develop and introduce the new Gravity-Rise T4B Portable Miter Saw Stand. Smart, durable and simple to use, professionals never need to worry about how to setup or carry their miter saw ever again. The T4B features the same Bosch-patented Gravity-Rise system as the industrys award winning TS2000 Gravity-Rise Table Saw Stand. Unlike other miter saw stands, the Bosch Gravity-Rise system is practically effortless and allows for rapid set-up and breakdown in seconds. With a simple turn of the release lever and the users guidance, the weight and balance smoothly raises the heavy-gauge steel and aluminum constructed stand and saw into working position. Set the leveling feet for uneven terrain and professionals are ready to get to work. Turn the same release lever again, and the entire stand folds into a push cart design, complete with 8-inch pneumatic wheels, perfect for transporting the saw over rough terrain from one location to the next. The T4B utilizes an aluminum support rail and special Universal Rapid-Release Tool Mounts designed to attach to the base of all Bosch and most competitors miter saws. These mounts allow any user to quickly attach or detach the saw to the stand. And rubber feet prevent scratches when placing the tool on a cabinet top or bench. The same support rails expand for 18-feet total material support, the highest among fully portable units. For users cutting long pieces of molding or flooring, this kind of support is priceless. Adjustable repetitive stops and table supports also allow the stand to adapt to varying applications and saws.

Bosch 36618-02 18-Volt Litheon Compact Tough Drill Driver

This 18V Litheon Compact Tough&trade Drill Driver from Bosch (36618-02) uses state-of-the-art Lithium-ion battery technology. When coupled with Bosch's proprietary ECP (Electronic Cell Protection) system Lithium-ion technology guarantees the optimal performance of tool and batteries even for tough work conditions. This drill driver gives you extraordinary power (500 in.-lbs. of torque and a high speed of 1,600 RPM) while the 20 position clutch gives you total control.

Bosch HC4021 WildBore 5/8 inch x 11 inch x 16 inch Spline Shank Rotary Hammer Drill Bit

The Bosch HC4021 is a WildBore 5/8 inch x 11 inch x 16 inch Spline Shank Rotary Hammer Drill Bit. The bit carbide tipped and fit Bosch as well as other spline hammers.

Bosch HC4020 WildBore 5/8 inch x 6 inch x 11 inch Spline Shank Rotary Hammer Drill Bit

The Bosch HC4020 is a WildBore 5/8 inch x 6 inch x 11 inch Spline Shank Rotary Hammer Drill Bit. The bit carbide tipped and fit Bosch as well as other spline hammers.

Bosch HC4030 WildBore 3/4 inch x 6 inch x 11 inch Spline Shank Rotary Hammer Drill Bit

The Bosch HC4030 is a WildBore 3/4 inch x 6 inch x 11 inch Spline Shank Rotary Hammer Drill Bit. The rotary hammer bit is carbide tipped and fit Bosch as well as other spline hammers.

Bosch HC2124 3/4 inch x 12 inch SDS-Plus Shank Bit - Carbide Tipped

The Bosch HC2124 is a 3/4 inch x 12 inch SDS-Plus Shank Bit - Carbide Tipped. Bosch SDS-plus rotary hammer bits feature a patent-pending 4-flute design which provides fast dust removal. The carbide-tipped drill bit heads are harder, tougher and more resistant to extreme loads.

Bosch HS1912 SDS-Max Shank 1 inch x 18 inch Flat Chisel

The Bosch HS1912 is a SDS-Max Shank 1 inch x 18 inch Flat Chisel. It fits Bosch SDS-max hammers, competitive SDS-max driver hammers and Hiliti hammers using TE-Y and TE-FY shanks.

Bosch HC2147 7/8 inch x 18 inch SDS-Plus Shank Bit - Carbide Tipped

The Bosch HC2147 is a 7/8 inch x 18 inch SDS-Plus Shank Bit - Carbide Tipped. Bosch SDS-plus rotary hammer bits feature a patent-pending 4-flute design which provides fast dust removal. The carbide-tipped drill bit heads are harder, tougher and more resistant to extreme loads.

Bosch HC2283 1-1/8 inch x 10 inch SDS-Plus Wild Bore Bit

The Bosch HC2283 is a 1-1/8 inch x 10 inch SDS-Plus Wild Bore Bit. Bosch SDS-plus rotary hammer bits feature a patent-pending 4-flute design which provides fast dust removal. The carbide-tipped drill bit heads are harder, tougher and more resistant to extreme loads.

Bosch HC2163 1 inch x 10 inch SDS-Plus Shank Bit - Carbide Tipped

The Bosch HC2163 is a 1 inch x 10 inch SDS-Plus Shank Bit - Carbide Tipped. Bosch SDS-plus rotary hammer bits feature a patent-pending 4-flute design which provides fast dust removal. The carbide-tipped drill bit heads are harder, tougher and more resistant to extreme loads.

Bosch 3365 Factory Reconditioned 3-1/4 Inch Power Planer with Edge Guide, 18000 RPM, 5.0 Amps

The Bosch 3365 Factory Reconditioned 3-1/4 Inch Power Planer With Edge Guide, eliminates uneven planning caused by misaligned blades. It features a convenient single-blade system which automatically positions blade at ideal cutting angle. It is equipped with Bosch Woodrazor micro grain carbide blades.

Bosch HC2122 3/4 inch x 8 inch SDS-Plus Shank Bit - Carbide Tipped

The Bosch HC2122 is a 3/4 inch x 8 inch SDS-Plus Shank Bit - Carbide Tipped. Bosch SDS-plus rotary hammer bits feature a patent-pending 4-flute design which provides fast dust removal. The carbide-tipped drill bit heads are harder, tougher and more resistant to extreme loads.

Bosch HC2287 1-1/8 inch x 18 inch SDS-Plus Wild Bore Bit

The Bosch HC2287 is a 1-1/8 inch x 18 inch SDS-Plus Wild Bore Bit. Bosch SDS-plus rotary hammer bits feature a patent-pending 4-flute design which provides fast dust removal. The carbide-tipped drill bit heads are harder, tougher and more resistant to extreme loads.

Bosch HS1915 2 inch x 12 inch SDS-Max Scraping Chisel

The Bosch HS1915 is a 2 inch x 12 inch SDS-Max Scraping Chisel. The chisel is used for scraping such as removing tile from a concrete floor.

Bosch BC230 30 Minute Dual Bay Battery Charger

The Bosch BC230 is a 30 Minute Dual Bay Battery Charger. A Microprocessor measures internal battery conditions, optimizes energy flow and maximizes battery charge capacity. It Charges 9.6V to 24V batteries. A new charging indicator with 2 LEDs is easy to read and provides instant charging status of the batteries.

Bosch 11335K 35 lbs Breaker Hammer, 15 Amps, 1300 BPM

The Bosch 11335K is a 35 lbs Breaker Hammer. It has shock absorbing top handle which reduces vibration by up to 40% vs the competition. It has impact force of 34 ft-lbs and powerful 1750 Watts motor hits up to 50% harder than its closest competitor.

Bosch 1297DK Factory Reconditioned 1/4 Sheet Finishing Sander Kit

The Bosch 1297DK is a Factory Reconditioned 1/4 Sheet Finishing Sander Kit. It has 2.0 Amp motor which delivers 12000 OPM ensures fast smooth results on all surfaces. It has rubberized paper clamps for firm, no-slip grip. It has flush sanding ability which sands close to vertical surfaces on three sides. It has Bosch microfiler dust canister with integrated paper filter It has optimal filtering system of fine dust which captures particles as small as a 1/2 micron. It has all ball bearing construction for long life and smooth operation.

Bosch HC5042 7/8 inch x 16 inch SDS Max Shank Wild Bore Bit

The Bosch HC5042 is a 7/8 inch x 16 inch SDS Max Shank Wild Bore Bit. Bosch carbide rotary hammer bit features tip that stay sharper longer and deliver more holes within their ANSI specification than competitors bits. Also, Bosch shafts wear at a much slower rate than most others and can take more abuse because of Boschs technologically advanced conditioning process.

Bosch HC5032 3/4 inch x 16 inch SDS Max Shank Wild Bore Bit

The Bosch HC5032 is a 3/4 inch x 16 inch SDS Max Shank Wild Bore Bit. Bosch carbide rotary hammer bit features tip that stay sharper longer and deliver more holes within their ANSI specification than competitors bits. Also, Bosch shafts wear at a much slower rate than most others and can take more abuse because of Boschs technologically advanced conditioning process.

Bosch HC5060 1-1/8 inch x 15 inch SDS Max Shank Wild Bore Bit

The Bosch HC5060 is a 1-1/8 inch x 15 inch SDS Max Shank Wild Bore Bit. Bosch carbide rotary hammer bit features tip that stay sharper longer and deliver more holes within their ANSI specification than competitors bits. Also, Bosch shafts wear at a much slower rate than most others and can take more abuse because of Boschs technologically advanced conditioning process.

Bosch HC5098 1-3/4 inch x 23 inch SDS Max Shank Wild Bore Bit

The Bosch HC5098 is a 1-3/4 inch x 23 inch SDS Max Shank Wild Bore Bit. Bosch carbide rotary hammer bit features tip that stay sharper longer and deliver more holes within their ANSI specification than competitors bits. Also, Bosch shafts wear at a much slower rate than most others and can take more abuse because of Boschs technologically advanced conditioning process.

Bosch HC5091 1-1/2 inch x 23 inch SDS Max Shank Wild Bore Bit

The Bosch HC5091 is a 1-1/2 inch x 23 inch SDS Max Shank Wild Bore Bit. Bosch carbide rotary hammer bit features tip that stay sharper longer and deliver more holes within their ANSI specification than competitors bits. Also, Bosch shafts wear at a much slower rate than most others and can take more abuse because of Boschs technologically advanced conditioning process.

Bosch HC5052 1 inch x 16 inch SDS Max Shank Wild Bore Bit

The Bosch HC5052 1 inch x 16 inch SDS Max Shank Wild Bore Bit. Bosch carbide rotary hammer bit features tip that stay sharper longer and deliver more holes within their ANSI specification than competitors bits. Also, Bosch shafts wear at a much slower rate than most others and can take more abuse because of Boschs technologically advanced conditioning process.

Bosch HC5022 5/8 inch x 16 inch SDS Max Shank Wild Bore Bit

The Bosch HC5022 is a 5/8 inch x 16 inch SDS Max Shank Wild Bore Bit. Bosch carbide rotary hammer bit features tip that stay sharper longer and deliver more holes within their ANSI specification than competitors bits. Also, Bosch shafts wear at a much slower rate than most others and can take more abuse because of Boschs technologically advanced conditioning process.

Bosch HC5099 2 inch x 23 inch SDS Max Shank Wild Bore Bit

The Bosch HC5099 2 inch x 23 inch SDS Max Shank Wild Bore Bit. Bosch carbide rotary hammer bit features tip that stay sharper longer and deliver more holes within their ANSI specification than competitors bits. Also, Bosch shafts wear at a much slower rate than most others and can take more abuse because of Boschs technologically advanced conditioning process.

Bosch 4100-09 10 inch Worksite Table Saw with Gravity-Rise Stand

The Bosch 4100-09 is an easy to assemble 10-inch Worksite Table Saw with a Modular Smart Guard system that includes blade guard, riving knife and anti-kickback pawls. Each of these components can be independently added or removed depending upon the task requirement. The blade guard boasts of new split guard mechanism that provides protection besides keeping the line of sight free. The riving knife prevents the material from pinching the blade and offers positions for full upright, splitting and non-thru cutting.The saw table has a Bosch-exclusive Square Lock Rip Fence with auxiliary fence slots, which glides along the rail at a fingers touch and locks into place for solid and consistent cutting performance while the magnifying glass on the fence makes subtle adjustments easy. The Bosch 4100-09 Saw Table has a Gravity-Rise stand that allows an easy set-up for heavy-duty construction while its 8 pneumatic wheels allow easy portability. The Bosch 4100-09 features Constant Response Circuitry with Soft Start, which reduces the start-up torque and maintains consistent speed even load increases. The saw has 29 x 21.5 Machined Aluminum Tabletop that facilitates the handling of wider stock for greater ripping capacity. Finally the Bosch 4100-09 has a blade height adjustment wheel, a single-point bevel movement for consistent accuracy, t-slot miter system and enhanced dust collection.

Bosch HC4040 WildBore 7/8 inch x 11 inch x 16 inch Spline Shank Rotary Hammer Drill Bit

The Bosch HC4040 is a WildBore 7/8 inch x 11 inch x 16 inch Spline Shank Rotary Hammer Drill Bit. The spline rotary hammer bit is carbide tipped and fit Bosch as well as other spline hammers.

BOSCH Multi-Cutter GOP 10.8V-Li

Couldn't find Bosch Toolshere? Are you looking for something else? Search our partner sites: