Toolrr - Air Conditioning

Automotive / Air Conditioning

A/C Gauges, Hoses, Adapters, Tanks Conversion/Flush/Repair Kits Dye Filters, Dust Covers Leak Detection Refrigerant Tools

Air Conditioning tools and information

Find Air Conditioning at best prices and buy!

Great Neck 25052 Air Conditioning and Fuel Line Disconnect Tool Set

The Great Neck 25052 is an Air Conditioning and Fuel Line Disconnect Tool Set. The air conditioning and fuel line disconnect tool set easily disconnects air conditioning lines and quick connect fuel lines. It includes sizes 5/16 3/8, 1/2, 5/8, 3/4, 7/8.

Performance W10056 Air Tank Manifold

Air manifold

Denver Tools 95439 Air Control Unit

The Denver Tools 95439 is an Air Control Unit. This air control unit consists of an air filter, air regulator and an oiler. It helps prevent costly damage to your air tools caused by rust, scale and moisture. It provides clean, dry, regulated air over a wide range of air flows. It is easy to install and maintain.

Mechanics M553C Air Nibbler Punches

Replacement punches for air nibbler M552DB 2-pieces per package

Flex 257004 Rubber Air Roller with Air Pump for LP 1503 VR Sander

The Flex 257004 is a Rubber Air Roller with Air Pump for LP 1503 VR Sander. The rubber air roller with air pump and ring fastener is used for sensitive contour sanding and sanding curved surfaces. The air roller prevents heat accumulation so the tool remains cool, preventing stainless steel from blemishing.

Denver Tools 502 150mm Air Hammer

The Denver Tools 502 is a 150mm Air Hammer which comes with 4 chisels.

Denver Tools AR2 Brass Air Regulator with Gauge

The Denver Tools AR2 is a Brass Air Regulator with Gauge. This regulator and guage allow you to monitor and control the air flow and pressure of your compressor.

Denver Tools 811B 1/4-Inch Air Die Grinder

The Denver Tools 811B is a 1/4-Inch Air Die Grinder. This powerful air die grinder is compact and lightweight making it easy to use for most grinding, deburring and polishing applications.

Denver Tools TC1 Air Brass Tire Chuck

The Denver Tools TC1 is a Air Brass Tire Chuck. This solid brass air chuck has a standard 1/4-Inch NPT fitting and can be used to inflate various types of tires.

Steel City 65101 Electrostatic Filter for Air Cleaners

Filters finer dust to five microns and is washable and re-usable. Designed for all air cleaners.

Denver Tools 816A Air Angle Die Grinder

The Denver Tools 816A is a Air Angle Die Grinder. The angled head provides access to hard to reach places.

Denver Tools 653A 3/8-Inch In-line Air Drill

The Denver Tools 653A is a 3/8-Inch In-line Air Drill with variable speed. This small drill makes drilling in tight spaces easy.

Grip 10760 Three-Way Air Manifold

Solid brass manifold; accepts (3) air couplers at one time 1/4" inlet and outlet threads

Acme® A815BL 1/4Inch Ball Foot Air Chuck

1/4 female NPT Close check for live air line use with non-gauged inflation Solid brass construction

Denver Tools 703A 3/8-Inch Driver Air Ratchet Wrench

The Denver Tools 703A is a 3/8-Inch Driver Air Ratchet Wrench.

Grip 12705 3/8-Inch x 50-Foot Rubber Air Hose

The Grip 12705 is a 3/8-Inch x 50-Foott Rubber Air Hose Gray.

Denver Tools 113 Air Body Saw (Front Exhaust)

The Denver Tools 113 is a Air Body Saw with Front Exhaust.

Denver Tools 650 3/8-Inch Keyless Air Drill

The Denver Tools 650 is a 3/8-Inch Keyless Air Drill with an easily accessible forward/reverse switch making it easy to use with one hand.

Denver Tools ABG2 Air Blow Gun

The Denver Tools ABG2 is an Air Blow Gun featuring a comfortable vinyl coated control lever and durable chrome plated zince cast body.

Denver Tools PAK7 16 PC Air Tool Accessory Kit

The Denver Tools PAK7 is a 16 piece Air Tool Accessory Kit that includes several heavy duty components designed to optimize air tool operation.

Denver Tools ABG5 24-Inch Professional Air Blow Gun

The Denver Tools ABG5 is a 24-Inch Professional Air Blow Gun. This air gun included a rubber tip as well as a 24-Inch wand attachment.

Denver Tools AHPE02 1/4-Inch x 50-Foot Recoil Air Hose

The Denver Tools AHPE02 is a 1/4-Inch x 50-Foot Recoil Air Hose. This self storing air hose snaps back into shape just like a telephone cord.

Denver Tools A280 Air Flow Regulator with Pressure Gauge

The Denver Tools A280 is an Air Flow Regulator with Pressure Gauge. This regulator and guage allow you to monitor and control the air flow and pressure of your compressor.

Denver Tools ABG3 5 Piece Air Blow Gun Kit

The Denver Tools ABG3 is a 5 Piece Air Blow Gun Kit. This kit comes with a nickel plated brass body air gun and four assorted tips.

Chicago Pneumatic 0367010060 Replacement V-Belt for the QRS10 Air Compressors

The Chicago Pneumatic 0367010060 is a replacement belt for the QRS10 Air Compressors. The 0367010060 helps maintain superior function of your QRS Air Compressors.

Denver Tools AHPE01 1/4-Inch x 25-Foot Recoil Air Hose

The Denver Tools AHPE01 is a 1/4-Inch x 25-Foot Recoil Air Hose. This self storing air hose snaps back into shape just like a telephone cord.

Max AKHL1050E 400psi High Pressure Air Compressor

Max AKHL1050E is 400 psi High Pressure Air Compressor developed for PowerLite next generation high pressure nailers. It is equipped with DC Brushless Motor which is more powerful, quieter and lighter when compared to the conventional motors. Also the inverter circuit at the motor adjusts the RPM to extract the maximum performance depending on the voltage level. The AKHL1050E also has a 3 fan cooling system which makes a special air flow and minimizes heat build up of the motor. It is also equipped with a safety relief valve which works when air pressure exceeds 435 psi and the 1200h motor was durable enough to withstand lab testing without any maintenance necessary.

Denver Tools 94346 Mini Air Line Filter

The Denver Tools 94346 is a Mini Air Line Filter. This 40 micron particle filter can operate at up to 135 PSI and 140 degrees Fahrenheit. The reservoir of this filter is made of durable polycarbonate and features a push style drain.

Denver Tools ABK2 Professional Air Brush Kit

The Denver Tools ABK2 is a Professional Air Brush Kit. This kit includes everything needed for painting model cars, trains and art detail projects, stenciling, stippling, base coats and much more.

Grip 12673 Goodyear 50-Foot x 3/8-Inch Air Hose

The Grip 12673 is a Goodyear 50-Foot Air Hose. The hose is ideal for use with an air compressor. It is designed to help power all types of pneumatic tools including staple guns, brad nailers, spray guns, air ratchets and more. The rubber hose is weather, oil and solvent resistant.

Chicago Pneumatic CP785 3/8Inch General Duty Air Drill

-Powerful energy efficient air motor resists stalls-Triple idler planetary gearing for smooth operation and extended tool life-Handle exhaust reduces noise and directs air away from work area-Ideal for accessory and air conditioner installation, engine work and auto body repair-Free Speed 2,400 rpm

Festool PA3691126 Air Tool Pack

ToolKing.com promotional discount codes or coupons are NOT valid on Festool products-LEX 2 150/3- Ergonomic softgrip housing cap-Deadman switch-Eccentric stroke marked on switch-Sanding pad brake-Jetstream pad design (air flowing out through an additional in the center of the sanding pad)-MPE pad-Hook-and-loop abrasive mounting-CT 33-8.7 gal. (33 L) capacity-HEPA filter elements filter down to 0.3 micron-Larger wheels provide stability and ease of movement-Locking brake on rear wheels means no accidental movement of the dust extractor-Large flat area for tools or Systainer stacking-Tool-triggered or manual on-off switch with smooth start-up and shut-off delay-Replaceable filter bag-Stepless electronic suction control-Wet and dry extraction with no complicated conversion-Integrated cleaning device (scratcher) cleans the filter in the blink of an eye-Blower port-Standard antistatic equipment protects against electrostatic charging

Acme® A820BL 1/4Inch Closed Ball Foot Air Chuck and Chuck Clip

1/4 female NPT Close check for live air line use with non-gauged inflation Solid brass construction

Hobart 500534 Airforce 250CI Plasma Cutter with Air Compressor

The Hobart 500534 is an Airforce 250CI Plasma Cutter with Air Compressor. The Airforce 250CI uses an electrical arc and compressed air to cut steel, aluminum and other conductive metals. It is designed to cut up to 1/4 inch steel by using a standard household current. It features a built-in air compressor and lightweight inverter power supply which make this Plasma Cutter the most convenient, totally portable cutting system available. The Air force 250CI excels at cutting sheet metal and 1/8 inch mild steel.

Chicago Pneumatic CP715 Heavy Duty Air Hammer

-Chicago Pneumatic CP715 Heavy Duty Air Hammer-Longer piston strokes for more force per blow-Integral muffler minimizes exhaust sound-Ideal for bolt and rivet shearing, bushing driving and overall front end work

Denver Tools 280 Air In-Line Sander

The Denver Tools 280 is an Air In-Line Sander. This in-line sander features a conveinent push trigger on the handle so you don't have to take your hands off the tool to flip a switch. There is also a standard knob in the front of the sander for two handed operation, giving you better control over the movement of the sander.

Chicago Pneumatic CP717 Super Duty Air Hammer

-Most powerful CP air hammer for automotive, truck and off-road equipment-Positive action trigger for precise control-Ideal for front end work, king pin removal and installation of bulldozer walking beams, removal of truck springs and heavy duty spring bushings

Chicago Pneumatic CP883 Air Hydraulic Riveter

-Vacuum assist system designed for efficiency in downward riveting-Cylinder cap with storage area for spare nose pieces-Universal air inlet swivel to allow more maneuverability-Three piece jaw set-Rubber boot protects tool and work surface-Comes complete with 1/8, 5/32 and 3/16 nose pieces

Titan 19360 4Inch Adjustable Pressure Air Blow Gun

-Variable air pressure control-Allows for quick removal of dust and dirt particles from hard to reach places-Durable plastic body-Stainless steel nozzle

Denver Tools 702A 1/2-Inch Drive Air Impact Wrench

The Denver Tools 702A is a 1/2-Inch Drive Air Impact Wrench. This heavy duty, reversible impact wrench is designed for use in automotive applications.

Porter Cable C2550 4 Gallon, 150 PSI Portable Air Compressor

-2.5 HP (peak), 1.3 HP (running) 4 gallon, mobile, contractor, pancake style tank air compressor-Two-pole, 3450 RPM capacitor start induction motor for maximum air delivery-Heavy duty, cast iron cylinder construction and large 8 oz. oil capacity to assure long life-High-flo air regulator and push-to-connect coupler-12 Amp current required - Low 12 Amp motor draw prevents accidental tripping of circuit breaker-Cushioned handle for improved comfort and grip. -Frame provides increased mobility; two pick-up points and protection for pump and motor.-4 gallon storage capacity air tank supports heavy usage of brad nailers, staplers, and finish nailers; moderate usage of roofing and framing nailers-CUL listed with ASME safety valve to meet all codes-Air delivery 5.4 SCFM @ 40 PSI, 4.4 SCFM @ 90 PSI83 dBA - quiet operation, Higher 120 PSI cut-in pressure provides 30 PSI of bonus air before a 90 PSI rated air tool becomes inoperable

Denver Tools ATI6 Air Tire Inflator with 120 PSI Capacity

The Denver Tools ATI6 is an Air Tire Inflator with 120 PSI capacity. This easy to use tire inflator features a tire chuck with offset head and features a built in gauge with pressure capacity up to 120 PSI.

Safety Speed Cut 3430TR2 Air Clamp System for TR2 Table Router

Safety Speed Cut 3430TR2 is an Air Clamp System for TR2. It is a pneumatic material hold-down clamp for mounting materials to the Table Router and hold them in place to avoid slippage during use.

Denver Tools 302 5-Inch Air High Speed Sander

The Denver Tools 302 is a 5-Inch Air High Speed Sander. This heavy duty pneumatic sander is very lightweight and campact. A trigger style switch makes this sander very easy to operate one handed.

Denver Tools 705A 1/2-Inch Air Impact Wrench(Twin Hammer Mechanism)

Denver Tools 705A is a heavy duty 1/2-Inch Air Impact Wrench which features a twin hammer mechanism. The Impact Wrench has both a forward as well as a reverse setting with three speeds for the forward setting.

Denver Tools 210010 2HP 30 Liter Oilless Air Compressor

Denver Tools 210010 is a 2 HP 30 Liter Oilless Air Compressor. This small compressor is highly portable making it perfect for working on site or for those with limited work space.

Chicago Pneumatic CP7110K Heavy Duty Air Hammer Kit

-Chicago Pneumatic CP7110K Heavy Duty Air Hammer Kit-Patented Vibration Reduction Mechanism reduces vibration 45% over other models-Feather Trigger for great control to do a wide range of jobs-More Durable lasts as long as air hammers costing twice as much-Powerful with 3200 blows per minute and a 2.25 piston stroke

Chicago Pneumatic CP828 3/8Inch Heavy-Duty Air Ratchet, 150 RPM

The Chicago Pneumatic CP828 is a 3/8 Heavy-Duty Air Ratchet. It features a new TriSpring anti-slip head design which virtually eliminates slippage while reducing the potential for heat build-up, even in long run downs. The ratchet is compact in size, yet is packed with power and speed. It delivers a ultimate torque of 50 ft-lbs. The air ratchet has an ergonomic, square-handle design which gives a positive and comfortable grip.