Altraco Tools                                                                                                                                                                                              

Altraco Tools tools and information

Find Altraco Tools at best prices and buy!

Altraco MM-02EC Outside Micrometers

Satin chrome finish frame with insulating sleeves Carbide tipped faces Ratchet stop ? lock lever Clear graduation on satin chrome finish thimble Supplied with calibrating gage Each piece fitted in a box with instructions and zero adjusting key Specifications Reading .0001, Range 1-2

Altraco MM-01EC Outside Micrometers

Satin chrome finish frame with insulating sleeves Carbide tipped faces Ratchet stop ? lock lever Clear graduation on satin chrome finish thimble Each piece fitted in a box with instructions and zero adjusting key Specifications Reading .0001, Range 0-1

Altraco MSE-12 Digital Combination Square

Precision cast iron square with level vial and hardened scribe toolStainless steel hardened bladesGraduated blade 1/32 one side, metric 0.01 mm on other sideExtremely accurate for layoutsCan measure depths or shoulders faster than a depth micrometer without changing stems, can reach from 0.0 to 9.3 inches in seconds.Can be used with or without side accessory blade.Accessory blade is useful to reach across gaps or extend out from edges, also can be used to hook behind a corner.Remember to reset zero when using accessory scaleFloating zeroFitted in plastic box

Altraco MI-103 Dial Indicator, Face White

Shock Proof AGD group 2Dial graduated 0-100 with continuous and balance readingLug on center with hole adjusting every 90Replaceable tip and top screw with standard 4-48NF threadEach piece in polystyrene foam in a carton boxRotatable bezel with clamps with revolution counterReading to .001Specifications Face White, Range 1.0

Altraco MIB-207 Magnetic Base, Flexible Arm

Powerful 130 lb pullTwo magnetic mounting surfaces bottom and backUniversal dovetail clamp for Dial Test IndicatorsCentered V-magnet for strongest grip on round or flat surfaceSwivel adapter to mount all AGD Dial Indicators with lug backsOn / Off switchCenter rod ½ diameter X 7 high

Altraco MIB-10 Magnetic Base, Fine Adjustment

Powerful 130 lb pullTwo magnetic mounting surfaces bottom and backUniversal dovetail clamp for Dial Test IndicatorsCentered V-magnet for strongest grip on round or flat surfaceSwivel adapter to mount all AGD Dial Indicators with lug backsOn / Off switchCenter rod ½ diameter X 7 high

Altraco MI-103B Dial Indicator, Face Black

Shock Proof AGD group 2Dial graduated 0-100 with continuous and balance readingLug on center with hole adjusting every 90Replaceable tip and top screw with standard 4-48NF threadEach piece in polystyrene foam in a carton boxRotatable bezel with clamps with revolution counterReading to .001Specifications Face Black, Range 1.0

Altraco MIB-200 Magnetic Base, Universal Base

Powerful 130 lb pullTwo magnetic mounting surfaces bottom and backUniversal dovetail clamp for Dial Test IndicatorsCentered V-magnet for strongest grip on round or flat surfaceSwivel adapter to mount all AGD Dial Indicators with lug backsOn / Off switchCenter rod ½ diameter X 7 high

Altraco W-SS-9936 Mini Screwdriver & Pliers Set

Finger tip turning speed handle caps High impact molded handles Black oxide hardened and tempered magnetic tip Includes 6 Pc Mini Screwdrivers, 1 Pc 5 Long Nose Pliers, 1 Pc 5 Cutting Nippers, 1 Pc 5 Tweezers

Altraco MT-06 6 Pc Telescoping Gage Set

For true measurement of hole, slot or recess from 5/16 ? 6Plunger expands in hole to be measuredKnurl locks the setting for sizing with micrometer or caliperSatin chrome finishIn plastic folding pouch

Altraco MKE-03 Digital Measuring Tool Set

Measuring tool set includes 6 Electronic Caliper MCE-6A, 0-1 Digital Micrometer MD-01, 6 Steel Ruler Stainless

Altraco SHT-29H 29 Pcs Tin Coated H.S. Jobber Drill Set

Size 1/16-1/2 X 64ths, Box HUOT USA

Altraco SHS-29B 29 Pc H.S. Jobber Drill Set, Black Finish

Size 1/16-1/2 X 64ths

Altraco SHS-29S 29 Pc H.S. Jobber Drill Set, Black Finish

Size 1/16-1/2Shank 3/8, Box HUOT USA

Altraco SHS-115 115 Pc H.S. Jobber Drill Set, Black Finish

Set includes 29 Pc Fractional Set 1/16-1/2, 60 Pc Wires Sizes #1 - 60, 26 Pc Letter Sizes A-Z

Altraco SHS-29R 29 Pc H.S. Jobber Drill Set, Black Finish

Size 1/16-1/2 x 1/64th with 3/8 reduced shank Box Huot metal index box

Denver Tools 502 150mm Air Hammer

The Denver Tools 502 is a 150mm Air Hammer which comes with 4 chisels.

Denver Tools 301 Jitterburg Sander

The Denver Tools 301 is a pneumatic Jitterburg Sander. This traditional style jitterbug sander with metal construction features a rubber grip and locking clamps to give you a good grip on both the tool and the sandpaper. This sander can be used on many materials including paint, metal and fiberglass.

Denver Tools 816A Air Angle Die Grinder

The Denver Tools 816A is a Air Angle Die Grinder. The angled head provides access to hard to reach places.

Denver Tools 653A 3/8-Inch In-line Air Drill

The Denver Tools 653A is a 3/8-Inch In-line Air Drill with variable speed. This small drill makes drilling in tight spaces easy.

Denver Tools 93486 Mini Grease Gun

The Denver Tools 93486 is a Mini Grease Gun. This small, one-hand operated grease gun is perfect for greasing in tight spaces.

Denver Tools RM016 16 oz Rubber Mallet

The Denver Tools RM016 is a 16 oz Rubber Mallet. This mallet features a double-faced rubber head with a rubber gripped handle.

Denver Tools SC02 1/4-Inch Swivel Connector

The Denver Tools SC02 is a 1/4-Inch Swivel Connector. This connector has a 360 swivel to prevent the air hose from kinking.

Denver Tools 120019 Brad Nailer

The Denver Tools 120021 Brad Nailer drives 18 gauge brad nails from 15mm to 50mm in length. A die cast aluminum body makes this nailer strong and light-weight while a rubber comfort grip handle provides improved control and comfort even during extended use. A touch-strike security system increases safety for the operator and a new 2 spring magizine pushes the nails smoothly. This nailer is ideal for door and window trims, decorative trim, cabinet work, finish paneling, frames and flooring.

Denver Tools 95439 Air Control Unit

The Denver Tools 95439 is an Air Control Unit. This air control unit consists of an air filter, air regulator and an oiler. It helps prevent costly damage to your air tools caused by rust, scale and moisture. It provides clean, dry, regulated air over a wide range of air flows. It is easy to install and maintain.

Denver Tools DBH24 24-Ounce Dead Blow Hammer

The Denver Tools DBH24 is a 24-ounce dead blow hammer. This steel shot filled, bright orange dead blow hammer is an essential part of anyone's toolbox.

Denver Tools ABG2 Air Blow Gun

The Denver Tools ABG2 is an Air Blow Gun featuring a comfortable vinyl coated control lever and durable chrome plated zince cast body.

Denver Tools RBC012 12-Inch Ratchet Bar Clamp

The Denver Tools RBC012 is a 12-Inch Ratchet Bar Clamp. It is a general purpose clamp that can be used on a variety of different tasks around the jobsite and the home.

Denver Tools 650 3/8-Inch Keyless Air Drill

The Denver Tools 650 is a 3/8-Inch Keyless Air Drill with an easily accessible forward/reverse switch making it easy to use with one hand.

Denver Tools AR2 Brass Air Regulator with Gauge

The Denver Tools AR2 is a Brass Air Regulator with Gauge. This regulator and guage allow you to monitor and control the air flow and pressure of your compressor.

Denver Tools 703A 3/8-Inch Driver Air Ratchet Wrench

The Denver Tools 703A is a 3/8-Inch Driver Air Ratchet Wrench.

Denver Tools 113 Air Body Saw (Front Exhaust)

The Denver Tools 113 is a Air Body Saw with Front Exhaust.

Denver Tools DHTCZ-1 Zine Dual Head Tire Chuck

The Denver Tools DHTCZ-1 is a Zine Dual Head Tire Chuck for inflating tires.

Denver Tools TC1 Air Brass Tire Chuck

The Denver Tools TC1 is a Air Brass Tire Chuck. This solid brass air chuck has a standard 1/4-Inch NPT fitting and can be used to inflate various types of tires.

Denver Tools 94346 Mini Air Line Filter

The Denver Tools 94346 is a Mini Air Line Filter. This 40 micron particle filter can operate at up to 135 PSI and 140 degrees Fahrenheit. The reservoir of this filter is made of durable polycarbonate and features a push style drain.

Denver Tools 811B 1/4-Inch Air Die Grinder

The Denver Tools 811B is a 1/4-Inch Air Die Grinder. This powerful air die grinder is compact and lightweight making it easy to use for most grinding, deburring and polishing applications.

Denver Tools ABK2 Professional Air Brush Kit

The Denver Tools ABK2 is a Professional Air Brush Kit. This kit includes everything needed for painting model cars, trains and art detail projects, stenciling, stippling, base coats and much more.

Denver Tools 93703 3 Piece Ratchet Set

The Denver Tools 93703 is a 3 Piece Ratchet Set with 1/4-Inch, 3/8-Inch and 1/2-Inch drives. Each ratchet wrench is 8-Inches long and features a non-slip cushion grip for better grip and comfort.

Denver Tools 19212810 1/2-Inch Electric Impact Wrench

The Denver Tools 12810 is a 1/2-Inch Heavy Duty Industrial Electric Impact Wrench. The 19212810 Electric Impact Wrench has a reversiable 7.5amp moter and rugged die cast aluminum gear housing. A rocker trigger allows for easy one-hand operation.

Denver Tools 417002 3/8-Inch Electric Angle Drill

The Denver Tools 417002 is a 3/8-Inch Electric Angle Drill. This reversible drill features an easy to operate pull on/off paddle switch and a locking mechanism for continuous rotation. The ergonomic design and 55 degree angled chuck this drill easy to use in confined working areas.

Denver Tools 280 Air In-Line Sander

The Denver Tools 280 is an Air In-Line Sander. This in-line sander features a conveinent push trigger on the handle so you don't have to take your hands off the tool to flip a switch. There is also a standard knob in the front of the sander for two handed operation, giving you better control over the movement of the sander.

Denver Tools QC1 5-Piece Brass Quick Coupler Set

The Denver Tools QC1 is a 5-piece set of quick couplers.  These durable brass couplers allow you to easily and quickly connect your air tools to an air hose.

Denver Tools 610003 6 Ton Hydraulic Bottle Jack

The Denver Tools 610003 is a 6 Ton Hydraulic Bottle Jack. This compact jack is durable and easy to use.

Denver Tools 610004 8 Ton Hydraulic Bottle Jack

The Denver Tools 610004 is a 8 Ton Hydraulic Bottle Jack. This compact jack is durable and easy to use.

Denver Tools 610002 4 Ton Hydraulic Bottle Jack

The Denver Tools 610002 is a 4 Ton Hydraulic Bottle Jack. This compact jack is durable and easy to use.

Denver Tools 610001 2 Ton Hydraulic Bottle Jack

The Denver Tools 610001 is a 2 Ton Hydraulic Bottle Jack. This compact jack is durable and easy to use.

Denver Tools MSS10 5 Piece 1/8-Inch Die Grinding Stone Set

The Denver Tools MSS10 is a 5 Piece 1/8-Inch Die Grinding Stone Set with 5 assorted mounted grinding stones.

Denver Tools MSS101 5 Piece 1/4-Inch Die Grinding Stone Set

The Denver Tools MSS101 is a 5 Piece 1/4-Inch Die Grinding Stone Set with 5 assorted mounted grinding stones.

Delta 50-274 Mobile Base for Delta Tools

The Delta 50-274 is a mobile base for delta tools. Delta mobile base provides stationary machines with increased mobility for positioning them at any place, whether its across the shop or out-of-the-way for convenient storage. Delta mobile bases are made of heavy-gage steel and feature a foot-operated control lever that raises and lowers the base for easy movement and positioning.

Denver Tools 613002 2 Ton Engine Crane

The Denver Tools 613002 is a 2 Ton Engine Crane. This engine crane has four settings for half ton, full ton, one and a half ton and two ton loads and features a hydraulic action pump for easy lifting. The legs and easily fold up into the body for easy storage and four caster wheels are attached to the bottom of the main body so it can easily be rolled away.

Couldn't find Altraco Toolshere? Are you looking for something else? Search our partner sites:

                                                            Altraco Tools